On Fri, Sep 06, 2002 at 11:15:54AM +1000, DL wrote:
>
>
> I am looking for assistance on how to resolve an issue with getting
> the Keyspan USA-19Qi USB to serial port adaptor to work with a vanilla
> build of Redhat 7.3. I noticed in the error log that the USA-19Qi is
> registered without firmware and am concerned this is causing the
> problem.
As you've proven, you can't apply the patch on that site to the 7.3
kernel, sorry. To get this device to work you can do one of the
following 3 things:
1) start with a clean 2.4.18 kernel and apply the keyspan patch.
2) start with a clean 2.4.19 kernel, apply the 2.4.20-pre5 patch,
and these two patches:
http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-keyspan-2.4.20-pre5.patch
http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-usbserial-2.4.20-pre5.patch
3) get the latest (2.5.33 as of right now) kernel as it already
has support for this device.
I would recommend options 2 or 3.
Good luck,
greg k-h
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
