to get bluetooth working with my p1 router box i had to:
- disable bios apm, apply failsafe defaults
- plug the vt6202 in the first pci slot, kernel stalls spurious if its in 3rd.
- use usb-uhci.o, uhci.o leads to bluetooth acl_tx_timeout after some minutes stalling the bluetooth dongle, reproducable on different machines.
so be it.
y tom
[EMAIL PROTECTED]:~# uname -r 2.4.24 [EMAIL PROTECTED]:~#
[EMAIL PROTECTED]:~# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT82C576 3V [Apollo Master] (rev 02)
Flags: bus master, fast devsel, latency 0
00:01.0 IDE interface: VIA Technologies, Inc. VT82C416MV (rev 04) (prog-if 8a [M
aster SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at 6000 [size=16]
00:08.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at 6100 [size=32]
Capabilities: [80] Power Management version 2
00:08.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at 6200 [size=32]
Capabilities: [80] Power Management version 2
00:08.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if 20 [EHC
I])
Subsystem: VIA Technologies, Inc. (Wrong ID): Unknown device 1234
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at f0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at 6300 [size=256]
Memory at f0001000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
Subsystem: Compex FN22-3(A) LinxPRO Ethernet Adapter
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at 6400 [size=256]
Memory at f0002000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [50] Power Management version 2
[EMAIL PROTECTED]:~#
[EMAIL PROTECTED]:~# lsmod
Module Size Used by Not tainted
bnep 10068 2 (autoclean)
l2cap 18572 4 (autoclean) [bnep]
ipt_TOS 952 3 (autoclean)
iptable_mangle 2072 1 (autoclean)
ipt_REJECT 3192 1 (autoclean)
ipt_TCPMSS 2360 1 (autoclean)
ipt_MASQUERADE 1368 2 (autoclean)
iptable_nat 17784 1 (autoclean) [ipt_MASQUERADE]
ipt_state 536 7 (autoclean)
ip_conntrack 22536 2 (autoclean) [ipt_MASQUERADE iptable_nat ipt_st
ate]
ipt_limit 952 1 (autoclean)
iptable_filter 1644 1 (autoclean)
ip_tables 12992 11 [ipt_TOS iptable_mangle ipt_REJECT ipt_TCPMSS
ipt_MASQUERADE iptable_nat ipt_state ipt_limit iptable_filter]
ppp_synctty 6496 0 (unused)
ppp_async 7968 1
ppp_generic 19296 3 [ppp_synctty ppp_async]
slhc 5120 0 [ppp_generic]
nfsd 68016 8
lockd 48720 1 [nfsd]
sunrpc 71420 1 [nfsd lockd]
hci_usb 7420 1
bluez 34564 3 [bnep l2cap hci_usb]
usb-uhci 23212 0 (unused)
8139too 14152 2
mii 2432 0 [8139too]
crc32 2912 0 [bnep 8139too]
ide-scsi 9552 0
[EMAIL PROTECTED]:~#
[EMAIL PROTECTED]:~# lsusb Unknown line at line 1809 Duplicate HUT Usage Spec at line 2650 Bus 002 Device 001: ID 0000:0000 Virtual Hub Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio Ltd. Bus 001 Device 001: ID 0000:0000 Virtual Hub [EMAIL PROTECTED]:~#
[EMAIL PROTECTED]:~# cat /proc/bus/usb/devices T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 23/900 us ( 3%), #Int= 1, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=6200 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a12 ProdID=0001 Rev= 5.25 C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none) T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=6100 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms [EMAIL PROTECTED]:~#
------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
