I'm trying to get a Philips 690K WebCam to work on a Sony Vaio PCG-FX220. RedHat 7.2 upgraded to kernel 2.4.19.
The usb and webcam modules load without error but the webcam doesn't show up in /proc/bus/usb/devices and there is no /proc/video tree. Can someone point tell me what's wrong or point me in a troubleshooting direction? This is the output from lsmod: Module Size Used by audio 38048 0 (unused) pwcx 87072 0 (unused) pwc 42848 0 [pwcx] videodev 3968 0 [pwc] i810_audio 20528 0 (autoclean) serial 43408 0 (autoclean) isa-pnp 29024 0 (autoclean) [serial] ext3 58000 1 (autoclean) jbd 36976 1 (autoclean) [ext3] uhci 24128 0 (unused) usbcore 56640 1 [audio pwc uhci] The output from /proc/bus/usb/devices isT: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI-alt Root Hub S: SerialNumber=2400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI-alt Root Hub S: SerialNumber=1820 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms >From /var/log/messages it looks like the problem is with the usb driver/device: Oct 6 12:47:41 localhost kernel: usb.c: registered new driver Philips webcam Oct 6 12:47:41 localhost kernel: pwc Philips webcam decompressor routines version 8.2 Oct 6 12:47:41 localhost kernel: pwc Supports all cameras supported by the main module (pwc). Oct 6 12:47:44 localhost kernel: usb.c: registered new driver audio Oct 6 12:47:44 localhost kernel: audio.c: v1.0.0:USB Audio Class driver Oct 6 12:48:56 localhost kernel: hub.c: USB new device connect on bus1/2, assigned device number 2Oct 6 12:48:59 localhost kernel: usb_control/bulk_msg: timeout Oct 6 12:48:59 localhost kernel: usb.c: USB device not accepting new address=2 (error=-110) Oct 6 12:48:59 localhost kernel: hub.c: USB new device connect on bus1/2, assigned device number 3 Oct 6 12:49:02 localhost kernel: usb_control/bulk_msg: timeout Oct 6 12:49:02 localhost kernel: usb.c: USB device not accepting new address=3 (error=-110) How should I capture more troubleshooting information? Thanks, Bill Whiting ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
