Hi Stephen, big thx for the tip with the USB-Legacy Support in BIOS after disabling it i was able to use the ehci driver for the harddrive =) Man I'm so glad now i can fully use linux on my laptop...
Thousand thanks, xDAMNx On Wednesday 24 September 2003 14:01, you wrote: > Perhaps there is something in your distribution that only mounts > /proc/bus/usb when the old 1.1 host controllers are loaded? Can you try > mounting it by hand (read the User Guide to find it how if you don't > know). > > Do you have some sort of Legacy USB option turned on in your BIOS? That is > probably the case which might part of the problem. > > On Wed, 24 Sep 2003, Matthias Mantel wrote: > > Hi Stephen, > > > > i only see my hardrive if i additionally load the usb1.1 driver > > (usb-ohci) with only the ehci support enabled nothing shows up in > > /dev/usb/devices. But the strange thing the usb-keyboard and mouse > > work...(the mouse isn't mounted to /dev/usbmouse/) > > And with ehci only the usb storage driver wont be touched (dmesg) > > > > Thx for any further help, > > > > xDAMNx > > > > On Wednesday 24 September 2003 02:52, you wrote: > > > What's in /proc/bus/usb/devices? How can you test the speed of > > > something that doesn't show up? > > > > > > On Wed, 24 Sep 2003, Matthias Mantel wrote: > > > > Hi everyone, > > > > > > > > got following problem under 2.4.22 aswell as under 2.6.test5: > > > > > > > > the usb2 driver for my chipset (SiS 7XXX) seem to load successful: > > > > > > > > Code: > > > > dmesg | grep ehci > > > > ehci_hcd 0000:00:03.3: EHCI Host Controller > > > > ehci_hcd 0000:00:03.3: irq 5, pci mem e090d000 > > > > ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 > > > > ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 > > > > > > > > > > > > my usb keyboard and usb mouse work well, but when the usb2 harddrive > > > > is plugged in nothing happens. no message in dmesg that a new devices > > > > was detected....nothing.... so the usb-storage module can't load... > > > > > > > > my current lsmod: > > > > Code: > > > > lsmod > > > > Module Size Used by > > > > fglrx 192580 9 > > > > sis_agp 3584 1 > > > > agpgart 26696 1 sis_agp > > > > rtc 10920 0 > > > > usb_storage 23936 0 > > > > hid 23424 0 > > > > ehci_hcd 21888 0 > > > > sr_mod 13216 0 > > > > > > > > PS: this is the last thing to be working to get me using linux > > > > completely...erm i got my hardrive working with the usb1.1 support, > > > > but this is sl0w as hell... > > > > > > > > i've done following steps: > > > > > > > > loaded following modules: > > > > Code: > > > > > > > > ehci_hcd (for the usb2.0 support) > > > > ohci_hcd (for the usb1.1 support) > > > > usb_storage (storage support ;) > > > > > > > > > > > > everything works but a > > > > > > > > hdparm -Tt /dev/sda1 > > > > > > > > reveals a speed of 1MB/s > > > > Code: > > > > > > > > # hdparm -Tt /dev/sda1 > > > > > > > > /dev/sda1: > > > > Timing buffer-cache reads: 1080 MB in 2.00 seconds = 539.54 MB/sec > > > > Timing buffered disk reads: 4 MB in 3.90 seconds = 1.03 MB/sec > > > > > > > > > > > > but the kernel msges still say that usb 2.0 is enabled..... > > > > > > > > > > > > > > > > Any tips would be great, big thx in advance > > > > > > > > xDAMNx > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > This sf.net email is sponsored by:ThinkGeek > > > > Welcome to geek heaven. > > > > http://thinkgeek.com/sf > > > > _______________________________________________ > > > > [EMAIL PROTECTED] > > > > To unsubscribe, use the last form field at: > > > > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > > > > > > -- > > > /------------------------------------+-------------------------\ > > > > > > |Stephen J. Gowdy | SLAC, MailStop 34, | > > > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > > > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > > > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > > > > > \------------------------------------+-------------------------/ > > -- > /------------------------------------+-------------------------\ > > |Stephen J. Gowdy | SLAC, MailStop 34, | > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | > |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | > |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | > > \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
