TO reinterate what David asked for. All that output with it working and then the exact same output when it fails.
On Tue, 9 Sep 2003, Cyriac BENOIT wrote: > Hello David, > > Le 09/09/2003 12:50, David Brownell a �crit : > > >On Tue, 9 Sep 2003, Cyriac BENOIT wrote: > > > > > >Again, this is when everything is alright. When i've got my "problem", > > >the Saitek PLC (plugged in the hub) is connected en Bus 3. > > > > > >lsusb -t: > > >---8<----SNiP----8<--- > > >Bus# 5 > > >`-Dev# 1 Vendor 0x0000 Product 0x0000 > > > `-Dev# 2 Vendor 0x0409 Product 0x0058 > > > `-Dev# 3 Vendor 0x06a3 Product 0x0109 > > >Bus# 4 > > >`-Dev# 1 Vendor 0x0000 Product 0x0000 > > >Bus# 3 > > >`-Dev# 1 Vendor 0x0000 Product 0x0000 > > >Bus# 2 > > >`-Dev# 1 Vendor 0x0000 Product 0x0000 > > >Bus# 1 > > >`-Dev# 1 Vendor 0x0000 Product 0x0000 > > > `-Dev# 2 Vendor 0x05fe Product 0x0011 > > > > Can you report the _same_ information both before and after the failure? > > Well the "failure" is just rebooting the computer. After the "physical" > installation of the PCI card, I plug my USB2.0 devices, and the result > is what I sent beefore (see above). > > After rebooting, this is my 'lsusb -tv': > > Bus# 5 > `-Dev# 1 Vendor 0x0000 Product 0x0000 > Bus# 4 > `-Dev# 1 Vendor 0x0000 Product 0x0000 > Bus# 3 > `-Dev# 1 Vendor 0x0000 Product 0x0000 > `-Dev# 2 Vendor 0x0409 Product 0x0058 > Bus# 2 > `-Dev# 1 Vendor 0x0000 Product 0x0000 > Bus# 1 > `-Dev# 1 Vendor 0x0000 Product 0x0000 > `-Dev# 2 Vendor 0x05fe Product 0x0011 > > (only difference is that the device is on Bus 3). > > > I'm having to guess what you mean to say is failing, which isn't useful. > > Simply : after the install, I can transfeer files on my Archos at > 10Mb/s, and after rebooting, I can transfer files at 400b/s... > > > The /proc/bus/usb/devices output, and kernel dmesgs, would help; it's > > more informative 'lsusb -t' (and more compact than 'lsusb -tv'). > > /proc/bus/usb/devices: > ---8<-----SNiP-----8<--- > T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4 > B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.04 > S: Manufacturer=Linux 2.4.22 ehci_hcd > S: Product=VIA Technologies, Inc. USB 2.0 > S: SerialNumber=00:09.2 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0409 ProdID=0058 Rev= 1.00 > S: Manufacturer=NEC Corporation > S: Product=USB2.0 Hub Controller > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=a000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=a400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=d000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI-alt Root Hub > S: SerialNumber=d400 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=05fe ProdID=0011 Rev= 0.10 > S: Manufacturer=Cypress Sem. > S: Product=PS2/USB Browser Combo Mouse > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbmouse > E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms > ---8<-----SNiP-----8<--- > > For the dmesg and other stuff, I will forward my first mail on this list > to you. > > > Also, does 2.6.0-test5 behave the same? That'd be more interesting > > than looking at 2.4.23-pre3 (or newer). > > In fact, with ehci-hcd and uhci-hcd, the 2.6.0-test5 (compiled last > night) just won't boot. The screen is frozen just after the "Input PC > speaker" part... > > Thank you for your time and effort. > > Cyriac > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
