They should use different device names. What problem do you see? On Wed, 7 Jan 2004, steve wrote:
> Hello, I hope someone here can help with this problem. It's either not > possible to do this, or I'm missing something about configuration. > > When I set up USB mass storage in my kernel, I already had scsi emulation > enabled for an IDE cd writer, but the abilty to mount one device seems to > come at the expense of mounting the other. > > When I got the usb sd reader to get a scsi device, the cd writer couldn't and > vice-versa. > > Everything seems to be getting recognized by the kernel, but I can't get both > to get a device name (or I can't find it). Kernel is 2.4.22. > > Thanks for any input - relevant info below. Sorry, this is long - it's > kernel config , relevant logging from dmesg and kern.log, and the output of > cdrecord -scanbus. > > Thanks again, > Steve > > kernel config: > CONFIG_HOTPLUG=y > # ATA/IDE/MFM/RLL support > # > CONFIG_IDE=y > > # > # IDE, ATA and ATAPI Block devices > # > CONFIG_BLK_DEV_IDE=y > # Please see Documentation/ide.txt for help/info on IDE drives > # > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_HD is not set > CONFIG_BLK_DEV_IDEDISK=y > # CONFIG_IDEDISK_MULTI_MODE is not set > # CONFIG_IDEDISK_STROKE is not set > # CONFIG_BLK_DEV_IDECS is not set > # CONFIG_BLK_DEV_IDECD is not set > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > CONFIG_BLK_DEV_IDESCSI=y > # CONFIG_IDE_TASK_IOCTL is not set > # SCSI support > # > CONFIG_SCSI=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > # CONFIG_BLK_DEV_SD is not set > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > CONFIG_BLK_DEV_SR=y > CONFIG_BLK_DEV_SR_VENDOR=y > CONFIG_SR_EXTRA_DEVS=2 > # CONFIG_CHR_DEV_SCH is not set > CONFIG_CHR_DEV_SG=y > > # > # Some SCSI devices (e.g. CD jukebox) support multiple LUNs > # > CONFIG_SCSI_DEBUG_QUEUES=y > CONFIG_SCSI_MULTI_LUN=y > CONFIG_SCSI_CONSTANTS=y > # CONFIG_SCSI_LOGGING is not set > > # > # SCSI low-level drivers > # > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_7000FASST is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AHA152X is not set > # CONFIG_SCSI_AHA1542 is not set > # CONFIG_SCSI_AHA1740 is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC7XXX_OLD is not set > # CONFIG_SCSI_DPT_I2O is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_IN2000 is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_MEGARAID is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_CPQFCTS is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_DTC3280 is not set > # CONFIG_SCSI_EATA is not set > # CONFIG_SCSI_EATA_DMA is not set > # CONFIG_SCSI_EATA_PIO is not set > # CONFIG_SCSI_FUTURE_DOMAIN is not set > # CONFIG_SCSI_GDTH is not set > # CONFIG_SCSI_GENERIC_NCR5380 is not set > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_NCR53C406A is not set > # CONFIG_SCSI_NCR53C7xx is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_NCR53C8XX is not set > # CONFIG_SCSI_SYM53C8XX is not set > # CONFIG_SCSI_PAS16 is not set > # CONFIG_SCSI_PCI2000 is not set > # CONFIG_SCSI_PCI2220I is not set > # CONFIG_SCSI_PSI240I is not set > # CONFIG_SCSI_QLOGIC_FAS is not set > # CONFIG_SCSI_QLOGIC_ISP is not set > # CONFIG_SCSI_QLOGIC_FC is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_SEAGATE is not set > # CONFIG_SCSI_SIM710 is not set > # CONFIG_SCSI_SYM53C416 is not set > # CONFIG_SCSI_DC390T is not set > # CONFIG_SCSI_T128 is not set > # CONFIG_SCSI_U14_34F is not set > # CONFIG_SCSI_ULTRASTOR is not set > # CONFIG_SCSI_NSP32 is not set > # CONFIG_SCSI_DEBUG is not set > > # USB support > # > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > > # > # USB Host Controller Drivers > # > # CONFIG_USB_EHCI_HCD is not set > CONFIG_USB_UHCI_ALT=y > # CONFIG_USB_OHCI is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_AUDIO is not set > # CONFIG_USB_BLUETOOTH is not set > # CONFIG_USB_MIDI is not set > CONFIG_USB_STORAGE=y > CONFIG_USB_STORAGE_DEBUG=y > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_HP8200e is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > > bash-2.03# dmesg | grep usb > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 7c c8 