On Mon, Oct 07, 2002 at 10:45:27AM +0100, Ged Haywood wrote:
> Hi there,
>
> On Mon, 7 Oct 2002, Pedro Alves wrote:
>
> > I cannot access my fuji finepix F401 using kernel 2.4.18.
> [snip]
> > What can I do here? googled and found nothing :(
>
> I had problems with FinePix2800Zoom and 2.4.18 which went away
> when I upgraded to 2.4.19.
>
Using 2.4.19 I cannot connect either. Here goes the usb-storage debug
Thanks in advance!
__________________
act_altsettting is 0
id_index calculated to be: 77
Array length appears to be: 86
USB Mass Storage device detected
Endpoints: In: 0xddb25fa0 Out: 0xddb25fb4 Int: 0xddb25fc8 (Period 1)
New GUID 04cb01142b1fb10004001067
Transport: Control/Bulk/Interrupt
Protocol: 8070i
Allocating IRQ for CBI transport
usb_submit_urb() returns 0
*** thread sleeping.
queuecommand() called
*** thread awakened.
Command INQUIRY (6 bytes)
12 00 00 00 ff 00 00 00 00 00 00 00
Call to usb_stor_control_msg() returned 12
usb_stor_transfer_partial(): xfer 255 bytes
USB IRQ received for device on host 0
-- IRQ data length is 2
-- IRQ state is 0
-- Interrupt Status (0x29, 0x0)
-- not a command-completion IRQ
usb_stor_bulk_msg() returned 0 xferred 36/255
CBI data stage result is 0x1
Current value of ip_waitq is: 0
command_abort() called
-- simulating missing IRQ
-- nothing to abort
device_reset() called
CB_reset() called
Did not get interrupt on CBI
-- transport indicates command was aborted
scsi command aborted
*** thread sleeping.
CB_reset: clearing endpoint halt
usb_stor_clear_halt: result=0
usb_stor_clear_halt: result=0
CB_reset done
queuecommand() called
*** thread awakened.
Command TEST_UNIT_READY (6 bytes)
00 00 00 00 00 00 00 00 00 00 00 00
Call to usb_stor_control_msg() returned -32
-- Stall on control pipe. Clearing
USB IRQ received for device on host 0
-- IRQ data length is 2
-- IRQ state is 0
-- Interrupt Status (0x29, 0x0)
-- not a command-completion IRQ
usb_stor_clear_halt: result=0
-- transport indicates command failure
Issuing auto-REQUEST_SENSE
Call to usb_stor_control_msg() returned 12
usb_stor_transfer_partial(): xfer 18 bytes
USB IRQ received for device on host 0
-- IRQ data length is 2
-- IRQ state is 0
-- Interrupt Status (0x0, 0x0)
-- Current value of ip_waitq is: 0
usb_stor_bulk_msg() returned 0 xferred 18/18
usb_stor_transfer_partial(): transfer complete
CBI data stage result is 0x0
Current value of ip_waitq is: 1
Got interrupt data (0x0, 0x0)
-- Result from auto-sense is 0
-- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
Unit Attention: device reset occurred
scsi cmd done, result=0x2
*** thread sleeping.
queuecommand() called
*** thread awakened.
Command INQUIRY (6 bytes)
12 00 00 00 ff 00 00 00 00 00 00 00
Call to usb_stor_control_msg() returned 12
usb_stor_transfer_partial(): xfer 255 bytes
usb_stor_bulk_msg() returned 0 xferred 36/255
CBI data stage result is 0x1
Current value of ip_waitq is: 0
USB IRQ received for device on host 0
-- IRQ data length is 2
-- IRQ state is 0
-- Interrupt Status (0x28, 0x0)
-- not a command-completion IRQ
command_abort() called
-- simulating missing IRQ
-- nothing to abort
bus_reset() called
-- releasing irq URB
Did not get interrupt on CBI
-- transport indicates command was aborted
scsi command aborted
*** thread sleeping.
USB IRQ received for device on host 0
-- IRQ data length is 0
-- IRQ state is -2
-- Interrupt Status (0x28, 0x0)
-- IRQ too short
-- usb_unlink_urb() returned 0
--
Pedro Miguel G. Alves [EMAIL PROTECTED]
THINK - Tecnologias de Informa��o www.think.pt
Tel: +351 21 412 56 56 Av. Jos� Gomes Ferreira
Fax: +351 21 412 56 57 n� 13 1495-139 ALG�S
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
