I've got the "egoman musicdesk md-100" which can be used as mp3-player &
memory stick. It doesn't need any driver under windows me/2000/xp so I think
it sould work under linux as well.
When it's pluged in, linux recognizes it as mass storage and creates /dev/sda1
but when I type `mount /dev/sda1 /mnt/usb` the session hangs.
What's my problem?
Regards, Daniel
While plugging in dmesg says:
uhci.c: bc00: wakeup_hc
uhci.c: root-hub INT complete: port1: 480 port2: 49b data: 4
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
hub.c: port 2, portstatus 101, change 2, 12 Mb/s
hub.c: port 2, portstatus 101, change 2, 12 Mb/s
uhci.c: root-hub INT complete: port1: 480 port2: 499 data: 4
hub.c: port 2, portstatus 101, change 2, 12 Mb/s
hub.c: port 2, portstatus 101, change 2, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:10.2-2, assigned address 2
usb.c: kmalloc IF 5efab600, numif 1
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 89
usb-storage: Array length appears to be: 91
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0x5f25d440 Out: 0x5f25d454 Int: 0x00000000 (Period
0)
usb-storage: New GUID 834120000000000000000000
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: MUSIC Model: DISK Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0/1)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0xa Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0xa R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0xb Trg 0 LUN 0 L 8 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0xb R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sda: 256001 512-byte hdwr sectors (131 MB)
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command MODE_SENSE (6 bytes)
usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0xc Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 12/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0xc R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
sda: Write Protect is off
/dev/scsi/host1/bus0/target0/lun0:<7>usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
usb-storage: Bulk command S 0x43425355 T 0xd Trg 0 LUN 0 L 4096 F 128 CL 10
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0xd R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface 5efab600
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
While trying to mount dmesg says: usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command START_STOP (6 bytes) usb-storage: 1b 00 00 00 01 00 ae 5e 00 03 cf 5e usb-storage: Bulk command S 0x43425355 T 0xe Trg 0 LUN 0 L 0 F 0 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: command_abort() called usb-storage: Bulk status result = -104 usb-storage: -- transport indicates error, resetting usb-storage: Bulk reset requested usb_control/bulk_msg: timeout usb-storage: Bulk soft reset failed -110 usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping.
_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
