I try to make this modem working.
It works very well on kernel 2.4 series.
It work with some kernel 2.6 until test2-mm1.
But since test2-mm1, the newer kernel doesn't work anymore.
There is 2 related drivers for this modem.
The one which is included in the kernel and which can be found here :
http://www.linux-usb.org/SpeedTouch/
and the one which I've always used until now :
speedtouch.sourceforge.net
when I notice that the old one doesn't work anymore, I try with the driver
which included in the kernel, without success.
It crashed when I do "pppd call adsl".
I can load the firmware.
And here is messages in syslog :
Aug 19 22:00:26 serveur modem_run[337]: modem_run version 1.1 started by root
uid 0
Aug 19 22:00:28 serveur kernel: usb 1-2: bulk timeout on ep5in
Aug 19 22:00:28 serveur kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x85 len
512 ret -110
Aug 19 22:00:43 serveur modem_run[337]: ADSL synchronization has been
obtained Aug 19 22:00:43 serveur modem_run[337]: ADSL line is up (608 kbit/s
down | 160 kbit/s up)
Aug 19 22:00:43 serveur modprobe: FATAL: Module ipv6 not found.
Aug 19 22:00:43 serveur pppd[345]: pppd 2.4.1 started by root, uid 0
Aug 19 22:00:43 serveur pppd[345]: Using interface ppp0
Aug 19 22:00:44 serveur pppd[345]: Connect: ppp0 <--> /dev/pts/0
Aug 19 22:00:44 serveur kernel: ip_conntrack version 2.1 (768 buckets, 6144
max) - 300 bytes per conntrack
Aug 19 22:00:44 serveur pppoa3[346]: PPPoA3 version 1.1 started by root (uid
0)
Aug 19 22:00:44 serveur pppoa3[346]: Control thread ready
Aug 19 22:00:44 serveur pppoa3[352]: ppp(d) --> pppoa3 --> modem stream
ready Aug 19 22:00:44 serveur pppoa3[353]: modem --> pppoa3 --> ppp(d)
stream ready Aug 19 22:00:44 serveur pppoa3[353]: Error reading usb urb
Aug 19 22:00:44 serveur pppoa3[346]: Woken by a sem_post event -> Exiting
Aug 19 22:00:44 serveur pppoa3[346]: Read from ppp Canceled
Aug 19 22:00:44 serveur pppoa3[346]: Write to ppp Canceled
Aug 19 22:00:44 serveur pppoa3[346]: Exiting
Aug 19 22:00:44 serveur pppd[345]: Modem hangup
Aug 19 22:00:44 serveur pppd[345]: Connection terminated.
Aug 19 22:00:44 serveur kernel: usbfs: usb_submit_urb returned -32
Aug 19 22:00:44 serveur kernel: Device class 'ppp0' does not have a release()
function, it is broken and must
be fixed.
