Hi, I just compiled a stock 2.4.20 kernel to try to get my new external
usb 2.0 ide drive to work. I'm putting the new kernel on SuSE 8.1.
Two questions:
1) How do yo know what device to mount? lsusb returns:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0c0b:b001 Acomdata <--- this is the device
and cat /proc/usb/devices has this entry:
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0c0b ProdID=b001 Rev=11.10
S: Manufacturer=DMI
S: Product=USB 2.0 Storage Adaptor
S: SerialNumber=0B02011C053CC4AC
so my question is, what goes here:
mount /dev/<WHAT GOES HERE?> /mnt -t ext3
2) Okay, so how does one place the ext3 file system on the device to
begin with?????
it's sorta difficult when I'm not sure what the system is calling the
device.
Okay, the questions may be out of order, but I think you get the idea.
Thanks in advanced!
-- Ryan
P.S. lsusb was locking up under stock SuSE 8.1!!!! anybody else have
the same problem???
--
+-------------------------------+
| [EMAIL PROTECTED] |
| http://www.pnwtripreports.com |
+-------------------------------+
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
