Have you tried a 2.5 kernel? Matt
On Sun, Oct 13, 2002 at 12:51:11PM +0100, Andre Cruz wrote: > Hello. I'm having problems accessing my reader. I think > USB-storage sees it but there's no SCSI drive attached. > > The system is a Redhat 8.0 with LUN SCSI_MULTI_LUN enabled in > the kernel. > > The reader has a CF and a SM slot. > > Here are the logfiles: > > dmesg: > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 89 > usb-storage: Array length appears to be: 91 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xc1933fb4 Out: 0xc1933fa0 Int: > 0x00000000 (Period 0) > usb-storage: New GUID 0aec5010aec501000001a003 > usb-storage: GetMaxLUN command result is 1, data is 1 > usb-storage: Transport: Bulk > usb-storage: Protocol: Transparent SCSI > usb-storage: *** thread sleeping. > scsi0 : SCSI emulation for USB Mass Storage devices > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 ff 00 9b ef ac 80 f6 ee > usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F > 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 255 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255 > usb-storage: Bulk data transfer result 0x1 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 18 F > 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 > usb-storage: Not Ready: media not present > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (1/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (2/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (3/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (4/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (5/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (6/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (7/0) > usb-storage: *** thread sleeping. > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 3 > usb.c: usb-storage driver claimed interface c1932ee0 > USB Mass Storage support registered. > > /proc/scsi/scsi > > Attached devices: none > > /proc/scsi/usb-storage-0/0 > > Host scsi0: usb-storage > Vendor: > Product: USB Storage Device > Serial Number: 0AEC501000001A003 > Protocol: Transparent SCSI > Transport: Bulk > GUID: 0aec5010aec501000001a003 > Attached: Yes > > /proc/bus/usb/devices > only relevant part shown > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 > P: Vendor=0aec ProdID=5010 Rev= 1.00 > S: Manufacturer= > S: Product= USB Storage Device > S: SerialNumber=0AEC501000001A003 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > Please help. Tell me if more info is needed. > btw. The device works fine in windows xp. > Thanks > > > -------------------------------------------- > SAPO ADSL.PT Agora o kit apenas por 75 Eur. e tr�fego ilimitado at� ao final de 2002! > Mais informa��es em http://www.sapo.pt/kitadsl > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver What, are you one of those Microsoft-bashing Linux freaks? -- Customer to Greg User Friendly, 2/10/1999
msg05191/pgp00000.pgp
Description: PGP signature
