It doesn't look like you have the EHCI driver loaded in the /proc/bus/usb/devices file... did you? I see it in the ehci file.
Normally this would be because you don't have SCSI_MULTI_LUN turned on, but you say you do... try doing; echo >/proc/scsi/scsi "scsi add-single-device 1 0 0 1" On Fri, 13 Jun 2003, David Hedbor wrote: > > I just upgraded my system to 2.4.21 (release) for the better USB 2.0 > support. Now my Apacer USB2.0 card reader works (it's "6-in-1" > although it's really just four physical formats). In either case, it's > detected and compact flash works great. However I only have /dev/sda > which is the CF. The other three formats (actually, only tried Secure > Digital since I don't use the other two) aren't found. I am guessing > that there should somehow be multiple LUN's or multiple devices, or > something (in windows 4 separate devices show up). Various relevant > such as /proc/bus/usb/devices and the USB-viewified version is > attached in the tar file. I do have "probe all luns" enabled, which > you can see from the excessive representation of the ide-scsi CD and > DVD drives. > > Any hints would be appreciated. Thanks. > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.NET email is sponsored by: eBay Great deals on office technology -- on eBay now! Click here: http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
