Hello I have a digital camera, that it's supposted to work as a mass storage device, I set to buidin the mass storage (and all sup-options) in the kernel and the scsci generic support, and scsi support for disk, tapes, floppy, etc etc, I rebooted the pc, with the cam connected and I got:
usb.c: USB device 2 (vend/prod 0x919/0x100) is not claimed by any active driver. and in /proc/scsi/scsi I only have: Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-RW GCE-8240B Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 (I'm using generic scsi support with my cdrom, in order to be able to write using cdrtools) any ideas or steps that I miss? -- --Paco "Open Source, Open Mind" "Slackware, sending kiddies to /dev/null, since 1993" ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
