Problem is none of the devices I have on the usb ports are showing up in
/dev or in /proc/bus/usb/devices. there is an event0, event1, event2,
mice, and mouse0 in /dev/input but there is no activity on any of them
when I try the joystick or tablet.
I have a wacom tablet and a gravis joystick on the usb ports.
==== /proc/version =====================
Linux version 2.6.0-test3 ([EMAIL PROTECTED]) (gcc version 3.3.1) #1 SMP Sat
Aug 16 09:05:10 CDT 2003
========================================
==== /proc/cpuinfo =====================
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) MP 2000+
stepping : 2
cpu MHz : 1666.812
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3284.99
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1666.812
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 3325.95
========================================
==== /proc/bus/usb/devices =============
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.0-test3 ohci-hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
========================================
==== /proc/ioports =====================
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1010-1013 : 0000:00:00.0
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:05.0
3000-3fff : PCI Bus #02
3000-30ff : 0000:02:04.0
3400-347f : 0000:02:08.0
3400-347f : 0000:02:08.0
3480-349f : 0000:02:07.0
3480-349f : EMU10K1
34a0-34af : 0000:02:05.0
34a0-34a7 : ide2
34a8-34af : ide3
34b0-34b3 : 0000:02:05.0
34b4-34b7 : 0000:02:05.0
34b6-34b6 : ide2
34b8-34bf : 0000:02:05.0
34c0-34c7 : 0000:02:05.0
34c0-34c7 : ide2
34c8-34cf : 0000:02:07.1
34c8-34cf : emu10k1-gp
80e0-80ef : amd756-smbus
f000-f00f : 0000:00:07.1
f000-f007 : ide0
f008-f00f : ide1
========================================
==== /proc/iomem =======================
00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000cd000-000cd7ff : Extension ROM
000cd800-000cdfff : Extension ROM
000ce000-000cffff : Extension ROM
000f0000-000fffff : System ROM
00100000-1feeffff : System RAM
00100000-002a052f : Kernel code
002a0530-003436ff : Kernel data
1fef0000-1fefefff : ACPI Tables
1feff000-1fefffff : ACPI Non-volatile Storage
1ff00000-1ff7ffff : System RAM
1ff80000-1fffffff : reserved
c0000000-c00fffff : PCI Bus #01
c0000000-c000ffff : 0000:01:05.0
c0100000-c01fffff : PCI Bus #02
c0100000-c0103fff : 0000:02:06.0
c0104000-c0104fff : 0000:02:00.0
c0104000-c0104fff : ohci-hcd
c0105000-c0105fff : 0000:02:04.0
c0105000-c0105fff : aic7xxx
c0106000-c01067ff : 0000:02:06.0
c0106000-c01067ff : ohci1394
c0106800-c010687f : 0000:02:08.0
c0400000-c0400fff : 0000:00:00.0
d0000000-dfffffff : 0000:00:00.0
e0000000-efffffff : PCI Bus #01
e0000000-efffffff : 0000:01:05.0
e0000000-e0ffffff : vesafb
fec00000-fec03fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
========================================
==== /proc/modules =====================
3c59x 39080 0 - Live 0xe1c44000
snd_pcm_oss 53732 0 - Live 0xe1c35000
snd_mixer_oss 19392 2 snd_pcm_oss, Live 0xe1c09000
snd_seq_midi 8608 0 - Live 0xe1b49000
snd_emu10k1_synth 8192 0 - Live 0xe1b16000
snd_emux_synth 38400 1 snd_emu10k1_synth, Live 0xe1b7a000
snd_seq_virmidi 8064 1 snd_emux_synth, Live 0xe1b13000
snd_seq_midi_event 8256 2 snd_seq_midi,snd_seq_virmidi, Live 0xe1b0f000
snd_seq_midi_emul 8128 1 snd_emux_synth, Live 0xe1a83000
snd_seq 59344 5
snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul, Live
0xe1c14000
snd_emu10k1 97604 2 snd_emu10k1_synth, Live 0xe1b85000
snd_rawmidi 25632 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live
0xe1b30000
snd_pcm 102176 2 snd_pcm_oss,snd_emu10k1, Live 0xe1b4f000
snd_timer 26628 2 snd_seq,snd_pcm, Live 0xe1b28000
snd_seq_device 8328 6
snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi, Live
0xe1b0b000
snd_ac97_codec 53444 1 snd_emu10k1, Live 0xe1b19000
snd_page_alloc 11908 2 snd_emu10k1,snd_pcm, Live 0xe1aa5000
snd_util_mem 4672 2 snd_emux_synth,snd_emu10k1, Live 0xe1a86000
snd_hwdep 8992 1 snd_emu10k1, Live 0xe1aa1000
snd 53028 15
snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq,snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep,
Live 0xe1ae1000
soundcore 9984 2 snd, Live 0xe1a6a000
uinput 6464 0 - Live 0xe1a6e000
pcspkr 3784 0 - Live 0xe1a29000
lp 10912 0 - Live 0xe1a7f000
parport_pc 41704 1 - Live 0xe1afb000
parport 44776 2 lp,parport_pc, Live 0xe1aef000
isofs 36348 0 - Live 0xe1a8a000
zlib_inflate 22464 1 isofs, Live 0xe1a30000
vfat 16896 0 - Live 0xe1a64000
msdos 11520 0 - Live 0xe1a1e000
fat 48032 2 vfat,msdos, Live 0xe1a72000
videodev 10048 0 - Live 0xe1a25000
rtc 14020 0 - Live 0xe1a2b000
hw_random 5588 0 - Live 0xe1a22000
grip 7296 0 - Live 0xe1a18000
emu10k1_gp 3712 0 - Live 0xe1962000
gameport 5120 2 grip,emu10k1_gp, Live 0xe1a1b000
wacom 11520 0 - Live 0xe19d3000
evdev 9728 1 - Live 0xe19e8000
joydev 9728 0 - Live 0xe19d7000
raw1394 30540 0 - Live 0xe1a0f000
dv1394 21824 0 - Live 0xe1a08000
video1394 19136 0 - Live 0xe1a02000
ohci1394 36168 2 dv1394,video1394, Live 0xe19a8000
ieee1394 224556 4 raw1394,dv1394,video1394,ohci1394, Live 0xe1aa9000
aic7xxx 176844 0 - Live 0xe1a37000