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x6 Trg 0 LUN 0 L 36 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 36 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x6 R 0 Stat 0x0 > usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 3f c4 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x7 Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x7 R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0x8 Trg 0 LUN 0 L 18 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x8 R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0 > usb-storage: Not Ready: media not present > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 8c ca 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x9 Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x9 R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0xa Trg 0 LUN 0 L 18 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xa R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0 > usb-storage: Not Ready: media not present > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 8c ca 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0xb Trg 0 LUN 0 L 36 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 36 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xb R 0 Stat 0x0 > usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 80 c1 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0xc Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xc R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0xd Trg 0 LUN 0 L 18 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xd R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0 > usb-storage: Not Ready: media not present > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 6e c8 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0xe Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xe R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0xf Trg 0 LUN 0 L 18 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0xf R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0 > usb-storage: Not Ready: media not present > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 6e c8 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x10 Trg 0 LUN 0 L 36 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 36 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x10 R 0 Stat 0x0 > usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb.c: USB disconnect on device 00:07.2-1 address 2 > usb-storage: storage_disconnect() called > usb-storage: -- releasing main URB > usb-storage: -- usb_unlink_urb() returned -19 > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 73 > usb-storage: Array length appears to be: 75 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xcbfefd14 Out: 0xcbfefd00 Int: 0x00000000 > (Period 0) > usb-storage: Found existing GUID 058f93300000000000000000 > usb.c: USB disconnect on device 00:07.2-1 address 3 > usb-storage: storage_disconnect() called > usb-storage: -- releasing main URB > usb-storage: -- usb_unlink_urb() returned -19 > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 73 > usb-storage: Array length appears to be: 75 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xc4808a94 Out: 0xc4808a80 Int: 0x00000000 > (Period 0) > usb-storage: New GUID 04da23720000000000000000 > usb-storage: GetMaxLUN command result is 1, data is 0 > usb-storage: Transport: Bulk > usb-storage: Protocol: Transparent SCSI > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 ff 00 00 00 1a 08 00 00 > usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 255 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255 > usb-storage: Bulk data transfer result 0x1 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad LUN (0/1) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (1/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (2/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (3/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (4/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (5/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (6/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Bad target number (7/0) > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Request