Aug 19 22:00:44 serveur kernel: Badness in class_dev_release at
drivers/base/class.c:201
Aug 19 22:00:44 serveur kernel: Call Trace:
Aug 19 22:00:44 serveur kernel: [kobject_cleanup+54/64]
kobject_cleanup+0x36/0x40
Aug 19 22:00:44 serveur kernel: [netdev_run_todo+267/464]
netdev_run_todo+0x10b/0x1d0
Aug 19 22:00:44 serveur kernel: [_end+114517535/1070384712]
ppp_shutdown_interface+0x87/0xe0 [ppp_generic]
Aug 19 22:00:44 serveur kernel: [_end+114504362/1070384712]
ppp_ioctl+0x802/0x820 [ppp_generic]
Aug 19 22:00:44 serveur kernel: [__fput+193/288] __fput+0xc1/0x120
Aug 19 22:00:44 serveur kernel: [sys_ioctl+263/640] sys_ioctl+0x107/0x280
Aug 19 22:00:44 serveur kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Aug 19 22:00:44 serveur kernel:
Aug 19 22:00:44 serveur kernel: ip_tables: (C) 2000-2002 Netfilter core team
Aug 19 22:00:44 serveur pppd[345]: Using interface ppp0
Aug 19 22:00:44 serveur pppd[345]: Connect: ppp0 <--> /dev/pts/0
Aug 19 22:00:44 serveur pppoa3[364]: PPPoA3 version 1.1 started by root (uid
0)
Aug 19 22:00:44 serveur pppoa3[364]: Control thread ready
Aug 19 22:00:44 serveur pppoa3[374]: ppp(d) --> pppoa3 --> modem stream
ready Aug 19 22:00:44 serveur pppoa3[375]: modem --> pppoa3 --> ppp(d)
stream ready Aug 19 22:00:44 serveur pppoa3[375]: Error reading usb urb
Aug 19 22:00:44 serveur pppoa3[364]: Woken by a sem_post event -> Exiting
Aug 19 22:00:44 serveur pppoa3[364]: Read from ppp Canceled
Aug 19 22:00:44 serveur pppoa3[364]: Write to ppp Canceled
Aug 19 22:00:44 serveur kernel: usbfs: usb_submit_urb returned -32
Aug 19 22:00:44 serveur pppoa3[364]: Exiting
Aug 19 22:00:44 serveur pppd[345]: Modem hangup
Aug 19 22:00:44 serveur pppd[345]: Connection terminated.
Aug 19 22:00:44 serveur kernel: Device class 'ppp0' does not have a release()
function, it is broken and must
be fixed.
Aug 19 22:00:44 serveur kernel: Badness in class_dev_release at
drivers/base/class.c:201
Aug 19 22:00:44 serveur kernel: Call Trace:
Aug 19 22:00:44 serveur kernel: [kobject_cleanup+54/64]
kobject_cleanup+0x36/0x40
Aug 19 22:00:44 serveur kernel: [netdev_run_todo+267/464]
netdev_run_todo+0x10b/0x1d0
Aug 19 22:00:44 serveur kernel: [_end+114517535/1070384712]
ppp_shutdown_interface+0x87/0xe0 [ppp_generic]
Aug 19 22:00:44 serveur kernel: [_end+114504362/1070384712]
ppp_ioctl+0x802/0x820 [ppp_generic]
Aug 19 22:00:44 serveur kernel: [__fput+193/288] __fput+0xc1/0x120
Aug 19 22:00:44 serveur kernel: [sys_ioctl+263/640] sys_ioctl+0x107/0x280
Aug 19 22:00:44 serveur kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Aug 19 22:00:44 serveur kernel:
Aug 19 22:00:44 serveur pppoa3[386]: PPPoA3 version 1.1 started by root (uid
0)
Aug 19 22:00:44 serveur pppoa3[386]: Control thread ready
Aug 19 22:00:44 serveur pppoa3[389]: ppp(d) --> pppoa3 --> modem stream
ready Aug 19 22:00:44 serveur pppoa3[390]: modem --> pppoa3 --> ppp(d)
stream ready Aug 19 22:00:44 serveur pppoa3[390]: Error reading usb urb
Aug 19 22:00:44 serveur pppoa3[386]: Woken by a sem_post event -> Exiting
Aug 19 22:00:44 serveur pppoa3[386]: Read from ppp Canceled
Aug 19 22:00:44 serveur pppoa3[386]: Write to ppp Canceled
Aug 19 22:00:44 serveur kernel: usbfs: usb_submit_urb returned -32
Aug 19 22:00:44 serveur pppd[345]: Using interface ppp0
Aug 19 22:00:44 serveur pppoa3[386]: Exiting
Aug 19 22:00:44 serveur pppd[345]: Connect: ppp0 <--> /dev/pts/0
Aug 19 22:00:44 serveur pppd[345]: ioctl(PPPIOCSASYNCMAP): Inappropriate
ioctl for device(25)
Aug 19 22:00:44 serveur pppd[345]: tcflush failed: Input/output error
Aug 19 22:00:44 serveur kernel: Device class 'ppp0' does not have a release()
function, it is broken and must
be fixed.
