HI

Today I connected my usb printer again and strangely, it registered
correctly. Then I turned it
off and started it again, and it didn't register again..... sigh. I just
don't know
what the parameter is that causes it to register or not. (see also previous
posts). Luckily, I made some diagnostic output when the printer was 
working, which I'll include below. Also I'll include the same output for 
the case in which the printer was not registering. Maybe someone can see 
from this what the problem is.

Jos. 


***************************************
debug output when printer did register:
(see below for output when printer is not registered)

ps uxa
USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0   448   64 ?        S    09:33   0:04 init [5]
root         2  0.0  0.0     0    0 ?        SW   09:33   0:00 [keventd]
root         3  0.0  0.0     0    0 ?        SW   09:33   0:00 [kapmd]
root         4  0.0  0.0     0    0 ?        SWN  09:33   0:00
[ksoftirqd_CPU0]
root         5  0.0  0.0     0    0 ?        SW   09:33   0:02 [kswapd]
root         6  0.0  0.0     0    0 ?        SW   09:33   0:00 [bdflush]
root         7  0.0  0.0     0    0 ?        SW   09:33   0:00 [kupdated]
root         8  0.0  0.0     0    0 ?        SW   09:33   0:00 [kinoded]
root         9  0.0  0.0     0    0 ?        SW<  09:33   0:00 [mdrecoveryd]
root        12  0.0  0.0     0    0 ?        SW   09:33   0:00 [kreiserfsd]
root       348  0.0  0.1  1408  220 ?        S    09:33   0:00 /sbin/syslogd
root       351  0.0  0.1  2084  172 ?        S    09:33   0:00 /sbin/klogd
-c 1
root       387  0.0  0.0     0    0 ?        SW   09:33   0:00 [khubd]
root       561  0.0  0.0  1496    4 ?        S    09:33   0:02 /sbin/cardmgr
-k -m /lib/modules/2.4.18-4GB/ -n pcmcia
bin        574  0.0  0.0  1344    4 ?        S    09:33   0:00 /sbin/portmap
root       607  0.0  0.0  2652    4 ?        S    09:33   0:00
/usr/sbin/sshd
root       646  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /de$
root       672  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-netifup -d /var/run/vmnet-netifup-vmnet8.$
root       676  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-netifup -d /var/run/vmnet-netifup-vmnet1.$
root       716  0.0  0.0  1508   80 ?        S    09:33   0:00
/usr/bin/vmnet-natd -d /var/run/vmnet-natd-8.pid -m /var$
root       789  0.0  0.0  1536    4 ?        S    09:33   0:00
/usr/bin/vmnet-dhcpd -cf /etc/vmware/vmnet8/dhcpd/dhcpd.$
root       832  0.0  0.0  1536   60 ?        S    09:33   0:00
/usr/bin/vmnet-dhcpd -cf /etc/vmware/vmnet1/dhcpd/dhcpd.$
root       928  0.0  0.2  1952  328 ?        S    09:33   0:00
/usr/bin/vmware-nmbd -D -l /dev/null -s /etc/vmware/vmne$
root       979  0.0  0.0  3492    4 ?        S    09:33   0:00
/usr/bin/vmware-smbd -D -l /dev/null -s /etc/vmware/vmne$
at        1027  0.0  0.0  1456    4 ?        S    09:33   0:00 /usr/sbin/atd
lp        1063  0.0  0.2  1980  372 ?        S    09:33   0:00 lpd Waiting
mail      1141  0.0  0.2  5368  316 ?        S    09:34   0:00 sendmail:
Queue [EMAIL PROTECTED]:30:00 for /var/spool/clientmqu$
root      1208  0.0  0.8  5588 1036 ?        S    09:34   0:00 sendmail:
accepting connections                         $
root      1224  0.0  0.0  1476  116 ?        S    09:34   0:00
