On Mon, Sep 09, 2002 at 08:39:01AM -0700, Abinash Yadav wrote:
> Hi,
> I am trying to use this device with my linux box
> (2.4.19).
>
> i selected this hub (over serial port) becuase of high
> baudrate it can support.
Serial port PCI cards will always work better than a USB to serial
device, if for no other reason than the latency involved in getting the
data on a USB device across the PCI bus, across the USB connection, to
the uart on the converter. If you are really worried about speed, I
would consider changing hardware :)
> now my problem here is, i do not know how to configure
> (program) various settings using linux/C, like
> Hardware Flow Control, Baudrate, parity, start/Stop
> bits.
Please see one of the many Linux serial port programming HOWTOs. A
_very_ good one written by Vern Hoxie is at:
ftp://scicom.alphacdc.com/pub/linux
Good luck,
greg k-h
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
