Results are the same w. 2.4.20 - 2.4.21-pre5 kernels and letest
hotplug.
The system has an harddisk attached as /dev/sda. Roemoving the
hard disk does not make a difference other than that the first
floppy is sda.
Log time and kernel name replaces by :
Please cc me.
Michael
-------
First insertion after USB subsys load, but not always repeatable
and sometimes with 8 drives
: hub.c: new USB device 00:14.0-1, assigned address 5
: Manufacturer: SMSC
: Product: USB FDC GOLD-1.11
: scsi2 : SCSI emulation for USB Mass Storage devices
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Vendor: SMSC Model: USB FDC Rev: 1.0;
: Type: Direct-Access ANSI SCSI
revision: 02
: Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun
0
: Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun
1
: Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun
2
: Attached scsi removable disk sde at scsi2, channel 0, id 0, lun
3
: SCSI device sdb: 2880 512-byte hdwr sectors (1 MB)
: sdb: Write Protect is off
: sdb:<7>usb-storage: queuecommand() called
: sdb1 sdb2 sdb3
: SCSI device sdc: 2880 512-byte hdwr sectors (1 MB)
: sdc: Write Protect is off
: sdc:<7>usb-storage: queuecommand() called
: sdc1 sdc2 sdc3
: SCSI device sdd: 2880 512-byte hdwr sectors (1 MB)
: sdd: Write Protect is off
: sdd:<7>usb-storage: queuecommand() called
: sdd1 sdd2 sdd3
: SCSI device sde: 2880 512-byte hdwr sectors (1 MB)
: sde: Write Protect is off
: sde:<7>usb-storage: queuecommand() called
: sde1 sde2 sde3
Mar 19 17:47:20 mhfl2 /sbin/hotplug: arguments (usb) env
(PWD=/etc/hotplug HOSTNAME=mhfl2 DEVICE=/proc/bus/usb/001/005
INTERFACE=8/4/0 ACTION=add DEBUG=kernel
MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb
TYPE=0/0/0 SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux-gnu HOME=/ TERM=dumb
PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=424/fdc/10b
_=/usr/bin/env)
Mar 19 17:47:20 mhfl2 /sbin/hotplug: invoke
/etc/hotplug/usb.agent ()
Mar 19 17:47:24 mhfl2 /etc/hotplug/usb.agent: Setup usb-storage
for USB product 424/fdc/10b
Mount
# mount /dev/sdb1 /mnt/flp3 /dev/sdb1: Input/output error
mount: you must specify the filesystem type
# mount /dev/sdb1 -t msdos -o fat=12 /mnt/flp3
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
or too many mounted file systems
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:11: sense key None
: I/O error: dev 08:11, sector 0
: FAT: unable to read boot sector
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:11: sense key None
: I/O error: dev 08:11, sector 0
: FAT: unable to read boot sector
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:12: sense key None
: I/O error: dev 08:12, sector 0
: FAT: unable to read boot sector
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:11: sense key None
: I/O error: dev 08:11, sector 0
: FAT: unable to read boot sector
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:11: sense key None
: I/O error: dev 08:11, sector 0
: FAT: unable to read boot sector
Remove
: usb.c: USB disconnect on device 00:14.0-1 address 8
Mar 19 18:04:40 mhfl2 /sbin/hotplug: arguments (usb) env
(PWD=/etc/hotplug HOSTNAME=mhfl2 DEVICE=/proc/bus/usb/001/008
INTERFACE=8/4/0 ACTION=remove DEBUG=kernel
MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb
TYPE=0/0/0 SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux-gnu HOME=/ TERM=dumb
PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=424/fdc/10b
_=/usr/bin/env)
Mar 19 18:04:40 mhfl2 /sbin/hotplug: invoke
/etc/hotplug/usb.agent ()
Reinsert
: hub.c: new USB device 00:14.0-1, assigned address 9
: Manufacturer: SMSC
: Product: USB FDC GOLD-1.11
Mar 19 18:04:47 mhfl2 /sbin/hotplug: arguments (usb) env
(PWD=/etc/hotplug HOSTNAME=mhfl2 DEVICE=/proc/bus/usb/001/009
INTERFACE=8/4/0 ACTION=add DEBUG=kernel
MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb
TYPE=0/0/0 SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux-gnu HOME=/ TERM=dumb
PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=424/fdc/10b
_=/usr/bin/env)
Mar 19 18:04:47 mhfl2 /sbin/hotplug: invoke
/etc/hotplug/usb.agent ()
Mar 19 18:04:51 mhfl2 /etc/hotplug/usb.agent: Setup usb-storage
for USB product 424/fdc/10b
mount
# mount /dev/sdb1 /mnt/flp3 /dev/sdb1: Input/output error
mount: you must specify the filesystem type
# mount /dev/sdb1 -t msdos -o fat=12 /mnt/flp3
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
or too many mounted file systems
: SCSI device sdb: 2880 512-byte hdwr sectors (1 MB)
: sdb: Write Protect is off
: sdb:<7>usb-storage: queuecommand() called
: sdb1 sdb2 sdb4
: SCSI disk error : host 2 channel 0 id 0 lun 0 return code =
8000002
: Current sd08:11: sense key None
: I/O error: dev 08:11, sector 0
: FAT: unable to read boot sector
-------------------------------------------------------
This SF.net email is sponsored by: Does your code think in ink?
You could win a Tablet PC. Get a free Tablet PC hat just for playing.
What are you waiting for?
http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
