The latest bk fixes this problem for me.
version of isd200.c is 1.33
Sorry to mail you direct, wanted you to know.
cliffw
> >
>
> Sorry to reply to myself, but.
> I reverted to the 2.5.75 version of isd200.c and
> things now appear to work. Brute force..
> Patch at end
> cliffw
> ----------
> > System: Via C3
> > Mini-itx
> > VIA USB controller on motherboard
> >
> > Device: Archos jukebox
> > ISD-200
> > (also using a CD-ROM via firewire, that works fine, tested
> > with/witout)
> >
> > Life was good using <= linux-2.5.75. The 2.6.0-test* kernels are not happy.
> > If the usb_storage module is compiled in, boot is normal, when
> > device is plugged in, things stop here:
> > --
> > Aug 31 17:27:03 tinyOne kernel: hub 4-0:0: 2 ports detected
> > Aug 31 17:27:03 tinyOne kernel: Initializing USB Mass Storage driver...
> > Aug 31 17:27:03 tinyOne kernel: drivers/usb/core/usb.c: registered new driver
> > usb-storage
> > Aug 31 17:27:03 tinyOne kernel: USB Mass Storage support registered.
> > ---
> > No /dev/sd*, no good.
> >
> > < 2.5.75 i normally see this:
> > -----------
> > Aug 31 17:27:29 tinyOne kernel: scsi1 : SCSI emulation for USB Mass Storage devices
> > Aug 31 17:27:29 tinyOne kernel: Vendor: HITACHI_ Model: DK23CA-20 Rev:
> > 00H1
> > ....and on
> > ------------
> > Device looks fine in /proc/scsi/usb-storage/1
> >
> > Host scsi1: usb-storage
> > Vendor: In-System Design
> > Product: USB Storage Adapter
> > Serial Number: 4804A07970A2FFA1
> > Protocol: Transparent SCSI
> > Transport: Bulk
> > Quirks:
> >
> >
> > /sbin/rescan-scsi-bus.sh no longer detects the firewire device,
> > echo 'scsi add-single-device 1 0 1 0' >/proc/scsi/scsi
> > never returns.
> >
> > If usb_storage is compiled as a module, insmod usb_storage never returns.
> > The system is useable otherwise. -test4 requires me to use 'acpi=off' (via-rhine)
> > so i've tested that also :( Symptoms unchanged since -test1, have tried various
> > -mm*
> > patches also.
> >
> > I though i'd seen mention of this problem elsewhere, but i haven't been able to
> > search out any email's with my problem. This involves possibly ide-scsi,scsi or
> > usb_storage,
> > so if someone could point me somewhere, i'd appreciate
> >
> > cliffw
> ----------
> patch to revert isd200.c -> 2.5.75
> -----------------
>
> --- linux-2.6.0-test4-stk/drivers/usb/storage/isd200.c 2003-08-22
> 16:55:45.000000000 -0700
> +++ linux-2.6.0-test4-old/drivers/usb/storage/isd200.c 2003-09-02
> 21:11:05.000000000 -0700
> @@ -280,7 +280,6 @@
>
> /* maximum number of LUNs supported */
> unsigned char MaxLUNs;
> - struct scsi_cmnd srb;
> };
>
>
> @@ -405,15 +404,15 @@
> void* pointer, int value )
> {
> union ata_cdb ata;
> + struct scsi_cmnd srb;
> struct scsi_device srb_dev;
> struct isd200_info *info = (struct isd200_info *)us->extra;
> - struct scsi_cmnd *srb = &info->srb;
> int status;
>
> memset(&ata, 0, sizeof(ata));
> + memset(&srb, 0, sizeof(srb));
> memset(&srb_dev, 0, sizeof(srb_dev));
> - srb->device = &srb_dev;
> - ++srb->serial_number;