is for removed device > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Request is for removed device > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Request is for removed device > usb-storage: Faking INQUIRY command for disconnected device > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 00 00 d4 fe d3 c5 > usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x2 R 0 Stat 0x1 > usb-storage: -- transport indicates command failure > usb-storage: Issuing auto-REQUEST_SENSE > usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN 0 L 18 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 18 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x3 R 0 Stat 0x0 > usb-storage: -- Result from auto-sense is 0 > usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 > usb-storage: Unit Attention: not ready to ready transition > usb-storage: scsi cmd done, result=0x2 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 97 c7 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x4 Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x4 R 0 Stat 0x0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 97 c7 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x5 Trg 0 LUN 0 L 0 F 0 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x5 R 0 Stat 0x0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb-storage: queuecommand() called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 97 c7 00 00 00 00 > usb-storage: Bulk command S 0x43425355 T 0x6 Trg 0 LUN 0 L 36 F 128 CL 6 > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_transfer_partial(): xfer 36 bytes > usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36 > usb-storage: usb_stor_transfer_partial(): transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: Bulk status result = 0 > usb-storage: Bulk status Sig 0x53425355 T 0x6 R 0 Stat 0x0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: *** thread sleeping. > usb.c: USB disconnect on device 00:07.2-1 address 4 > usb-storage: storage_disconnect() called > usb-storage: -- releasing main URB > usb-storage: -- usb_unlink_urb() returned -19 > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 73 > usb-storage: Array length appears to be: 75 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xcbfefd14 Out: 0xcbfefd00 Int: 0x00000000 > (Period 0) > usb-storage: Found existing GUID 058f93300000000000000000 > usb.c: USB disconnect on device 00:07.2-1 address 5 > usb-storage: storage_disconnect() called > usb-storage: -- releasing main URB > usb-storage: -- usb_unlink_urb() returned -19 > usb-storage: act_altsettting is 0 > usb-storage: id_index calculated to be: 73 > usb-storage: Array length appears to be: 75 > usb-storage: USB Mass Storage device detected > usb-storage: Endpoints: In: 0xcbfefd14 Out: 0xcbfefd00 Int: 0x00000000 > (Period 0) > usb-storage: Found existing GUID 058f93300000000000000000 > > bash-2.03# dmesg | grep scsi > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x0 > scsi2 : SCSI emulation for USB Mass Storage devices > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x2 > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x0 > usb-storage: scsi cmd done, result=0x0 > > bash-2.03# cdrecord -scanbus > Cdrecord 1.11a34 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > Linux sg driver version: 3.1.25 > Using libscg version 'schily-0.6' > scsibus0: > 0,0,0 0) 'LITE-ON ' 'LTR-48246S ' 'SS06' Removable CD-ROM > cdrecord: Warning: controller returns wrong size for CD capabilities page. > 0,1,0 1) 'CD-ROM ' 'Drive/F5A ' 'B1.4' Removable CD-ROM > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > scsibus1: > 1,0,0 100) 'Generic ' 'USB SD Reader ' '2.00' Removable Disk > 1,1,0 101) * > 1,2,0 102) * > 1,3,0 103) * > 1,4,0 104) * > 1,5,0 105) * > 1,6,0 106) * > 1,7,0 107) * > scsibus2: > 2,0,0 200) '' '' '' Removable not present Disk > 2,1,0 201) * > 2,2,0 202) * > 2,3,0 203) * > 2,4,0 204) * > 2,5,0 205) * > 2,6,0 206) * > 2,7,0 207) * > > Relevant kern.log: > (lilo mods for cdwriter to keep ide driver from grabbing CDs) > Jan 7 01:03:37 debian kernel: Kernel command line: auto BOOT_IMAGE=Linux ro > root=301 BOOT_FILE=/vmlinuz hdb=ide-scsi hdd=ide-scsi > Jan 7 01:03:37 debian kernel: ide_setup: hdb=ide-scsi > Jan 7 01:03:37 debian kernel: ide_setup: hdd=ide-scsi > > (IDE scsi drive assignment) > Jan 7 01:03:37 debian kernel: Uniform Multi-Platform E-IDE driver Revision: > 7.00beta4-2.4 > Jan 7 01:03:37 debian kernel: ide: Assuming 33MHz system bus speed for PIO > modes; override with idebus=xx > Jan 7 01:03:37 debian kernel: PDC20269: IDE controller at PCI slot 00:09.0 > Jan 7 01:03:37 debian kernel: PCI: Found IRQ 11 for device 00:09.0 > Jan 7 01:03:37 debian kernel: PDC20269: chipset revision 2 > Jan 7 01:03:37 debian kernel: PDC20269: not 100%% native mode: will probe > irqs later > Jan 7 01:03:37 debian kernel: ide2: BM-DMA at 0xdc00-0xdc07, BIOS > settings: hde:pio, hdf:pio > Jan 7 01:03:37 debian kernel: ide3: BM-DMA at 0xdc08-0xdc0f, BIOS > settings: hdg:pio, hdh:pio > Jan 7 01:03:37 debian kernel: hda: Maxtor 51536H2, ATA DISK drive > Jan 7 01:03:37 debian kernel: hdb: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive > Jan 7 01:03:37 debian kernel: hdc: MAXTOR 6L080J4, ATA DISK drive > Jan 7 01:03:37 debian kernel: hdd: CD-ROM Drive/F5A, ATAPI CD/DVD-ROM drive > Jan 7 01:03:37 debian kernel: hdf: SAMSUNG SHD-30560A (APOLLO-5) SSI, ATA > DISK drive > Jan 7 01:03:37 debian kernel: blk: queue c03d4c40, I/O limit 4095Mb (mask > 0xffffffff) > Jan 7 01:03:37 debian kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Jan 7 01:03:37 debian kernel: ide1 at 0x170-0x177,0x376 on irq 15 > Jan 7 01:03:37 debian kernel: ide2 at 0xcc00-0xcc07,0xd002 on irq 11 > Jan 7 01:03:37 debian kernel: hda: attached ide-disk driver. > Jan 7 01:03:37 debian kernel: hda: 30015216 sectors (15368 MB) w/2048KiB > Cache, CHS=1868/255/63 > Jan 7 01:03:37 debian kernel: hdc: attached ide-disk driver. > Jan 7 01:03:37 debian kernel: hdc: 156355584 sectors (80054 MB) w/1819KiB > Cache, CHS=155114/16/63 > Jan 7 01:03:37 debian kernel: hdf: attached ide-disk driver. > Jan 7 01:03:37 debian kernel: hdf: 1096048 sectors (561 MB) w/128KiB Cache, > CHS=1087/16/63, DMA > Jan 7 01:03:37 debian kernel: hdb: attached ide-scsi driver. > Jan 7 01:03:37 debian kernel: hdd: attached ide-scsi driver. > Jan 7 01:03:37 debian kernel: Partition check: > Jan 7 01:03:37 debian kernel: hda: hda1 hda2 hda3 > Jan 7 01:03:37 debian kernel: hdc: hdc1 hdc2 hdc3 > Jan 7 01:03:37 debian kernel: hdf: [PTBL] [543/32/63] hdf1 hdf2 < hdf5 > > Jan 7 01:03:37 debian kernel: SCSI subsystem driver Revision: 1.00 > Jan 7 01:03:37 debian kernel: scsi0 : SCSI host adapter emulation for IDE > ATAPI devices > Jan 7 01:03:37 debian kernel: Vendor: LITE-ON Model: LTR-48246S > Rev: SS06 > Jan 7 01:03:37 debian kernel: Type: CD-ROM > ANSI SCSI revision: 02 > Jan 7 01:03:37 debian kernel: Vendor: CD-ROM Model: Drive/F5A > Rev: B1.4 > Jan 7 01:03:37 debian kernel: Type: CD-ROM > ANSI SCSI revision: 02 > Jan 7 01:03:37 debian kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, > id 0, lun 0 > Jan 7 01:03:37 debian kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, > id 1, lun 0 > Jan 7 01:03:37 debian kernel: sr0: scsi3-mmc drive: 12x/12x writer cd/rw > xa/form2 cdda tray > Jan 7 01:03:37 debian kernel: Uniform CD-ROM driver Revision: 3.12 > Jan 7 01:03:37 debian kernel: sr1: scsi3-mmc drive: 24x/48x cd/rw xa/form2 > cdda tray > > (kern.log on boot when it first picked up usb) > Jan 7 01:03:37 debian kernel: Linux Kernel Card Services 3.1.22 > Jan 7 01:03:37 debian kernel: options: [pci] [cardbus] [pm] > Jan 7 01:03:37 debian kernel: usb.c: registered new driver usbdevfs > Jan 7 01:03:37 debian kernel: usb.c: registered new driver hub > Jan 7 01:03:37 debian kernel: host/uhci.c: USB Universal Host Controller > Interface driver v1.1 > Jan 7 01:03:37 debian kernel: PCI: Found IRQ 5 for device 00:07.2 > Jan 7 01:03:37 debian kernel: PCI: Sharing IRQ 5 with 00:07.3 > Jan 7 01:03:37 debian kernel: host/uhci.c: USB UHCI at I/O 0xb400, IRQ 5 > Jan 7 01:03:37 debian kernel: usb.c: new USB bus registered, assigned bus > number 1 > Jan 7 01:03:37 debian kernel: hub.c: USB hub found > Jan 7 01:03:37 debian kernel: hub.c: 2 ports detected > Jan 7 01:03:37 debian kernel: PCI: Found IRQ 5 for device 00:07.3 > Jan 7 01:03:37 debian