Hi All,
I have a USB UHCI controller on my BIOS but the ports are not there on the
motherboard....SO i got a USB PCI card
with OHCI....I ahve a HP-3325 printer and want to connect it but whenevr i connect it
there is this following error....
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: hub driver claimed interface c23af564
usb.c: kusbd: /sbin/hotplug add 1
usb.c: USB device not accepting new address=2 (error=-110)
So, can anybody suggest me what might be the problem....I am in a bad fix....
The output of /var/log/dmesg is:
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc497f000, IRQ 5
usb-ohci.c: usb-01:0a.0, CMD Technology Inc USB0673
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c23af564, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: c497f000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: individual port over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 510ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: hub driver claimed interface c23af564
usb.c: kusbd: /sbin/hotplug add 1
usb.c: USB device not accepting new address=2 (error=-110)
usb-uhci.c: $Revision: 1.275 $ time 14:29:26 Feb 25 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 9 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF c23af80c, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: d000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c23af80c
usb.c: kusbd: /sbin/hotplug add 1
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: port 2, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: port 2 enable change, status 101
The output of /proc/interuppts is:
CPU0
0: 1189407 XT-PIC timer
1: 15744 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 2 XT-PIC usb-ohci
9: 0 XT-PIC usb-uhci
10: 16461 XT-PIC Intel ICH 82801AA
12: 542236 XT-PIC PS/2 Mouse
14: 170428 XT-PIC ide0
15: 6 XT-PIC ide1
NMI: 0
ERR: 0
I understand that this is an IRQ routing problem but I have no knowledge in this feild
so pls somebody provide some sight into this....
Regards,
Animesh
__________________________________
NeoLinux SOlutions, Ranchi, India.
http://neolinuxsolutions.com,
+91-651-250 5568
+91-98351 21607.
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
