Hello,
I bought Datafab USB memory card drive and two memory card with
it. The first one is 8MB SD card made by Panasonic and the other one
is a 64MB MultiMediaCard by Verbatim. The SD card seems to work ok,
but I'm having some trouble mounting the MMC. Curiously, running
sfdisk on the related scsi device seems to temporarily fix the thing,
but I have to redo it every time I insert the drive. I'm using the
card with my Minolta Dimage X camera. Please, see below for system
information.
[root@teppo root]# mount /mnt/sda1
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
[root@teppo root]# sfdisk /dev/sda
Checking that no-one is using this disk right now ...
OK
Disk /dev/sda: 490 cylinders, 8 heads, 32 sectors/track
Old situation:
Units = cylinders of 131072 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 * 0+ 488 489- 62576 6 FAT16
/dev/sda2 0 - 0 0 0 Empty
/dev/sda3 0 - 0 0 0 Empty
/dev/sda4 0 - 0 0 0 Empty
Input in the following format; absent fields get a default value.
<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>
Usually you only need to specify <start> and <size> (and perhaps <type>).
/dev/sda1 :New situation:
No partitions found
sfdisk: no partition table present.
[root@teppo root]# mount /mnt/sda1
[root@teppo root]# ls /mnt/sda1/
dcim
[root@teppo root]#
[root@teppo root]# uname -a
Linux teppo 2.4.20-rc1 #3 Thu Nov 14 00:09:29 EET 2002 i686 unknown
[root@teppo root]# cat /proc/bus/usb/
001 devices drivers
[root@teppo root]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=07c4 ProdID=ac01 Rev= 1.00
S: Manufacturer=Datafab
S: Product=Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@teppo root]# cat /proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: Datafab
Product: Mass Storage Device
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 07c4ac010000000000000000
Attached: Yes
[root@teppo root]#
[root@teppo root]# cat /proc/modules
cisco_ipsec 342448 0 (unused)
fvnetr_cs 61024 1
cs4281 44560 1 (autoclean)
soundcore 3568 3 (autoclean) [cs4281]
sd_mod 10272 0 (autoclean)
ipt_MASQUERADE 1280 1 (autoclean)
iptable_nat 14736 1 (autoclean) [ipt_MASQUERADE]
ipt_state 576 3 (autoclean)
iptable_filter 1680 1 (autoclean)
ip_tables 10976 6 [ipt_MASQUERADE iptable_nat ipt_state iptable_filter]
ip_conntrack_ftp 3824 0 (unused)
ip_conntrack 17392 3 [ipt_MASQUERADE iptable_nat ipt_state
ip_conntrack_ftp]
autofs 9152 0 (autoclean) (unused)
apm 9520 2
3c59x 25536 0
nls_iso8859-1 2832 1 (autoclean)
nls_cp437 4352 1 (autoclean)
vfat 9776 1 (autoclean)
fat 30464 0 (autoclean) [vfat]
reiserfs 164560 3 (autoclean)
usb-storage 78272 0
scsi_mod 85152 2 [sd_mod usb-storage]
usb-uhci 21568 0 (unused)
usbcore 63488 1 [usb-storage usb-uhci]
rtc 6048 0 (autoclean)
Any ideas? Thank you very much,
Teppo
--
Teppo Peltonen - [EMAIL PROTECTED] - 0407380441
-------------------------------------------------------
This sf.net email is sponsored by: Are you worried about
your web server security? Click here for a FREE Thawte
Apache SSL Guide and answer your Apache SSL security
needs: http://www.gothawte.com/rd523.html
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