kernel: PCI: Sharing IRQ 5 with 00:07.2 > Jan 7 01:03:37 debian kernel: host/uhci.c: USB UHCI at I/O 0xb800, IRQ 5 > Jan 7 01:03:37 debian kernel: usb.c: new USB bus registered, assigned bus > number 2 > Jan 7 01:03:37 debian kernel: hub.c: USB hub found > Jan 7 01:03:37 debian kernel: hub.c: 2 ports detected > Jan 7 01:03:37 debian kernel: Initializing USB Mass Storage driver... > Jan 7 01:03:37 debian kernel: usb.c: registered new driver usb-storage > Jan 7 01:03:37 debian kernel: USB Mass Storage support registered. > Jan 7 01:03:37 debian kernel: hub.c: new USB device 00:07.2-1, assigned > address 2 > Jan 7 01:03:37 debian kernel: usb-storage: USB Mass Storage device detected > Jan 7 01:03:37 debian kernel: usb-storage: Endpoints: In: 0xcbfefd14 Out: > 0xcbfefd00 Int: 0x00000000 (Period 0) > Jan 7 01:03:37 debian kernel: usb-storage: New GUID 058f93300000000000000000 > Jan 7 01:03:37 debian kernel: usb-storage: GetMaxLUN command result is -32, > data is 128 > Jan 7 01:03:37 debian kernel: usb-storage: clearing endpoint halt for pipe > 0x80000280 > Jan 7 01:03:37 debian kernel: usb-storage: Transport: Bulk > Jan 7 01:03:37 debian kernel: usb-storage: Protocol: Transparent SCSI > Jan 7 01:03:37 debian kernel: usb-storage: *** thread sleeping. > Jan 7 01:03:37 debian kernel: scsi1 : SCSI emulation for USB Mass Storage > devices > Jan 7 01:03:37 debian kernel: usb-storage: queuecommand() called > Jan 7 01:03:37 debian kernel: usb-storage: *** thread awakened. > Jan 7 01:03:37 debian kernel: usb-storage: Command INQUIRY (6 bytes) > Jan 7 01:03:37 debian kernel: usb-storage: 12 00 00 00 ff 00 00 00 2d 00 00 > 00 > Jan 7 01:03:37 debian kernel: usb-storage: Bulk command S 0x43425355 T 0x1 > Trg 0 LUN 0 L 255 F 128 CL 6 > Jan 7 01:03:37 debian kernel: usb-storage: Bulk command transfer result=0 > Jan 7 01:03:37 debian kernel: usb-storage: usb_stor_transfer_partial(): xfer > 255 bytes > Jan 7 01:03:37 debian kernel: usb-storage: usb_stor_bulk_msg() returned 0 > xferred 36/255 > Jan 7 01:03:37 debian kernel: usb-storage: Bulk data transfer result 0x1 > Jan 7 01:03:37 debian kernel: usb-storage: Attempting to get CSW... > Jan 7 01:03:37 debian kernel: usb-storage: clearing endpoint halt for pipe > 0xc0010280 > Jan 7 01:03:37 debian kernel: usb-storage: usb_stor_clear_halt: result=0 > Jan 7 01:03:37 debian kernel: usb-storage: Attempting to get CSW (2nd try)... > Jan 7 01:03:37 debian kernel: usb-storage: Bulk status result = 0 > Jan 7 01:03:37 debian kernel: usb-storage: Bulk status Sig 0x53425355 T 0x1 > R 219 Stat 0x0 > Jan 7 01:03:37 debian kernel: usb-storage: Fixing INQUIRY data to show SCSI > rev 2 - was 0 > Jan 7 01:03:37 debian kernel: usb-storage: scsi cmd done, result=0x0 > Jan 7 01:03:37 debian kernel: usb-storage: *** thread sleeping. > Jan 7 01:03:37 debian kernel: host/uhci.c: uhci_transfer_result: called for > URB cbf80d40 not in flight? > Jan 7 01:03:37 debian kernel: Vendor: Generic Model: USB SD Reader > Rev: 2.00 > Jan 7 01:03:37 debian kernel: Type: Direct-Access > ANSI SCSI revision: 02 > Jan 7 01:03:37 debian kernel: usb-storage: queuecommand() called > Jan 7 01:03:37 debian kernel: usb-storage: *** thread awakened. > Jan 7 01:03:37 debian kernel: usb-storage: Bad LUN (0/1) > Jan 7 01:03:37 debian kernel: usb-storage: *** thread sleeping. > Jan 7 01:03:37 debian kernel: usb-storage: queuecommand() called > Jan 7 01:03:37 debian kernel: usb-storage: *** thread awakened. > Jan 7 01:03:37 debian kernel: usb-storage: Bad target number (1/0) > Jan 7 01:03:37 debian kernel: usb-storage: *** thread sleeping. > Jan 7 01:03:37 debian kernel: usb-storage: queuecommand() called > Jan 7 01:03:37 debian kernel: usb-storage: *** thread awakened. > Jan 7 01:03:37 debian kernel: usb-storage: Bad target number (2/0) > Jan 7 01:03:37 debian kernel: usb-storage: *** thread sleeping. > > etc. > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Perforce Software. > Perforce is the Fast Software Configuration Management System offering > advanced branching capabilities and atomic changes on 50+ platforms. > Free Eval! http://www.perforce.com/perforce/loadprog.html > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