/usr/sbin/cron
root      1240  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1241  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1242  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1243  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1244  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1245  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      1246  0.0  0.2 11804  360 ?        S    09:34   0:00
/usr/sbin/nscd
root      2386  0.0  0.0  1324    4 ?        S    09:34   0:00
/opt/win4lin/bin/vnetd
root      2421  0.0  0.0  2148    4 tty1     S    09:34   0:00 login -- root
root      2422  0.0  0.0  1308    4 tty2     S    09:34   0:00
/sbin/mingetty tty2
root      2423  0.0  0.0  1308    4 tty3     S    09:34   0:00
/sbin/mingetty tty3
root      2424  0.0  0.0  1308    4 tty4     S    09:34   0:00
/sbin/mingetty tty4
root      2425  0.0  0.0  1308    4 tty5     S    09:34   0:00
/sbin/mingetty tty5
root      2426  0.0  0.0  1308    4 tty6     S    09:34   0:00
/sbin/mingetty tty6
root      2427  0.0  0.0  2784    4 tty1     S    09:34   0:00 -bash
root      2444  0.0  0.0  2484    4 tty1     S    09:34   0:00 /bin/sh
/usr/X11R6/bin/startx
root      2445  0.0  0.0  1488    4 tty1     S    09:34   0:00 tee
/root/.X.err
root      2457  0.0  0.0  2164    4 tty1     S    09:34   0:00 xinit
/root/.xinitrc -- /usr/X11R6/lib/X11/xinit/xserver$
root      2458  0.6  3.6 32368 4632 ?        S<   09:34   4:01 X :0 -auth
/root/.Xauthority
root      2468  0.0  0.8  4536 1016 tty1     S    09:34   0:06 fvwm2 -cmd
piperead "cdemu --print"
root      2491  0.0  0.3  3704  504 tty1     S    09:34   0:00
/usr/local/libexec/fvwm/2.5.6/FvwmPager 8 5 none 0 8 0 3
root      2494  0.0  0.0  1312   64 tty1     S    09:35   0:00
/usr/local/libexec/fvwm/2.5.6/FvwmCommandS 9 4 none 0 0
root      2495  0.0  2.3 19444 2992 tty1     S    09:35   0:04 /usr/bin/perl
-w /usr/local/bin/cdemu 11 4 none 0 0
root      3858  0.0  0.3  4732  480 tty1     S    16:22   0:00 xterm
root      3860  0.0  0.0  2824    4 pts/1    S    16:22   0:00 bash
root      5047  2.5 37.7 54872 47740 pts/1   S    19:07   1:49 gimp
IMG_0132.JPG
root      5048  0.0  0.6  6924  872 pts/1    S    19:07   0:00
/usr/lib/gimp/1.2/plug-ins/script-fu -gimp 13 12 -run 0
root      5066  0.0  0.2  3648  368 tty1     S    19:08   0:00 xcalc
root      5075  0.0  1.0  4800 1324 tty1     S    19:08   0:00 xterm
root      5077  0.0  0.7  2824  936 pts/0    S    19:08   0:00 bash
root      5518  0.0  1.7  6196 2164 ?        S    20:14   0:00
/opt/gnome/bin/medusa-idled
lp        5554  1.4  0.6  1984  868 ?        S    20:16   0:01 lpd (Server)
'lp'
lp        5563  0.0  0.7  2000  928 ?        S    20:17   0:00 lpd (Worker -
Print) 'lp'
lp        5564  0.0  0.9  2320 1156 ?        S    20:17   0:00 /bin/bash
/usr/lib/lpdfilter/bin/if [EMAIL PROTECTED] -CA$
lp        5577  0.0  0.9  2320 1156 ?        S    20:17   0:00 /bin/bash
/usr/lib/lpdfilter/bin/if [EMAIL PROTECTED] -CA$
lp        5578  0.0  0.3  1312  384 ?        S    20:17   0:00 cat -
lp        5579  0.1  0.3  1312  384 ?        S    20:17   0:00 cat
root      5599  2.3  2.1  3900 2700 pts/0    S    20:18   0:00 vim
printerworks
root      5600  0.0  1.2  2548 1564 pts/0    R    20:18   0:00 ps uxa