Aug 19 22:00:44 serveur kernel: Badness in class_dev_release at
drivers/base/class.c:201
Aug 19 22:00:44 serveur kernel: Call Trace:
Aug 19 22:00:44 serveur kernel: [kobject_cleanup+54/64]
kobject_cleanup+0x36/0x40
Aug 19 22:00:44 serveur kernel: [netdev_run_todo+267/464]
netdev_run_todo+0x10b/0x1d0
Aug 19 22:00:45 serveur kernel: [_end+114517535/1070384712]
ppp_shutdown_interface+0x87/0xe0 [ppp_generic]
Aug 19 22:00:45 serveur kernel: [_end+114504362/1070384712]
ppp_ioctl+0x802/0x820 [ppp_generic]
Aug 19 22:00:45 serveur kernel: [__fput+193/288] __fput+0xc1/0x120
Aug 19 22:00:45 serveur kernel: [sys_ioctl+263/640] sys_ioctl+0x107/0x280
Aug 19 22:00:45 serveur kernel: [syscall_call+7/11] syscall_call+0x7/0xb
Aug 19 22:00:45 serveur kernel:
Aug 19 22:00:45 serveur pppd[345]: Exit.
so, the last kernel which work with this adsl modem is test2-mm1.
here is some informations when I'm running this kernel :
/proc/modules :
ipt_state 1248 12 - Live 0xc70d8000
ipt_multiport 1408 3 - Live 0xc70d6000
ipt_MASQUERADE 2656 1 - Live 0xc70d4000
iptable_filter 1952 1 - Live 0xc70cb000
ip_nat_irc 3248 0 - Live 0xc70c9000
ip_conntrack_irc 70100 1 ip_nat_irc, Live 0xc70b6000
ip_nat_ftp 3824 0 - Live 0xc704d000
iptable_nat 19436 4 ipt_MASQUERADE,ip_nat_irc,ip_nat_ftp, Live 0xc70a4000
ip_tables 15328 5
ipt_state,ipt_multiport,ipt_MASQUERADE,iptable_filter,iptable_nat, Live
0xc70aa000
ip_conntrack_ftp 70708 1 ip_nat_ftp, Live 0xc7091000
ip_conntrack 24336 7
ipt_state,ipt_MASQUERADE,ip_nat_irc,ip_conntrack_irc,ip_nat_ftp,iptable_nat,i
p_conntrack_ftp, Live 0xc706f000
n_hdlc 8228 1 - Live 0xc706b000
ppp_async 8992 0 - Live 0xc705e000
ppp_synctty 7040 1 - Live 0xc7015000
ppp_generic 26416 6 ppp_async,ppp_synctty, Live 0xc7063000
slhc 5984 1 ppp_generic, Live 0xc7039000
ohci_hcd 16064 0 - Live 0xc7048000
usbcore 92412 3 ohci_hcd, Live 0xc7076000
vfat 12448 0 - Live 0xc7043000
fat 39040 1 vfat, Live 0xc704f000
8139too 20064 0 - Live 0xc703d000
mii 3712 1 8139too, Live 0xc701a000
crc32 3776 1 8139too, Live 0xc7018000
unix 22064 16 - Live 0xc701d000
lspci -vvv :
00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if
00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 6400 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:12.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
Subsystem: OPTi Inc. 82C861
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e3001000 (32-bit, non-prefetchable) [size=4K]
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 6800 [size=256]
Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:14.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG
[Mystique] (rev 02) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at e1000000 (32-bit, prefetchable) [size=8M]
Region 2: Memory at e2000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
-------------------------------------------------------
This SF.net email is sponsored by Dice.com.
Did you know that Dice has over 25,000 tech jobs available today? From
careers in IT to Engineering to Tech Sales, Dice has tech jobs from the
best hiring companies. http://www.dice.com/index.epl?rel_code=104
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