sg 38168 0 - Live 0xe19dd000
sr_mod 16164 0 - Live 0xe19a3000
scsi_mod 83060 3 aic7xxx,sg,sr_mod, Live 0xe19ec000
ide_cd 41220 0 - Live 0xe198d000
cdrom 35488 2 sr_mod,ide_cd, Live 0xe1999000
radeon 120620 0 - Live 0xe19b2000
agpgart 32236 0 - Live 0xe1973000
psmouse 13960 0 - Live 0xe196e000
floppy 60820 0 - Live 0xe197d000
i2c_amd756 5892 0 - Live 0xe195f000
i2c_dev 10688 0 - Live 0xe1964000
i2c_core 25288 2 i2c_amd756,i2c_dev, Live 0xe1926000
thermal 13840 0 - Live 0xe195a000
processor 14640 1 thermal, Live 0xe1955000
fan 4172 0 - Live 0xe1912000
button 6232 0 - Live 0xe1923000
ohci_hcd 19264 0 - Live 0xe191d000
usbcore 112348 4 wacom,ohci_hcd, Live 0xe192e000
========================================
==== ver_linux =========================
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux pheuri 2.6.0-test3 #1 SMP Sat Aug 16 09:05:10 CDT 2003 i686
unknown unknown GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Linux C++ Library 5.0.5
Procps 3.1.11
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded 3c59x snd_pcm_oss snd_mixer_oss snd_seq_midi
snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event
snd_seq_midi_emul snd_seq snd_emu10k1 snd_rawmidi snd_pcm snd_timer
snd_seq_device snd_ac97_codec snd_page_alloc snd_util_mem snd_hwdep snd
soundcore uinput pcspkr lp parport_pc parport isofs zlib_inflate vfat
msdos fat videodev rtc hw_random grip emu10k1_gp gameport wacom evdev
joydev raw1394 dv1394 video1394 ohci1394 ieee1394 aic7xxx sg sr_mod
scsi_mod ide_cd cdrom radeon agpgart psmouse floppy i2c_amd756 i2c_dev
i2c_core thermal processor fan button ohci_hcd usbcore
=================================
==== lscpi ======================
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at c0400000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 1010 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0000000-c00fffff
Prefetchable memory behind bridge: e0000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev
05)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
(rev 04)
(prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev
03)
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev
05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=234
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL
[Radeon 8500 LE] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon 8500
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 10
Interrupt: pin A routed to IRQ 18
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at c0000000 (32-bit, non-prefetchable)
[size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB
(rev 07) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at c0104000 (32-bit, non-prefetchable)
[size=4K]
02:04.0 SCSI storage controller: Adaptec AHA-2930CU (rev 03)
Subsystem: Adaptec: Unknown device 3869
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 1000ns max), cache line size 10
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 3000 [disabled] [size=256]
Region 1: Memory at c0105000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 SCSI storage controller: Artop Electronic Corp ATP865 (rev 02)
Subsystem: Artop Electronic Corp ATP865
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 254 (2750ns min, 1000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 34c0 [size=8]
Region 1: I/O ports at 34b4 [size=4]
Region 2: I/O ports at 34b8 [size=8]
Region 3: I/O ports at 34b0 [size=4]
Region 4: I/O ports at 34a0 [size=16]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [58] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394
Controller (prog-if 10 [OHCI])
Subsystem: Unknown device 167e:0750
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 10
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0106000 (32-bit, non-prefetchable)
[size=2K]
Region 1: Memory at c0100000 (32-bit, non-prefetchable)
[size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
Subsystem: Creative Labs SBLive! Player 5.1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 3480 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 34c8 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado]
(rev 78)
Subsystem: Tyan Computer: Unknown device 2466
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 2500ns max), cache line size 10
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 3400 [size=128]
Region 1: Memory at c0106800 (32-bit, non-prefetchable)
[size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
==========================================
On Sun, 2003-08-17 at 04:19, Ged Haywood wrote:
> Hi there,
>
> On Sat, 16 Aug 2003, Robin Cook wrote:
>
> > I am testing the 2.6.0-test3 kernel and I can't seem to get the USB
> > devices to work. I seems like it is seeing the USB bus etc but doesn't
> > seem to be seeing the wacom tablet or Joystick on the USB ports.
> >
> > I am not sure what to start checking to see where the problem is.
>
> Read the documentation, post the information requested for example in
>
> http://www.linux-usb.org/FAQ.html#ts1
>
> 73,
> Ged.
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