lsmod
Module                  Size  Used by    Tainted: PF
printer                 5440   0
ide-cs                  3264   1
snd-pcm-oss            45152   0  (autoclean)
snd-mixer-oss          11136   0  (autoclean)
ppp_deflate            39456   0  (autoclean)
bsd_comp                4032   0  (autoclean)
ppp_async               6080   0  (autoclean)
ppp_generic            14984   0  (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc                    4432   0  (autoclean) [ppp_generic]
lt_serial              20448   0  (autoclean)
lt_modem              479739   0  (autoclean) [lt_serial]
Mvnetd                  8676   1  (unused)
Mvnet                  51968   0  [Mvnetd]
Mvnetint                 216   0  (unused)
Mvw                     4172   0  (unused)
Mvmouse                  704   0  (unused)
Mvkbd                    824   0  (unused)
Mvgic                   3160   0  (unused)
Mvdsp                    904   0  (unused)
Mserial                 5724   0  (unused)
Mmpip                   6796   0  (unused)
Mmerge                128636   0  [Mvnetd Mvnet Mvw Mvmouse Mvkbd Mvgic
Mvdsp Mserial Mmpip]
mki-adapter            19792   0  [Mvnetd Mvnet Mvnetint Mvw Mvmouse Mvkbd
Mvgic Mvdsp Mserial Mmpip Mmerge]
snd-maestro3           13732   0
snd-pcm                58528   0  [snd-pcm-oss snd-maestro3]
snd-timer              11456   0  [snd-pcm]
snd-ac97-codec         24196   0  [snd-maestro3]
snd                    31720   0  [snd-pcm-oss snd-mixer-oss snd-maestro3
snd-pcm snd-timer snd-ac97-codec]
soundcore               3268   3  [snd]
vmnet                  17696   6
vmppuser                6432   0  (unused)
parport_pc             25448   0
parport                21856   0  [vmppuser parport_pc]
vmmon                  18196   0  (unused)
ipv6                  123424  -1  (autoclean)
ds                      6368   2  [ide-cs]
yenta_socket            8384   2
pcmcia_core            37984   0  [ide-cs ds yenta_socket]
isa-pnp                27816   0  (unused)
mousedev                3872   1
keybdev                 1664   0  (unused)
hid                    17824   0  (unused)
joydev                  5728   0  (unused)
evdev                   3904   0  (unused)
input                   3072   0  [mousedev keybdev hid joydev evdev]
usb-uhci               20996   0  (unused)
usbcore                55136   1  [printer hid usb-uhci]
nls_iso8859-1           2880   1  (autoclean)
ntfs                   49184   1  (autoclean)
lvm-mod                58016   0  (autoclean)
reiserfs              158816   1

cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=247/900 us (27%), #Int=  3, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub   
S:  SerialNumber=dce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c504 Rev=13.10
S:  Manufacturer=Logitech
S:  Product=USB Receiver
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0451 ProdID=2036 Rev= 1.01
S:  Product=General Purpose USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=04b8 ProdID=0005 Rev= 1.00
S:  Manufacturer=EPSON
S:  Product=USB Printer
S:  SerialNumber=RR0270208241326370
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
T:  Bus=01 Lev=02 Prnt=04 Port=01 Cnt=02 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=04b8 ProdID=0602 Rev= 1.10
S:  Manufacturer=EPSON
S:  Product=SP 915 Storage
S:  SerialNumber=RR02728ODQ71
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms

cat /var/log/messages
Mar 10 19:39:52 linux kernel: keyboard.c: can't emulate rawmode for keycode
274
Mar 10 19:39:55 linux kernel: keyboard.c: can't emulate rawmode for keycode
272
Mar 10 19:40:05 linux last message repeated 3 times
Mar 10 19:40:59 linux kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Mar 10 19:40:59 linux cardmgr[561]: socket 1: ATA/IDE Fixed Disk
Mar 10 19:40:59 linux cardmgr[561]: module
/lib/modules/2.4.18-4GB//pcmcia/ide-cs.o not available
Mar 10 19:40:59 linux cardmgr[561]: executing: 'modprobe -v ide-cs'
Mar 10 19:41:00 linux cardmgr[561]: + /sbin/insmod
/lib/modules/2.4.18-4GB/kernel/drivers/ide/ide-cs.o
Mar 10 19:41:00 linux cardmgr[561]: + Using
/lib/modules/2.4.18-4GB/kernel/drivers/ide/ide-cs.o
Mar 10 19:41:00 linux cardmgr[561]: + Symbol version prefix ''
Mar 10 19:41:02 linux kernel: hdc: Hitachi XXM2.2.0, ATA DISK drive
Mar 10 19:41:02 linux kernel: ide1 at 0x100-0x107,0x10e on irq 3
Mar 10 19:41:02 linux kernel: ide-floppy driver 0.99
Mar 10 19:41:02 linux kernel: hdc: failed write cache flush, disabling
ordered write support
Mar 10 19:41:02 linux kernel: hdc: 15744 sectors (8 MB) w/1KiB Cache,
CHS=246/2/32
Mar 10 19:41:02 linux kernel:  hdc: hdc1
Mar 10 19:41:02 linux kernel: ide_cs: hdc: Vcc = 3.3, Vpp = 0.0  
Mar 10 19:41:02 linux cardmgr[561]: executing: './ide start hdc'
Mar 10 19:41:11 linux kernel: hub.c: USB new device connect on bus1/2,
assigned device number 4
Mar 10 19:41:11 linux kernel: hub.c: USB hub found
Mar 10 19:41:11 linux kernel: hub.c: 2 ports detected
Mar 10 19:41:12 linux kernel: hub.c: USB new device connect on bus1/2/1,
assigned device number 5
Mar 10 19:41:12 linux kernel: usb.c: USB device 5 (vend/prod 0x4b8/0x5) is
not claimed by any active driver.
Mar 10 19:41:12 linux kernel: usb.c: registered new driver usblp
Mar 10 19:41:12 linux kernel: printer.c: usblp0: USB Bidirectional printer
dev 5 if 0 alt 0
Mar 10 19:41:12 linux kernel: printer.c: v0.8:USB Printer Device Class
driver
Mar 10 19:41:12 linux insmod: Using
/lib/modules/2.4.18-4GB/kernel/drivers/usb/printer.o
Mar 10 19:41:12 linux insmod: Symbol version prefix ''
Mar 10 19:41:13 linux kernel: hub.c: USB new device connect on bus1/2/2,
assigned device number 6
Mar 10 19:41:13 linux kernel: usb.c: USB device 6 (vend/prod 0x4b8/0x602) is
not claimed by any active driver.
Mar 10 19:41:13 linux /etc/hotplug/usb.agent[5276]: ... no modules for USB
product 4b8/602/110
Mar 10 19:41:19 linux kernel: keyboard.c: can't emulate rawmode for keycode
272
Mar 10 19:41:50 linux last message repeated 4 times
Mar 10 19:41:57 linux last message repeated 7 times
Mar 10 19:42:00 linux kernel: keyboard.c: can't emulate rawmode for keycode
273
Mar 10 19:42:00 linux kernel: keyboard.c: can't emulate rawmode for keycode
273