> + srb.device = &srb_dev;
>
> ata.generic.SignatureByte0 = info->ConfigData.ATAMajorCommand;
> ata.generic.SignatureByte1 = info->ConfigData.ATAMinorCommand;
> @@ -426,9 +425,9 @@
> ata.generic.RegisterSelect =
> REG_CYLINDER_LOW | REG_CYLINDER_HIGH |
> REG_STATUS | REG_ERROR;
> - srb->sc_data_direction = SCSI_DATA_READ;
> - srb->request_buffer = pointer;
> - srb->request_bufflen = value;
> + srb.sc_data_direction = SCSI_DATA_READ;
> + srb.request_buffer = pointer;
> + srb.request_bufflen = value;
> break;
>
> case ACTION_ENUM:
> @@ -438,7 +437,7 @@
> ACTION_SELECT_5;
> ata.generic.RegisterSelect = REG_DEVICE_HEAD;
> ata.write.DeviceHeadByte = value;
> - srb->sc_data_direction = SCSI_DATA_NONE;
> + srb.sc_data_direction = SCSI_DATA_NONE;
> break;
>
> case ACTION_RESET:
> @@ -447,7 +446,7 @@
> ACTION_SELECT_3|ACTION_SELECT_4;
> ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
> ata.write.DeviceControlByte = ATA_DC_RESET_CONTROLLER;
> - srb->sc_data_direction = SCSI_DATA_NONE;
> + srb.sc_data_direction = SCSI_DATA_NONE;
> break;
>
> case ACTION_REENABLE:
> @@ -456,7 +455,7 @@
> ACTION_SELECT_3|ACTION_SELECT_4;
> ata.generic.RegisterSelect = REG_DEVICE_CONTROL;
> ata.write.DeviceControlByte = ATA_DC_REENABLE_CONTROLLER;
> - srb->sc_data_direction = SCSI_DATA_NONE;
> + srb.sc_data_direction = SCSI_DATA_NONE;
> break;
>
> case ACTION_SOFT_RESET:
> @@ -465,16 +464,16 @@
> ata.generic.RegisterSelect = REG_DEVICE_HEAD | REG_COMMAND;
> ata.write.DeviceHeadByte = info->DeviceHead;
> ata.write.CommandByte = WIN_SRST;
> - srb->sc_data_direction = SCSI_DATA_NONE;
> + srb.sc_data_direction = SCSI_DATA_NONE;
> break;
>
> case ACTION_IDENTIFY:
> US_DEBUGP(" isd200_action(IDENTIFY)\n");
> ata.generic.RegisterSelect = REG_COMMAND;
> ata.write.CommandByte = WIN_IDENTIFY;
> - srb->sc_data_direction = SCSI_DATA_READ;
> - srb->request_buffer = (void *)&info->drive;
> - srb->request_bufflen = sizeof(struct hd_driveid);
> + srb.sc_data_direction = SCSI_DATA_READ;
> + srb.request_buffer = (void *)&info->drive;
> + srb.request_bufflen = sizeof(struct hd_driveid);
> break;
>
> default:
> @@ -482,9 +481,9 @@
> break;
> }
>
> - memcpy(srb->cmnd, &ata, sizeof(ata.generic));
> - srb->cmd_len = sizeof(ata.generic);
> - status = usb_stor_Bulk_transport(srb, us);
> + memcpy(srb.cmnd, &ata, sizeof(ata.generic));
> + srb.cmd_len = sizeof(ata.generic);
> + status = usb_stor_Bulk_transport(&srb, us);
> if (status == USB_STOR_TRANSPORT_GOOD)
> status = ISD200_GOOD;
> else {
> @@ -835,7 +834,7 @@
> int detect )
> {
> int status = ISD200_GOOD;
> - unsigned char *regs = us->iobuf;
> + unsigned char regs[8];
> unsigned long endTime;
> struct isd200_info *info = (struct isd200_info *)us->extra;
> int recheckAsMaster = FALSE;
> @@ -857,7 +856,7 @@
> break;
>
> status = isd200_action( us, ACTION_READ_STATUS,
> - regs, 8 );
> + regs, sizeof(regs) );
> if ( status != ISD200_GOOD )
> break;
>
> -------------
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> >
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
