hello
i ahve bought an usb box for my old graveur who works on 4x
but i have little problem when i test it
i don't have any /proc/bus/usb
but i have the hotplugscrit
i have a debian 3r00
please help me
26 15:22:25 attila kernel: hub.c: USB new device connect on bus1/1, assigned
device number 3
Dec 26 15:22:25 attila kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Dec 26 15:22:25 attila kernel: Vendor: IDE-CD Model: R/RW 4x4x32
Rev: 1.3B
Dec 26 15:22:25 attila kernel: Type: CD-ROM
ANSI SCSI revision: 02
Dec 26 15:22:25 attila kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0,
id 0, lun 0
Dec 26 15:22:25 attila kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw
xa/form2 cdda tray
Dec 26 15:22:25 attila kernel: WARNING: USB Mass Storage data integrity not
assured
Dec 26 15:22:25 attila kernel: USB Mass Storage device found at 3
Dec 26 15:22:29 attila /etc/hotplug/usb.agent: Setup 0x00 graveur for USB
product 55aa/1234/8
attila:~# cdrdao write --device 0,0,0 --speed 4
/media/work/temp/Pelicula1.mpg.cue
Cdrdao version 1.1.7 - (C) Andreas Mueller <[EMAIL PROTECTED]>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.
Using libscg version 'andreas-0.5-UNIXWARE_Patch'
0,0,0: IDE-CD R/RW 4x4x32 Rev: 1.3B
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options
0x0000)
Starting write at speed 4...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Using 16 byte P-Q sub-channel data mode.
Executing power calibration...
Power calibration successful.
Writing lead-in and gap...
?: Input/output error. : scsi sendcmd: no error
CDB: 2A 00 FF FF D5 4B 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 13 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming
ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.016s timeout 20s
ERROR: Write data failed.
ERROR: Writing failed.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
