My new HP49g+ calculator has a usb interface that works fine with hotplug under Linux
2.4.22 and the generic usbserial device after I "modprobe usbserial vendor=0x03F0
product=0x0121"
Unfortunately, the usb connection fails with Linux V2.6.0-test10 giving the following
errors:
hub 1-0:1.0: new USB device on port 2, assigned address 3
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 3 default language ID 0x409
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 500000
[c132b2a0] link (0132b1e2) element (0132e180)
Element != First TD
0: [c132e140] link (0132e180) e3 Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP)
(buf=0ecc04e0)
1: [c132e180] link (0132e1c0) e3 Stalled Babble Length=1 MaxLen=1 DT1 EndPt=0 Dev=3,
PID=69(IN) (buf=08f29980)
2: [c132e1c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=3,
PID=e1(OUT)(buf=00000000)
usb 1-2: control timeout on ep0in
And it takes my usb mouse with it.
Any suggestions?
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