******************************
******************************
debug output when printer didn't register:


linux:~ # ps uxa
USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
root         1  0.0  0.0   448   64 ?        S    09:33   0:04 init [5]
root         2  0.0  0.0     0    0 ?        SW   09:33   0:00 [keventd]
root         3  0.0  0.0     0    0 ?        SW   09:33   0:00 [kapmd]
root         4  0.0  0.0     0    0 ?        SWN  09:33   0:00
[ksoftirqd_CPU0]
root         5  0.0  0.0     0    0 ?        SW   09:33   0:02 [kswapd]
root         6  0.0  0.0     0    0 ?        SW   09:33   0:00 [bdflush]
root         7  0.0  0.0     0    0 ?        SW   09:33   0:00 [kupdated]
root         8  0.0  0.0     0    0 ?        SW   09:33   0:00 [kinoded]
root         9  0.0  0.0     0    0 ?        SW<  09:33   0:00 [mdrecoveryd]
root        12  0.0  0.0     0    0 ?        SW   09:33   0:00 [kreiserfsd]
root       348  0.0  0.1  1408  220 ?        S    09:33   0:00 /sbin/syslogd
root       351  0.0  0.1  2084  172 ?        S    09:33   0:00 /sbin/klogd
-c 1
root       387  0.0  0.0     0    0 ?        SW   09:33   0:00 [khubd]
root       561  0.0  0.2  1496  284 ?        S    09:33   0:04 /sbin/cardmgr
-k -m /lib/modules/2.4.18-4GB/ -n
pcmcia
bin        574  0.0  0.0  1344    4 ?        S    09:33   0:00 /sbin/portmap
root       607  0.0  0.0  2652    4 ?        S    09:33   0:00
/usr/sbin/sshd
root       646  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-bridge -d
/var/run/vmnet-bridge-0.pid /dev
root       672  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-netifup -d
/var/run/vmnet-netifup-vmnet8.p
root       676  0.0  0.0  1300    4 ?        S    09:33   0:00
/usr/bin/vmnet-netifup -d
/var/run/vmnet-netifup-vmnet1.p
root       716  0.0  0.0  1508    4 ?        S    09:33   0:00
/usr/bin/vmnet-natd -d /var/run/vmnet-natd-8.pid -m
/var/
root       789  0.0  0.0  1536    4 ?        S    09:33   0:00
/usr/bin/vmnet-dhcpd -cf
/etc/vmware/vmnet8/dhcpd/dhcpd.c
root       832  0.0  0.0  1536   60 ?        S    09:33   0:00
/usr/bin/vmnet-dhcpd -cf
/etc/vmware/vmnet1/dhcpd/dhcpd.c
root       928  0.0  0.3  1952  388 ?        S    09:33   0:00
/usr/bin/vmware-nmbd -D -l /dev/null -s
/etc/vmware/vmnet
root       979  0.0  0.0  3492    4 ?        S    09:33   0:00
/usr/bin/vmware-smbd -D -l /dev/null -s
/etc/vmware/vmnet
at        1027  0.0  0.0  1456  100 ?        S    09:33   0:00 /usr/sbin/atd
lp        1063  0.0  0.0  1980    4 ?        S    09:33   0:00 lpd Waiting
mail      1141  0.0  0.2  5368  316 ?        S    09:34   0:00 sendmail:
Queue [EMAIL PROTECTED]:30:00 for
/var/spool/clientmque
root      1208  0.0  0.2  5588  376 ?        S    09:34   0:00 sendmail:
accepting connections
root      1224  0.0  0.0  1476  116 ?        S    09:34   0:00
/usr/sbin/cron
root      1240  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1241  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1242  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1243  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1244  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1245  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      1246  0.0  0.2 11804  364 ?        S    09:34   0:00
/usr/sbin/nscd
root      2386  0.0  0.0  1324    4 ?        S    09:34   0:00
/opt/win4lin/bin/vnetd
root      2421  0.0  0.0  2148    4 tty1     S    09:34   0:00 login -- root
root      2422  0.0  0.0  1308    4 tty2     S    09:34   0:00
/sbin/mingetty tty2
root      2423  0.0  0.0  1308    4 tty3     S    09:34   0:00
/sbin/mingetty tty3
root      2424  0.0  0.0  1308    4 tty4     S    09:34   0:00
/sbin/mingetty tty4
root      2425  0.0  0.0  1308    4 tty5     S    09:34   0:00
/sbin/mingetty tty5
root      2426  0.0  0.0  1308    4 tty6     S    09:34   0:00
/sbin/mingetty tty6
root      2427  0.0  0.0  2784    4 tty1     S    09:34   0:00 -bash
root      2444  0.0  0.0  2484    4 tty1     S    09:34   0:00 /bin/sh
/usr/X11R6/bin/startx
root      2445  0.0  0.0  1488   60 tty1     S    09:34   0:00 tee
/root/.X.err
root      2457  0.0  0.0  2164    4 tty1     S    09:34   0:00 xinit
/root/.xinitrc --
/usr/X11R6/lib/X11/xinit/xserverr
root      2458  0.6  8.6 32808 10936 ?       R<   09:34   4:45 X :0 -auth
/root/.Xauthority
root      2468  0.0  1.1  4536 1472 tty1     S    09:34   0:06 fvwm2 -cmd
piperead "cdemu --print"
root      2491  0.0  0.4  3704  512 tty1     S    09:34   0:01
/usr/local/libexec/fvwm/2.5.6/FvwmPager 8 5 none 0
8 0 3
root      2494  0.0  0.0  1312   64 tty1     S    09:35   0:00
/usr/local/libexec/fvwm/2.5.6/FvwmCommandS 9 4 none
0 0
root      5066  0.0  0.3  3648  384 tty1     S    19:08   0:00 xcalc
root      5075  0.0  0.8  4800 1116 tty1     S    19:08   0:00 xterm
root      5077  0.0  0.8  2824 1052 pts/0    S    19:08   0:00 bash
root      5518  0.0  0.2  6200  300 ?        S    20:14   0:00
/opt/gnome/bin/medusa-idled
root      6496  0.0  0.8  3076 1028 pts/0    S    22:06   0:00 wvdial
tuenijmegen
root      6497  0.0  0.6  1852  876 ttyLT0   S    22:06   0:00
/usr/sbin/pppd 57600 modem crtscts defaultroute
usehostna
root      6602  0.0  0.9  2512 1184 tty1     S    22:07   0:00 /bin/sh
/usr/local/mozilla/run-mozilla.sh
/usr/local/mozi
root      6615  7.1 30.0 54328 37972 tty1    S    22:07   1:49
/usr/local/mozilla/mozilla-bin
root      6616  0.0 30.0 54328 37972 tty1    S    22:07   0:00
/usr/local/mozilla/mozilla-bin
root      6617  0.0 30.0 54328 37972 tty1    S    22:07   0:00
/usr/local/mozilla/mozilla-bin
root      6618  0.0 30.0 54328 37972 tty1    S    22:07   0:00
/usr/local/mozilla/mozilla-bin
root      6620  0.0 30.0 54328 37972 tty1    S    22:07   0:00
/usr/local/mozilla/mozilla-bin
root      6642  0.0  7.4 12836 9376 tty1     S    22:09   0:00 /usr/bin/perl
-w /usr/local/bin/cdemu 21 9 none 0 0
root      6692  0.0 30.0 54328 37972 tty1    S    22:23   0:00
/usr/local/mozilla/mozilla-bin
root      6766  0.1  2.1  4960 2692 tty1     S    22:27   0:00 xterm
root      6768  0.0  1.3  2820 1644 pts/1    S    22:27   0:00 bash
root      6820  0.0  1.2  2560 1576 pts/1    R    22:33   0:00 ps uxa

