I have the following dmesg output. hub.c: port 1, portstatus 103, change 0, 12 Mb/s hub.c: new USB device 00:1f.2-1, assigned address 5 uhci.c: uhci_result_control() failed with status 440000 [c450d0c0] link (0450d062) element (0450e1e0) 0: [c450e1e0] link (0450e210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=05cbbcc0) 1: [c450e210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
uhci.c: uhci_result_control() failed with status 440000 [c450d0c0] link (0450d062) element (0450e1e0) 0: [c450e1e0] link (0450e210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=05cbbcc0) 1: [c450e210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) usb.c: USB device not accepting new address=5 (error=-110) hub.c: port 2, portstatus 100, change 0, 12 Mb/s I run 2.4.20 kernel and 2.4.18 on the Ipaq. What is going on ? W ------------------------------------------------------- This SF.net email is sponsored by:Crypto Challenge is now open! Get cracking and register here for some mind boggling fun and the chance of winning an Apple iPod: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
