Hello, I needed support for my Pentax Optio 430RS, so I added information I found on the web [ http://www.qbik.ch/usb/devices/showdev.php?id=1377 ] in unusual_devs.h, and recompiled this module. I replaced the usb-storage.o in /lib/modules/linux-[myversion]/kernel/drivers/usb/storage/ with my version. I can load this module with no problems. I can mount my card, and everything works.
Hotplug recognizes the device, and loads the correct module for it. However, nothing happens when I disconnect the camera. I get a message in /var/log/messages, but the device is still listed in /proc/scsi/scsi, and I can get information about it in /proc/scsi/usb-storage-0/1. The module also stays in memory. I can unload the module myself, but it gives a warning message (scsi : 1 host left). What can be wrong here? Any help is appreciated. Greetings, Jan Fabry This is the relevant part of /var/log/messages: [Connect] Mar 18 16:28:47 localhost kernel: hub.c: USB new device connect on bus4/1/4, assigned device number 23 Mar 18 16:28:47 localhost kernel: usb.c: USB device 23 (vend/prod 0xa17/0x4) is not claimed by any active driver. Mar 18 16:28:50 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product a17/4/1000 Mar 18 16:28:50 localhost kernel: Initializing USB Mass Storage driver... Mar 18 16:28:50 localhost kernel: usb.c: registered new driver usb-storage Mar 18 16:28:50 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Mar 18 16:28:50 localhost kernel: Vendor: Pentax Model: Optio 430RS Rev: 1000 Mar 18 16:28:50 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 18 16:28:50 localhost kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Mar 18 16:28:50 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 116 Mar 18 16:28:50 localhost kernel: SCSI device sda: 125184 512-byte hdwr sectors (64 MB) Mar 18 16:28:50 localhost kernel: sda: Write Protect is off Mar 18 16:28:50 localhost kernel: sda: sda1 Mar 18 16:28:50 localhost kernel: USB Mass Storage support registered. Mar 18 16:28:50 localhost /etc/hotplug/usb.agent: Module setup usb-storage for USB product a17/4/1000 [Disconnect] Mar 18 16:29:20 localhost kernel: usb.c: USB disconnect on device 23 [Unload module] Mar 18 16:40:19 localhost kernel: usb.c: deregistering driver usb-storage Mar 18 16:40:19 localhost kernel: scsi : 1 host left. ------------------------------------------------------- This SF.net email is sponsored by: Does your code think in ink? You could win a Tablet PC. Get a free Tablet PC hat just for playing. What are you waiting for? http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