linux:~ # lsmod
Module                  Size  Used by    Tainted: PF
nls_cp437               4384   0  (autoclean) 
vfat                    9244   0  (autoclean)
fat                    28984   0  (autoclean) [vfat]
printer                 5440   0
snd-pcm-oss            45152   0  (autoclean)
snd-mixer-oss          11136   0  (autoclean)
ppp_deflate            39456   0  (autoclean)
bsd_comp                4032   0  (autoclean)
ppp_async               6080   1  (autoclean)
ppp_generic            14984   3  (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc                    4432   1  (autoclean) [ppp_generic]
lt_serial              20448   3  (autoclean)
lt_modem              479739   0  (autoclean) [lt_serial]
Mvnetd                  8676   1  (unused)
Mvnet                  51968   0  [Mvnetd]
Mvnetint                 216   0  (unused)   
Mvw                     4172   0  (unused)
Mvmouse                  704   0  (unused)   
Mvkbd                    824   0  (unused)
Mvgic                   3160   0  (unused)
Mvdsp                    904   0  (unused)
Mserial                 5724   0  (unused)
Mmpip                   6796   0  (unused)
Mmerge                128636   0  [Mvnetd Mvnet Mvw Mvmouse Mvkbd Mvgic
Mvdsp Mserial Mmpip]
mki-adapter            19792   0  [Mvnetd Mvnet Mvnetint Mvw Mvmouse Mvkbd
Mvgic Mvdsp Mserial Mmpip Mmerge]
snd-maestro3           13732   0
snd-pcm                58528   0  [snd-pcm-oss snd-maestro3]
snd-timer              11456   0  [snd-pcm]
snd-ac97-codec         24196   0  [snd-maestro3]
snd                    31720   0  [snd-pcm-oss snd-mixer-oss snd-maestro3
snd-pcm snd-timer snd-ac97-codec]
soundcore               3268   3  [snd]
vmnet                  17696   6
vmppuser                6432   0  (unused)
parport_pc             25448   0
parport                21856   0  [vmppuser parport_pc]
vmmon                  18196   0  (unused)
ipv6                  123424  -1  (autoclean)
ds                      6368   2
yenta_socket            8384   2
pcmcia_core            37984   0  [ds yenta_socket]
isa-pnp                27816   0  (unused)
mousedev                3872   1
keybdev                 1664   0  (unused)
hid                    17824   0  (unused)
joydev                  5728   0  (unused)
evdev                   3904   0  (unused)
input                   3072   0  [mousedev keybdev hid joydev evdev]
usb-uhci               20996   0  (unused)
usbcore                55136   1  [printer hid usb-uhci]
nls_iso8859-1           2880   1  (autoclean)
ntfs                   49184   1  (autoclean)
lvm-mod                58016   0  (autoclean)
reiserfs              158816   1


