Hi,
I don't know if this is the right place for this problem because I don't know
if it's a bluez or a usb problem.
I'm using the last kernel 2.6.1-rc1 patch with patch-2.6.0-mh1 but this
happens with 2.6.0, 2.6.0-mm1, 2.6.0-mm2, 2.6.1-rc1-mm1 and with the 2.4.22
and 2.4.23 kernels.
I've got a DIGICOM PALLADIO bluetooth USB adapter with a CSR chipset:
When I start my system with this device already plugged it works well with NO
problems but when I plug it after the init scripts I've got a lot of this
errors from dmesg:
Jan 3 13:47:44 localhost hub 2-0:1.0: new USB device on port 2, assigned
address 2
Jan 3 13:47:45 localhost Bluetooth: HCI USB driver ver 2.4
Jan 3 13:47:45 localhost hci_usb: probe of 2-2:1.2 failed with error -5
Jan 3 13:47:45 localhost drivers/usb/core/usb.c: registered new driver
hci_usb
Jan 3 13:47:45 localhost hcid[4695]: HCI dev 0 registered
Jan 3 13:47:45 localhost hci_usb_isoc_rx_submit: hci0 isoc rx submit failed
urb ccbbfc14 err -22
Jan 3 13:47:45 localhost hci_usb_isoc_rx_submit: hci0 isoc rx submit failed
urb ccbbfc14 err -22
Jan 3 13:47:45 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:45 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 18 ret -110
Jan 3 13:47:45 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:45 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 18 ret -110
Jan 3 13:47:45 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:45 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 193 ret -110
Jan 3 13:47:45 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:45 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 18 ret -110
[......]
Jan 3 13:47:56 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:56 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 193 ret -110
Jan 3 13:47:56 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:56 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 193 ret -110
Jan 3 13:47:56 localhost usb 2-2: control timeout on ep0in
Jan 3 13:47:56 localhost usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2
rqt 128 rq 6 len 193 ret -110
Then I disconnect the adapter.
Jan 3 13:48:45 localhost usb 2-2: USB disconnect, address 2
Jan 3 13:48:45 localhost hcid[4695]: HCI dev 0 unregistered
When I reconnect it I've got the same errors.
On kernels 2.4.20-21-22-23 I've got the same errors but with
localhost usb_control/bulk_msg: timeout
and not
localhost usb 2-2: control timeout on ep0in
On the bluez mailinglist they said that this is probably a KNOW usb-uhci
problem but I can't find any solution or patch to it. I've tried unloading
and reloading the modules, using noapic and acpi=no, disabling the ehci but
nothing changed.
I've got a via chipset :-( and I've disabled the USB 2.0 capabilities (but
nothing changed too).
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
Subsystem: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00
[Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
Capabilities: [80] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: Unknown device 1695:3005
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: Unknown device 1695:3005
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00
[UHCI])
Subsystem: Unknown device 1695:3005
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
If this isn't the right place excuse me.
Bye!
--
Simone Gotti
<[EMAIL PROTECTED]>
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
