I've been trying to get my HP5300C to work with linux-2.4.20-pre1, to no
avail. The hpusbscsi driver loads, but fails after;
--------------dmesg--------
hpusbscsi.c: [hpusbscsi_init:247] driver loaded, DebugLvel=2
usb.c: registered new driver hpusbscsi
hpusbscsi.c: [hpusbscsi_usb_probe:121] Allocated memory
scsi1 : hpusbscsi
hpusbscsi.c: [hpusbscsi_scsi_queuecommand:389] state= FREE
hpusbscsi.c: [hpusbscsi_scsi_queuecommand:399] state= BEGINNING
hpusbscsi.c: [simple_payload_callback:632] state= BEGINNING
hpusbscsi.c: [simple_payload_callback:635] state= WORKING
hpusbscsi.c: [hpusbscsi_scsi_abort:446] Request is canceled
hpusbscsi.c: [hpusbscsi_scsi_host_reset:435] SCSI reset requested
hpusbscsi.c: [control_interrupt_callback:473] Getting status byte 0
hpusbscsi.c: [hpusbscsi_scsi_host_reset:437] SCSI reset completed
scsi: device set offline - command error recover failed: host 1 channel
0 id 0 lun 0
---------------dmesg--------
The first time I try I can scan (kooka or xsane + sane-1.0.9 with
hp5300c patch), and I get about one tenth of an A4, before it hangs. If
I cancel the scan, the scanner apps recover, but the driver woun't
respond for a second scan. The system as such doesn't seem to degrade.
I use ide-scsi for my cd-burner, and the ohci+usbmouse for my logitech
usb mouse without problems.
My lspci;
-----------------
0:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 700f (rev 01)
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller
(rev 03)
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV]
00:08.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451
PCI AC-Lin k Controller Audio Device (rev 02)
00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C (rev 2 0)
00:0c.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
00:0f.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller
(rev 03)
00:10.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4)
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
00:13.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22 1394a-2000
Controller
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4336
-------------------------
My /proc/bus/usb/devices;
-------------------------
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d090d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=135/900 us (15%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d0903000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0701 Rev= 0.01
S: SerialNumber=TW06M21159VE
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=hpusbscsi
E: Ad=01(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c501 Rev= 9.10
S: Manufacturer=Logitech
S: Product=USB Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
D ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
Any ideas? Cheeres,
/Chris
-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
