"Stephen J. Gowdy" <[EMAIL PROTECTED]> writes: > Do you have the EHCI driver loaded?
Whoops, thanks for that. Ok, now I'm connected to the drive at 480Mb/s. Using dd if=/dev/zero of=/mnt/... block=1024 count=1024000 (1000MB), I get writing rates of about 8MB/s. A similar command reading from the drive and writing to /dev/null gives me about 9MB/s. Any idea whether I can improve those numbers? (I can't connect to the drive with firewire for some reason.) Thanks, Dan > On Sat, 13 Dec 2003, Dan Christensen wrote (mostly trimmed): > >> I have an external Acomdata USB/Firewire 160G hard drive and a >> Cicero CardBus USB 2.0 and firewire card. My laptop (Dell Inspiron >> 4150) ... ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
