Hi, I have post recently the problem with that camera. Some people (THANK YOU
ALL) tried to help, but still no progress.
So I'll repeat everything, maybe someone else can give me an advice.
So, I'm using RedHat 9, kernel 2.4.20.
When I plug the camera: here is the result in /var/log/message:
Jun 3 18:23:01 localhost kernel: hub.c: new USB device 00:1d.2-1, assigned
address 2
Jun 3 18:23:02 localhost kernel: usb.c: USB device 2 (vend/prod 0x4dd/0x7005)
is not claimed by any active driver.
Jun 3 18:23:05 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB
product 4dd/7005/10
Jun 3 18:23:06 localhost kernel: Initializing USB Mass Storage driver...
Jun 3 18:23:06 localhost kernel: usb.c: registered new driver usb-storage
Jun 3 18:23:06 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Jun 3 18:23:06 localhost kernel: USB Mass Storage support registered.
Jun 3 18:23:06 localhost devlabel: devlabel service started/restarted
------------
This is the output of dmesg:
hub.c: new USB device 00:1d.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x4dd/0x7005) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
WARNING: USB Mass Storage data integrity not assured
-------------------
This is in /proc/scsi/scsi:
[EMAIL PROTECTED] scsi]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-RW 52X24 Rev: K.GC
Type: CD-ROM ANSI SCSI revision: 02
??????????? THIS IS STRANGE - there is no camera listed :( ??????
------------------------
This is
[EMAIL PROTECTED] scsi]# cat usb-storage-0/1
Host scsi1: usb-storage
Vendor: Unknown
Product: Unknown
Serial Number: 0549849467
Protocol: 8070i
Transport: Control/Bulk
GUID: 04dd70050000000549849467
Attached: Yes
????? THE DEVICE IS ATTACHED ????!?!?!?!
-------------------------------------------------
I have also installed sg3_utils (there is no version for RedHat, but I found
some rpm in rpmfind.net)
here is the output from:
[EMAIL PROTECTED] scsi]# sg_map
/dev/sg0 /dev/scd0
!!!!----------- scd0 seems to be my cd burner
[EMAIL PROTECTED] scsi]# sg_scan
/dev/sg0: scsi0 channel=0 id=0 lun=0 [em] type=5
So, it seems that it finds only the cd-burner.
-------------------------------
It is very strange, why kernel reports that it finds the usb-mass-storrage,
but there is no track in proc/scsi system???
Nevertheless I tried different mount's like:
[EMAIL PROTECTED] scsi]# mount -t auto /dev/sda /mnt/usb
mount: /dev/sda is not a valid block device
I received the same for: sda0, sda1, sdb, sdb0, sdb1 .... sdexxxx
I tried also -t vfat, -t msdos
always the same :(
If you need more info, or more things to try .... pease, tell me, I'll try
everything :) (without reinstalling :) )
Thanks again to all that have tried to help me and to all of you, which will
try to help me in future.
Sunny
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best
thread debugger on the planet. Designed with thread debugging features
you've never dreamed of, try TotalView 6 free at www.etnus.com.
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
