Try reading the FAQ at http://www.linux-usb.org, it might help (depending on your kernel options).
On Sun, 26 Jan 2003, dan wrote: > hi everyone, > > i can't mount my secure digital card in my securemate sddr-73. > i've scoured the web for an answer but so far no luck. > > i know usb is working, and the card is ok, because i can read the card when its in >my (usb) camera with gphoto2. > > my system: > > uname -a > Linux localhost.localdomain 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002 i586 >unknown unknown GNU/Linux > > lsmod > scsi_mod 90372 4 [sd_mod sr_mod usb-storage] > > (amongst other things, so scsi support is switched on?) > > cat /proc/bus/usb/devices > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=e400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0ab0 ProdID=0001 Rev= 2.00 > S: Manufacturer=ARROW STRONG > S: Product=USB Mouse > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 40mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0781 ProdID=0830 Rev= 0.12 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms > > (sometimes i get manufacturer and product info as well) > (usb hub is version 1.00, imagemate is version 1.10 - problem?) > > cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: SanDisk Model: ImageMate CF-SD1 Rev: 0100 > Type: Direct-Access ANSI SCSI revision: 02 > > (shouldn't i see 2 devices here, as the sddr-73 has compact flash and secure digital >slots?) > > > cat /proc/scsi/usb-storage-0/0 > Host scsi0: usb-storage > Vendor: SanDisk > Product: ImageMate CF-SD > Serial Number: FBCD12346860 > Protocol: Transparent SCSI > Transport: Bulk > GUID: 078108300000fbcd12346860 > Attached: Yes > > cat /etc/fstab > /dev/sda1 /mnt/cf vfat >user,iocharset=iso8859-1,umask=0,nosuid,noauto,nodev,codepage=850,exec 0 0 > /dev/sdb1 /mnt/sd vfat >user,iocharset=iso8859-1,umask=0,nosuid,noauto,nodev,codepage=850,exec 0 0 > > (amongst other things, 50% guesswork 50% cribbage) > > this is all from a boot with no card in reader. > insert card in reader, then > > mount /mnt/sd > mount: special device /dev/sdb1 does not exist > mount /mnt/cf > mount: special device /dev/sda1 does not exist > > i've played around with the fstab entries without success. > > so i unplug reader then plug it in again (with card in slot)... > > tail -20 /var/log/messages > Jan 26 21:13:22 localhost kernel: usb.c: USB disconnect on device 4 > Jan 26 21:13:31 localhost kernel: hub.c: USB new device connect on bus1/2, assigned >device number 5 > Jan 26 21:13:35 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product >781/830/12 > > now when i > > cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: SanDisk Model: ImageMate CF-SD1 Rev: 0100 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: SanDisk Model: ImageMate CF-SD1 Rev: 0100 > Type: Direct-Access ANSI SCSI revision: 02 > > (so this time it realises there are 2 things, or its just added the same thing again >maybe) > > mount /mnt/sd > mount: special device /dev/sdb1 does not exist > mount /mnt/cf > mount: special device /dev/sda1 does not exist > > (no change) > > any ideas? > > > > > > > > > > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
