On Thu, Jun 26, 2003 at 12:01:50AM +0200, Dirk Aust wrote: > I had same problem, it seems as if this occurs, when you format the card with > PocketPC. You should consider to format them on Linux, afterwards it's also > usable with PocketPC. >
No, I have tried. For the camera it is only useful if formated under XP using FAT16. Afterwards it can be formated in the camera. Linux however cannot read this: ---snip--- Jun 26 21:28:52 ochenta kernel: sda : READ CAPACITY failed. Jun 26 21:28:52 ochenta kernel: sda : status = 1, message = 00, host = 0, driver = 08 Jun 26 21:28:52 ochenta kernel: Info fld=0xa00 (nonstd), Current sd00:00: sense key Not Ready Jun 26 21:28:52 ochenta kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Jun 26 21:28:52 ochenta kernel: sda: test WP failed, assume Write Enabled Jun 26 21:28:52 ochenta kernel: /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0 Jun 26 21:28:52 ochenta kernel: I/O error: dev 08:00, sector 0 Jun 26 21:28:52 ochenta kernel: unable to read partition table Jun 26 21:28:52 ochenta kernel: I/O error: dev 08:00, sector 0 ---snap--- If I format in under linux, it cannot be read from the camera. If I would know, which format is acceptable to a) the camera b) linux then I could do something. Tnx Thomas -- Thomas Hahn == [EMAIL PROTECTED] ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
