Hi
I am running a GNU/Debian system on a openbrick hardware and bought a D-Link
USB-Ethernet adapter for my connection to the internet. I often see errors
like this im my /var/log/syslog
Mar 2 10:31:08 ob kernel: pegasus.c: intr status -84
Afterwards I am unable to use the corresponding ethernet link
(my outbound connection to the ethernet via cable)
cat /proc/version
Linux version 2.4.20-386 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Mon Jan 13 20:53:07 EST 2003
sor : 0
vendor_id : CyrixInstead
cpu family : 5
model : 9
model name : Geode(TM) Integrated Processor by National Semi
stepping : 2
cpu MHz : 299.918
cache size : 16 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu tsc msr cx8 cmov mmx cxmmx
bogomips : 598.01
cat /proc/modules
acm 5024 0 (unused)
appletalk 19172 13 (autoclean)
parport_pc 20840 1 (autoclean)
lp 6912 0 (autoclean)
parport 22720 1 (autoclean) [parport_pc lp]
pcmcia_core 35232 0
ipt_MASQUERADE 1240 1 (autoclean)
ipt_LOG 3224 7 (autoclean)
iptable_mangle 2192 0 (autoclean) (unused)
iptable_filter 1668 1 (autoclean)
iptable_nat 14456 1 [ipt_MASQUERADE]
ip_tables 10616 7 [ipt_MASQUERADE ipt_LOG iptable_mangle
iptable_filter iptable_nat]
ip_conntrack 16704 1 [ipt_MASQUERADE iptable_nat]
pegasus 13532 1
apm 9096 0 (unused)
keybdev 1664 0 (unused)
usbkbd 2844 0 (unused)
input 3296 0 [keybdev usbkbd]
usb-ohci 17384 0 (unused)
usbcore 55424 1 [acm pegasus usbkbd usb-ohci]
8139too 16072 1
mii 2208 0 [8139too]
af_packet 11976 3
rtc 6140 0 (autoclean)
ext3 56864 7 (autoclean)
jbd 36104 7 (autoclean) [ext3]
ide-disk 9344 8 (autoclean)
ide-probe-mod 8496 0 (autoclean)
ide-mod 149960 8 (autoclean) [ide-disk ide-probe-mod]
unix 135
01f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(set)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
e000-e0ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
e000-e0ff : 8139too
f000-f00f : Cyrix Corporation 5530 IDE [Kahlua]
f000-f007 : ide0
f008-f00f : ide1
00-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-07ffffff : System RAM
00100000-001e6236 : Kernel code
001e6237-002485c3 : Kernel data
40011000-4001107f : Cyrix Corporation 5530 Audio [Kahlua]
40012000-400120ff : Cyrix Corporation 5530 SMI [Kahlua]
d0000000-d0ffffff : Intergraphics Systems CyberPro 5000
d2000000-d20000ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
d2000000-d20000ff : 8139too
d2004000-d2004fff : Compaq Computer Corporation ZFMicro Chipset USB
d2004000-d2004fff : usb-ohci
ffff0000-ffffffff : reserved
scripts/ver_linux gives me:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux ob.ngiger.dyndns.org 2.4.20-386 #1 Mon Jan 13 20:53:07 EST 2003 i586
unkno wn unknown GNU/Linux
Gnu C command
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.21
e2fsprogs 1.27
pcmcia-cs 3.1.33
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 4.5.4
Modules Loaded acm appletalk parport_pc lp parport pcmcia_core
ipt_MASQU ERADE ipt_LOG iptable_mangle iptable_filter iptable_nat ip_tables
ip_conntrack p egasus apm keybdev usbkbd input usb-ohci usbcore 8139too mii
af_packet rtc ext3 jbd ide-disk ide-probe-mod ide-mod unix
The USB-Ethernet adapter shows up like this in my /var/log/messages
Mar 2 10:57:10 ob kernel: usb.c: USB disconnect on device 00:13.0-2 address 2
Mar 2 10:57:10 ob /etc/hotplug/net.agent: invoke ifdown eth1
Mar 2 10:57:12 ob kernel: hub.c: new USB device 00:13.0-2, assigned address 3
Mar 2 10:57:12 ob kernel: pegasus.c: eth1: USB 10/100 Fast Ethernet
Mar 2 10:57:12 ob kernel: pegasus.c: setup Pegasus II specific registers
Mar 2 10:57:12 ob /etc/hotplug/net.agent: invoke ifup eth1
Mar 2 10:57:20 ob /etc/hotplug/usb.agent: Setup pegasus for USB product
7b8/4102/101
uname -a gives the following info
Linux ob.ngiger.dyndns.org 2.4.20-386 #1 Mon Jan 13 20:53:07 EST 2003 i586
unknown unknown GNU/Linux
ifconfig eth1 gives me the following answer
eth1 Link encap:Ethernet HWaddr 00:50:BA:80:09:3D
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:164463 errors:0 dropped:0 overruns:0 frame:0
TX packets:27258 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
RX bytes:22843577 (21.7 MiB) TX bytes:3428193 (3.2 MiB)
Any help would be greatly appreciated. I am willing to help debug this problem
but I have no idea how to help (except that I tried to include all needed
information as described in
http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html)
Best regards
--
Niklaus Giger
Wieshoschet 6
CH-8753 Mollis
Tel. ++41 55 612 20 54 (privat)
Tel. ++41 55 618 64 68 (Geschäft)
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
