Hello and Thank you in advance.
I recently did a clean install of Fedora Core 1, which contains
Kernel-2.4.22-1.2135.nptlsmp. From that point USB modules load but
never seem to attach to attached devices. I am attempting to attach/usb
a Palm M505 with a USB Cradle.
AFTER pressing hotsync button on palm, I am waiting for the error
messages to get logged into syslog telling me which ttyUSBx port its
on. Those messages never appear and no connection to 'pilot-xfer -p
/dev/ttyUSB1 -L' ever happens.
I have researched this issue in some detail and now conclude that I need
help fixing something; because everything looks like it should be
working.
Here is some basic info on my system and a few key logs. Please point
me in the right direction to fix this is possible.
I have tried, switch MPS version from 1.4 to 1.1 in bios, booting with
nolacpi and noacpi, switch to uhci..., changing the order of ehci & ochi
in modules.conf, compiling as modules vs internal, switching physical
pci-card slots, enabling & disabling the amd768(MB usb ports)
[Hardware]
DUAL AMD 2400+ MPs, MSI K7D Master L-series Mainboard (AMD 760MPX)
Add-on NEC USB2.0 4port card, 1GB DDR2100, 2 WD40GB drives, NVidia 440MX
AGP, ATI TV-Wonder VE, SB 16 Sound Card.
[BIOS]
Award V1.8, MB usb & sound disabled, MPS 1.4 enabled
[Software]
Fedora Core 1, Kernel-2.4.22-1.2135nptl (custom smp config (no isdn...)
LM_Sensors & BTTV enabled (tvtime, fftv, and xosview)
ACPI enabled
pilot-link & gpilotd
[uname -a]
Linux skoona.scottfamily.net 2.4.22-1.2135.nptlskoona #20 SMP Sat Jan 3
20:53:32 EST 2004 i686 athlon i386 GNU/Linux
[Modules.conf]
alias eth0 e100
alias char-major-89 i2c-isa
alias char-major-195 nvidia
alias char-major-81 bttv
options bttv card=64 tuner=17 radio=0 automute=1 pll=1 gbuffers=32
alias char-major-188 usb-ohci
alias usb usb-ohci
alias usb-controller ehci-hcd
alias usb-controller1 usb-ohci
post-install usb modprobe usbserial
post-install usb modprobe visor
options visor debug=1
options usbserial vendor=0x0830 product=0x0002 debug=1
alias sound-slot-0 es1371
[System Logs (usb relevant msgs)]
Jan 5 11:54:27 skoona kernel: usb.c: registered new driver usbdevfs
Jan 5 11:54:27 skoona kernel: usb.c: registered new driver hub
Jan 5 11:54:27 skoona kernel: ehci_hcd 02:05.2: NEC Corporation USB 2.0
Jan 5 11:54:27 skoona kernel: ehci_hcd 02:05.2: irq 19, pci mem
f8850000
Jan 5 11:54:27 skoona kernel: usb.c: new USB bus registered, assigned
bus number 1
Jan 5 11:54:27 skoona kernel: ehci_hcd 02:05.2: USB 2.0 enabled, EHCI
0.95, driver 2003-Jun-19/2.4
Jan 5 11:54:28 skoona kernel: Manufacturer: Linux
2.4.22-1.2135.nptlskoona ehci_hcd
Jan 5 11:54:28 skoona kernel: Product: NEC Corporation USB 2.0
Jan 5 11:54:28 skoona kernel: SerialNumber: 02:05.2
Jan 5 11:54:28 skoona kernel: hub.c: USB hub found
Jan 5 11:54:28 skoona kernel: hub.c: 5 ports detected
Jan 5 11:54:28 skoona kernel: usb-ohci.c: USB OHCI at membase
0xf8859000, IRQ 17
Jan 5 11:54:28 skoona kernel: usb-ohci.c: usb-02:05.0, NEC Corporation
USB
Jan 5 11:54:28 skoona kernel: usb.c: new USB bus registered, assigned
bus number 2
Jan 5 11:54:28 skoona kernel: Product: USB OHCI Root Hub
Jan 5 11:54:28 skoona kernel: SerialNumber: f8859000
Jan 5 11:54:28 skoona kernel: hub.c: USB hub found
Jan 5 11:54:28 skoona kernel: hub.c: 3 ports detected
Jan 5 11:54:28 skoona kernel: usb-ohci.c: USB OHCI at membase
0xf885b000, IRQ 18
Jan 5 11:54:28 skoona kernel: usb-ohci.c: usb-02:05.1, NEC Corporation
USB (#2)
Jan 5 11:54:28 skoona kernel: usb.c: new USB bus registered, assigned
bus number 3
Jan 5 11:54:28 skoona kernel: Product: USB OHCI Root Hub
Jan 5 11:54:28 skoona kernel: SerialNumber: f885b000
Jan 5 11:54:28 skoona kernel: hub.c: USB hub found
Jan 5 11:54:28 skoona kernel: hub.c: 2 ports detected
Jan 5 11:54:28 skoona kernel: usb.c: registered new driver hiddev
Jan 5 11:54:28 skoona kernel: usb.c: registered new driver hid
Jan 5 11:54:28 skoona kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <[EMAIL PROTECTED]>
Jan 5 11:54:28 skoona kernel: hid-core.c: USB HID support drivers
