Hi, I'm trying to print with an HP PSC 750. I'm using the 2.4.20 kernel on a Soyo SY-KT333 Dragon Lite with an AMD Duron 1.3G. I can print successfully if I cycle the power on my printer each time. Otherwise I get:
printer.c: usblp0: error -84 reading printer status hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 100, change 2, 12 Mb/s hub.c: port 2 enable change, status 100 printer.c: usblp0: removed hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 1, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 101, change 1, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s hub.c: new USB device 00:11.2-2, assigned address 3 usb.c: kmalloc IF c753c1c0, numif 1 usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 usb.c: USB device number 3 default language ID 0x409 Manufacturer: Hewlett-Packard Product: PSC 750 SerialNumber: MY21PD10Z8WB printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1411 usb.c: usblp driver claimed interface c753c1c0 hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s I've tried using the hpoj, hpilj, and gimp-print drivers, each with the same result. Is there something obvious I'm overlooking? Thanks, Mike ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
