Hi folks in the 2.6.0-test6 kernel (and previous) I cannot get my USB hard drive mounted. When switched on: I get a whole bunch of stuff:
usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Vendor: TOSHIBA Model: MK4018GAS Rev: Q1.0 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 and also in proc it gets identified correctly: cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TOSHIBA Model: MK4018GAS Rev: Q1.0 Type: Direct-Access ANSI SCSI revision: 02 root(eno,etc)# But when I want to mount it: mount /mnt/usbhd mount: device /dev/sda1 does not exists root(eno,etc)# The corresponding line in the fstab is: /dev/sda1 /mnt/usbhd ext3 noauto,user 0 0 with the 2.4.20 kernel it works like a smart. Any pointers? greetings Eildert Groeneveld -- Eildert Groeneveld =================================================== Institute for Animal Breeding Mariensee 31535 Neustadt Germany Tel : (+49)(0)5034 871155 Fax : (+49)(0)5034 871239 e-mail: [EMAIL PROTECTED] http://www.tzv.fal.de/~eg/ =================================================== ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
