Hi. I'm trying to connect a Fuji Finepix F401 digital camera using kernel 2.4.19. And I'm not having success (I guess you already figured that out :) ).
When I load usb-uhci and usb storage I cannot mount the camera and I get the log below. One more funny thing: This happens with slack. With the same kernel and the same configurations (at least the usb part) in RH 7.3, after loading the modules, 5 seconds after I switched the camera On, the kernel freezes. Even before the mount. Can anyone help me out here? Thanks a lot Pedro Alves _______________________________ Usb-storage debug information act_altsettting is 0 id_index calculated to be: 64 Array length appears to be: 73 USB Mass Storage device detected Endpoints: In: 0xda290960 Out: 0xda290974 Int: 0xda290988 (Period 1) New GUID 04cb01142b1fb10004001067 Transport: Control/Bulk/Interrupt Protocol: 8070i Allocating IRQ for CBI transport usb_submit_urb() returns 0 *** thread sleeping. queuecommand() called *** thread awakened. Command INQUIRY (6 bytes) 12 00 00 00 ff 00 00 00 00 00 00 00 Call to usb_stor_control_msg() returned 12 usb_stor_transfer_partial(): xfer 255 bytes USB IRQ received for device on host 0 -- IRQ data length is 2 -- IRQ state is 0 -- Interrupt Status (0x29, 0x0) -- not a command-completion IRQ usb_stor_bulk_msg() returned 0 xferred 36/255 CBI data stage result is 0x1 Current value of ip_waitq is: 0 command_abort() called -- simulating missing IRQ -- nothing to abort device_reset() called CB_reset() called Did not get interrupt on CBI -- transport indicates command was aborted scsi command aborted *** thread sleeping. CB_reset: clearing endpoint halt usb_stor_clear_halt: result=0 usb_stor_clear_halt: result=0 CB_reset done queuecommand() called *** thread awakened. Command TEST_UNIT_READY (6 bytes) 00 00 00 00 00 00 00 00 00 00 00 00 USB IRQ received for device on host 0 -- IRQ data length is 2 -- IRQ state is 0 -- Interrupt Status (0x29, 0x0) -- not a command-completion IRQ Call to usb_stor_control_msg() returned -32 -- Stall on control pipe. Clearing usb_stor_clear_halt: result=0 -- transport indicates command failure Issuing auto-REQUEST_SENSE Call to usb_stor_control_msg() returned 12 usb_stor_transfer_partial(): xfer 18 bytes USB IRQ received for device on host 0 -- IRQ data length is 2 -- IRQ state is 0 -- Interrupt Status (0x0, 0x0) -- Current value of ip_waitq is: 0 usb_stor_bulk_msg() returned 0 xferred 18/18 usb_stor_transfer_partial(): transfer complete CBI data stage result is 0x0 Current value of ip_waitq is: 1 Got interrupt data (0x0, 0x0) -- Result from auto-sense is 0 -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0 Unit Attention: device reset occurred scsi cmd done, result=0x2 *** thread sleeping. queuecommand() called *** thread awakened. Command INQUIRY (6 bytes) 12 00 00 00 ff 00 00 00 00 00 00 00 Call to usb_stor_control_msg() returned 12 usb_stor_transfer_partial(): xfer 255 bytes USB IRQ received for device on host 0 -- IRQ data length is 2 -- IRQ state is 0 -- Interrupt Status (0x28, 0x0) -- not a command-completion IRQ usb_stor_bulk_msg() returned 0 xferred 36/255 CBI data stage result is 0x1 Current value of ip_waitq is: 0 command_abort() called -- simulating missing IRQ -- nothing to abort bus_reset() called -- releasing irq URB Did not get interrupt on CBI -- transport indicates command was aborted scsi command aborted *** thread sleeping. USB IRQ received for device on host 0 -- IRQ data length is 2 -- IRQ state is -2 -- Interrupt Status (0x28, 0x0) -- device has been removed -- usb_unlink_urb() returned 0 ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