linux:~ # cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=247/900 us (27%), #Int=  3, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub   
S:  SerialNumber=dce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c504 Rev=13.10
S:  Manufacturer=Logitech
S:  Product=USB Receiver
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl= 10ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 16 Spd=12  MxCh= 2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0451 ProdID=2036 Rev= 1.01
S:  Product=General Purpose USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
T:  Bus=01 Lev=02 Prnt=16 Port=01 Cnt=01 Dev#= 17 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=04b8 ProdID=0602 Rev= 1.10
S:  Manufacturer=EPSON
S:  Product=SP 915 Storage
S:  SerialNumber=RR02728ODQ71
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms



/var/log/messages
Mar 10 22:27:13 linux kernel: hub.c: USB new device connect on bus1/2,
assigned device number 16
Mar 10 22:27:13 linux kernel: hub.c: USB hub found
Mar 10 22:27:13 linux kernel: hub.c: 2 ports detected
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: usb_hub_port_status (16) failed (err =
-6)
Mar 10 22:27:14 linux kernel: hub.c: connect-debounce failed, port 1
disabled
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001000, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: cannot disable port 1 of hub 16 (err =
-6)
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: usb_hub_port_status (16) failed (err =
-6)
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: get_hub_status failed
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: usb_hub_port_status (16) failed (err =
-6)
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: usb_hub_port_status (16) failed (err =
-6)
Mar 10 22:27:14 linux kernel: usb-uhci.c: ENXIO 80001080, flags 0, urb
c4b688c0, burb c4b68540
Mar 10 22:27:14 linux kernel: hub.c: get_hub_status failed
Mar 10 22:27:14 linux kernel: hub.c: USB new device connect on bus1/2/2,
assigned device number 17
Mar 10 22:27:14 linux kernel: usb.c: USB device 17 (vend/prod 0x4b8/0x602)
is not claimed by any active driver.
Mar 10 22:27:15 linux /etc/hotplug/usb.agent[6727]: ... no modules for USB
product 4b8/602/110





-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to