hello,
I try to make the USB mork on my machine but it is not so easy although almost all
seems to work.
--dmesg says a lot of good things after having load uhci.o and printer.o:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF c138e880, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: 6000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: ganged power switching
hub.c: standalone hub
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
etc.......... (see bellow)
but when I try to test the device /dev/lp0 :
# cat /dev/usb/lp0
cat: /dev/usb/lp0: No such device
but I have
crw-rw---- 1 root lp 180, 0 Oct 10 20:59 /dev/usb/lp0
What is the problem??
If someone have some Idea, please help
Alex
(End of text :)
.........
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c138e880
usb.c: registered new driver usblp
usb.c: deregistering driver usblp
usb.c: USB disconnect on device 1
usb.c: USB bus 1 deregistered
uhci.c: USB UHCI at I/O 0x6000, IRQ 11
uhci.c: detected 2 ports new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF c138e600, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: 6000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: ganged power switching
hub.c: standalone hub
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port 1 is removable
hub.c: port 2 is removable
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c138e600
usb.c: registered new driver usblp
-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
