Hope this is the right list. I am booting 2.4.22 on a laptop and I
cannot load the ehci-hcd module. I get this error:
PCI: Enabling device 00:03.3 (0000 -> 0002)
PCI: No IRQ known for interrupt pin D of device 00:03.3. Please try
using pci=biosirq.
hdc.c: Found HC with no IRQ. Check BIOS/PCI 00:03.3 setup!
I then used "pci=biosirq" and got the same error.
I am booting from the latest Knoppix CD using "noapic" (or else the boot
fails). The laptop itself (my Dads) runs WinXP which assigns IRQ 20-23
to the four USB controllers and works just fine.
I am not on the list, please CC me.
The lspci entry for the vanilla boot says:
00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e4001000 (32-bit, non-prefetchable)
[size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e4002000 (32-bit, non-prefetchable)
[size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e4003000 (32-bit, non-prefetchable)
[size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0
(prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- <<<<<<< diff
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 0
Region 0: Memory at e4004000 (32-bit, non-prefetchable)
[size=4K] <<<<<<< diff
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
and with biosirq:
00:03.0 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e4001000 (32-bit, non-prefetchable)
[size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e4002000 (32-bit, non-prefetchable)
[size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e4003000 (32-bit, non-prefetchable)
[size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0
(prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0028
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- <<<<<<< diff
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 0
Region 0: Memory at e4004000 (32-bit, non-prefetchable)
[disabled] [size=4K] <<<<<<< diff
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Any suggestions?
TIA - I am not on this list so please CC me.
--
Eyal Lebedinsky ([EMAIL PROTECTED]) <http://samba.org/eyal/>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
