That could be what it is then. There is no standard for that (AFAIK) and this would explain why the "Cls=ff" (the class of the device is vendor specific). This would probably mean you'd need to create a driver for it using information from the vendor or revserse engineer the protocal using USB Snoopy on Windows. Or you could ask the vendor if they will support linux.
BTW, I just looked at the working device list and there are three entries for this vendor:product; 07cc:0004 Viking Components IntelliFlash SmartMedia, CompactFlash, and ATA Card Reader/Writer show 07cc:0004 Carry, Inc. UISA2 SmartMedia, CompactFlash, and ATA Card Reader/Writer show 07cc:0004 Lexar Media Digital Film Reader SmartMedia, CompactFlash, and ATA Card Reader/Writer show The text cut-and-paste missed out the red cross that shows these all do not work. Looking through those posts it looks like there might be some hope. There something claiming to be a driver for one of those devices; http://www.dauskardt.de/carry.html >From that page it sounds like the vendor did help! On Wed, 6 Aug 2003, Carl Miller wrote: > > > Here's the Viking usb/devices dump again... > > > > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > > > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 > > > P: Vendor=07cc ProdID=0004 Rev= 0.01 > > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > > > I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > > I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > > > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms > > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > > E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms > > > E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms > > > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > > That one looks really wierd for a storage device. > > It's possible it may have aspirations of being more than a storage > device. I'll tell you all I know about it. Unfortunately, I don't > have the box or owner's manual, as it's a loaner. > > It's in a neat translucent blue case. On the top, it says "Viking > Components", and their logo, "Intelliflash", and "USB flash memory > reader". On the bottom, it's got a simple sticker with FCC and CE > marks, "Card Reader/Writer", and "MODEL: RFLREAD/U", then another > sticker with a serial number and barcode. It's got a molded-in USB > cable coming out the back of it, with a strain relief and a ferrite > core. > > It's got two slots: one SmartMedia, and one PCMCIA type-II. It > comes with a PCMCIA-to-CF adapter (also Viking Components) installed, > so it's clear that the intended primary use is for CF flash/disk > devices. But there's an eject button for the PCMCIA slot, which does > indeed eject the bundled PCMCIA-to-CF adapter. Peering inside the > PCMCIA opening, I see three ICs. One 24-pin DIP, one 20-pin SOIC, and > one TSOP that I can't get a pin count on, but I'm guessing it's in the > 80 to 100 range. I've tried to take it apart a couple times (the case > is a two-piece snap-together), but it's put together pretty tightly, > and it doesn't seem like I'll be able pull the case apart with the tools > I have without breaking something. > > Anyway, with a full PCMCIA slot and more logic (or at least less > vertically integrated logic) than I'd imagine the average USB flash- > only reader has on board, it could be that it's trying to be a generic > USB-to-PCMCIA bridge device. Maybe we'd get further if we tried to treat > it as such? > > > ------Carl > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
