So now usb-storage is bound to this device. You should see infomration in your kernel logs about it activating scsi devices? Do you not? What is in /proc/scsi/scsi? You do have scsi support in your kernel?
On Tue, 4 Mar 2003, Michael Thies wrote: > Hi you, > > at first: thanks for the two answers I got by now. > And I have to say: I'm a little confused, but read... > > On Tue, Mar 04, 2003 at 01:25:42PM -0800, Stephen J. Gowdy wrote: > > What's in /proc/bus/usb/devices? Looks strange that there is no product or > > vendor id. > > it says: > > # cat /proc/bus/usb/devices > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=bce0 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0dda ProdID=0001 Rev= 2.5b > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms > > and strangely (the only thing changed since last eMail is, the notebook > was suspended to ram and resumed) I got plugging in the cable: > > Mar 4 22:37:13 independence /etc/hotplug/usb.agent: ... no modules for USB product > dda/1/25b > > usbview says "IC1100 V2.5B", and tries to mount /dev/sdb1 > > mount: No medium found > > To answer Brians question in that eMail: > I have compiled multi LUN support in that kernel using: > CONFIG_SCSI_MULTI_LUN=y > > I can't try a mount on sda, because I don't own a CF or MD .-( > > I'm really confused... > > > > Mar 4 20:12:55 independence kernel: Manufacturer: ICSI > > > Mar 4 20:12:55 independence kernel: Product: IC1100 V2.5B > > > Mar 4 20:12:55 independence kernel: SerialNumber: 000123454229 > > > [...] > > > Mar 4 20:12:58 independence /etc/hotplug/usb.agent: ... no modules for USB > > > product 0/0/0 > > and now getting: > Mar 4 22:37:13 independence /etc/hotplug/usb.agent: ... no modules for USB product > dda/1/25b > > Where can I get a module for the USB product dda/1/25b (which may be my > card reader)? > > > TiA > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