[Lspci output]
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
System Controller (rev 20)
Flags: bus master, 66Mhz, medium devsel, latency 64
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Memory at f0100000 (32-bit, prefetchable) [size=4K]
I/O ports at e400 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P]
AGP Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: ec000000-edffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev
05)
Flags: bus master, 66Mhz, medium devsel, latency 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
(rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Flags: bus master, medium devsel, latency 64
I/O ports at e000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev
03)
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
Flags: medium devsel
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev
05) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ee000000-efffffff
Prefetchable memory behind bridge: f0000000-f00fffff
01:05.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX
440] (rev a3) (prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 17
Memory at ec000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e0000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
02:04.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 04)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 16
I/O ports at d000 [size=64]
Capabilities: [dc] Power Management version 2
02:05.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9516
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at ef022000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
02:05.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9516
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at ef023000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
02:05.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20
[EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 9516
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at ef020000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
02:06.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
Subsystem: ATI Technologies Inc: Unknown device 0003
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at f0000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
02:06.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
Subsystem: ATI Technologies Inc TV-Wonder/VE
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at f0001000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
02:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100]
(rev 10)
Subsystem: IBM Ethernet Pro/100 S
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at ef021000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=64]
Memory at ef000000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
[/Proc/bus/usb/devices & drivers]
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f8867000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f8865000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.22-1.2135.nptlskoona ehci_hcd
S: Product=NEC Corporation USB 2.0
S: SerialNumber=02:05.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
...
usbdevfs
hub
serial
96-111: hiddev
hid
[/etc/mtab]
/dev/hda3 / ext3 rw 0 0
none /proc proc rw 0 0
none /dev/pts devpts rw,gid=5,mode=620 0 0
usbdevfs /proc/bus/usb usbdevfs rw 0 0
/dev/hda1 /boot ext3 rw 0 0
/dev/hdd1 /opt ext3 rw 0 0
none /dev/shm tmpfs rw 0 0
/dev/hdc1 /var/local ext3 rw 0 0
[ls -l /dev/ttyUSB?]
crwxrwxrwx 1 root uucp 188, 0 Sep 15 08:40 /dev/ttyUSB0
crw------- 1 jscott uucp 188, 1 Sep 15 08:40 /dev/ttyUSB1
crwxrwxrwx 1 root uucp 188, 2 Sep 15 08:40 /dev/ttyUSB2
crwxrwxrwx 1 root uucp 188, 3 Sep 15 08:40 /dev/ttyUSB3
What should I do next ?
(one odd thing: software PowerDown stopped working with ACPI; I have to
press the power button to shut if the system physically off.)
(This is one of two machines (well diff video/sound cards), the other
runs XP pro with the USB card in the same PCI slot and the ohci
drivers.)
James,
-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
