Further information:
Whilst browsing rc.d/rc0.d, I noticed that the entry for the hotplug is
highlighted in red (actually a blinking red background). Blinking red is
not good. What do I need to do to correct? Thanks for the assistance.
TKBui...
--- Begin Message ---
Sorry... Message with attachement.
--- Begin Message ---
Attached is the /var/log/dmesg
Further review of the linux-usb.org website, including the FAQ, has not
been fruitful. :-)
Thanks for the assistance.
TKBui...
--- Begin Message ---
----- Original Message -----
From: TK Bui <[EMAIL PROTECTED]>
Date: 15 Mar 2003 18:47:05 -0800
To: [EMAIL PROTECTED]
Subject: [Linux-usb-users] No /proc/bus/usb
> Hello...
> I have been reading information in regards to the not having a
> /proc/bus/usb problem. I had my MS-Trackball Explorer working... then
> this morning I fired up Netscape... and DING... No USB devices. When I
Check out whether the usb modules( either usb-ohci, usb-uhci or ehci and usbcore and
the others) are loading correctly and if usbdevfs or hotplug is getting initialised
correctly.......
Also post the /var/log/dmesg for better understanding......
Cheers,
____________________________
Animesh Bansriyar,
NeoLinux Solutions,
Ranchi, India.
+91-651-2505568
+91-9835121607
http://neolinuxsolutions.com
--
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
--- End Message ---
--- End Message ---
Linux version 2.4.18-24.8.0 ([EMAIL PROTECTED]) (gcc version 3.2 20020903 (Red Hat
Linux 8.0 3.2-7)) #1 Fri Jan 31 06:51:30 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
BIOS-e820: 000000000ffd0000 - 000000000ffdf000 (ACPI data)
BIOS-e820: 000000000ffdf000 - 000000000ffe0000 (ACPI NVS)
BIOS-e820: 000000000ffe0000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
On node 0 totalpages: 65488
zone(0): 4096 pages.
zone(1): 61392 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 647.764 MHz processor.
Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Console: colour VGA+ 80x25
Calibrating delay loop... 1288.19 BogoMIPS
Memory: 252924k/261952k available (1315k kernel code, 6596k reserved, 990k data, 172k
init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 4096 (order: 3, 32768 bytes)
ramfs: mounted with options: <defaults>
ramfs: max_pages=31871 max_file_pages=0 max_inodes=0 max_dentries=31871
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 480 slots per queue, batch=120
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJSA-220, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03b26c4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03b26c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 23572080 sectors (12069 MB) w/1874KiB Cache, CHS=1559/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 127k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 172k freed
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal
Adding Swap: 521632k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SCSI subsystem driver Revision: 1.00
--- End Message ---
