If anyone was interested in the Rio S10 or any S series Rio product, I have an update. I eventually found rioutil at http://rioutil.sourceforge.net/. This claims to work with most Rio products except for the 500, 600, and 800 which there are other projects for. I downloaded the CVS version, as is recommended by searching the forums, and it worked fine. There were 2 parse errors, but nothing you cant just comment out.
later--, jon On Tue, 2 Dec 2003 08:14:50 -0800 "Randy.Dunlap" <[EMAIL PROTECTED]> wrote: > On Tue, 2 Dec 2003 00:39:16 -0500 Jon Rafkind <[EMAIL PROTECTED]> > wrote: > > | The RioS10 is the only usb device connected. Here is > | /proc/bus/usb/devices: > | > | T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > | P: Vendor=0000 ProdID=0000 Rev= 0.00 > | S: Product=USB UHCI-alt Root Hub > | S: SerialNumber=ef80 > | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > | T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 > | D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > | P: Vendor=045a ProdID=5005 Rev= 0.00 > | S: Manufacturer=SONICblue Inc. > | S: Product=Rio S10 > | C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA > | I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=ff Driver=(none) > | E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > | E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > | > | I thought the same, that if the class is ff then it would need a > | proprietary device driver. Does the 2nd D line > | > | D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > | > | mean that it uses the class 00 driver? I am confused by the last I > | line where it shows the class number as ff. > > First look at the D (Device) line. It says Cls=00(>ifc ), where > >ifc means "see interface". So look at the I (Interface) line, > where it has Cls=ff(vend.), which means that the interface is > vendor-specific or proprietary. It's not using the usb-storage > class interface or any other well-known interface. > > > | later--, > | jon > | > | On Mon, 1 Dec 2003 21:24:22 -0800 > | "Randy.Dunlap" <[EMAIL PROTECTED]> wrote: > | > | > On Mon, 1 Dec 2003 23:58:35 -0500 Jon Rafkind > | > <[EMAIL PROTECTED]> wrote: > | > > | > | Hello, > | > | I am fairly new to the usb devices, but I have looked all over > | > | the > | > | internet and have come up empty handed. I recently bought the > | > | SonicBlue RioS10 and am trying to get it to work under linux. I > | > | see that it registers with the usb module in dmesg and also > | > | information is printed in /proc/bus/usb/devices about it. I > | > | never seem to get/dev/sda1, however. So far I have concluded > | > | that a seperate drives is needed as usb-storage doesnt seem to > | > | work. I downloaded the rio500 from sourceforge, but that looks > | > | for a /dev/usb/rio500 device specifically. Does anyone know if > | > | there is support for this device or if the rio500 could be > | > | hacked to work with the rioS10? > | > > | > Please post the contents of /proc/bus/usb/devices when the device > | > is connected so that we can see its device descriptors. That > | > should enable us to determine what kind of interface it is and > | > what kind of driver is required. If the device and interface > | > Class (Cls) fields are 0xff, that means vendor-specific or > | > proprietary, i.e., the device doesn't use a USB class interface, > | > so it will need a vendor-specific driver. > | > > | > -- > | > ~Randy > | > > > > -- > ~Randy > MOTD: Always include version info. > ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
