Jan 17 11:22:31 [kernel] Linux version 2.6.0 (root@yoda) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #4 Mon Dec 29 13:02:07 CET 2003
Jan 17 11:24:04 [kernel] drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
Jan 17 11:24:04 [kernel] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.0: irq 10, io base 00008c80
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jan 17 11:24:04 [kernel] drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.0: root hub device address 1
Jan 17 11:24:04 [kernel] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
Jan 17 11:24:04 [kernel] drivers/usb/core/message.c: USB device number 1 default language ID 0x409
Jan 17 11:24:04 [kernel] usb usb1: Product: UHCI Host Controller
Jan 17 11:24:04 [kernel] usb usb1: Manufacturer: Linux 2.6.0 uhci_hcd
Jan 17 11:24:04 [kernel] usb usb1: SerialNumber: 0000:00:1d.0
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:04 [kernel] usb usb1: registering 1-0:1.0 (config #1, interface 0)
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:04 [kernel] hub 1-0:1.0: usb_probe_interface
Jan 17 11:24:04 [kernel] hub 1-0:1.0: usb_probe_interface - got id
Jan 17 11:24:04 [kernel] hub 1-0:1.0: USB hub found
Jan 17 11:24:04 [kernel] hub 1-0:1.0: 2 ports detected
Jan 17 11:24:04 [kernel] hub 1-0:1.0: standalone hub
Jan 17 11:24:04 [kernel] hub 1-0:1.0: ganged power switching
Jan 17 11:24:04 [kernel] hub 1-0:1.0: global over-current protection
Jan 17 11:24:04 [kernel] hub 1-0:1.0: Port indicators are not supported
Jan 17 11:24:04 [kernel] hub 1-0:1.0: power on to power good time: 2ms
Jan 17 11:24:04 [kernel] hub 1-0:1.0: hub controller current requirement: 0mA
Jan 17 11:24:04 [kernel] hub 1-0:1.0: local power source is good
Jan 17 11:24:04 [kernel] hub 1-0:1.0: no over-current condition exists
Jan 17 11:24:04 [kernel] hub 1-0:1.0: enabling power on all ports
Jan 17 11:24:04 [kernel] PCI: Found IRQ 11 for device 0000:00:1d.1
Jan 17 11:24:04 [kernel] PCI: Sharing IRQ 11 with 0000:02:05.0
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 17 11:24:04 [kernel] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.1: irq 11, io base 00008ca0
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jan 17 11:24:04 [kernel] drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.1: root hub device address 1
Jan 17 11:24:04 [kernel] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
Jan 17 11:24:04 [kernel] drivers/usb/core/message.c: USB device number 1 default language ID 0x409
Jan 17 11:24:04 [kernel] usb usb2: Product: UHCI Host Controller
Jan 17 11:24:04 [kernel] usb usb2: Manufacturer: Linux 2.6.0 uhci_hcd
Jan 17 11:24:04 [kernel] usb usb2: SerialNumber: 0000:00:1d.1
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:04 [kernel] usb usb2: registering 2-0:1.0 (config #1, interface 0)
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:04 [kernel] hub 2-0:1.0: usb_probe_interface
Jan 17 11:24:04 [kernel] hub 2-0:1.0: usb_probe_interface - got id
Jan 17 11:24:04 [kernel] hub 2-0:1.0: USB hub found
Jan 17 11:24:04 [kernel] hub 2-0:1.0: 2 ports detected
Jan 17 11:24:04 [kernel] hub 2-0:1.0: standalone hub
Jan 17 11:24:04 [kernel] hub 2-0:1.0: ganged power switching
Jan 17 11:24:04 [kernel] hub 2-0:1.0: global over-current protection
Jan 17 11:24:04 [kernel] hub 2-0:1.0: Port indicators are not supported
Jan 17 11:24:04 [kernel] hub 2-0:1.0: power on to power good time: 2ms
Jan 17 11:24:04 [kernel] hub 2-0:1.0: hub controller current requirement: 0mA
Jan 17 11:24:04 [kernel] hub 2-0:1.0: local power source is good
Jan 17 11:24:04 [kernel] hub 2-0:1.0: no over-current condition exists
Jan 17 11:24:04 [kernel] hub 2-0:1.0: enabling power on all ports
Jan 17 11:24:04 [kernel] PCI: Found IRQ 11 for device 0000:00:1d.2
Jan 17 11:24:04 [kernel] PCI: Sharing IRQ 11 with 0000:00:1f.1
Jan 17 11:24:04 [kernel] PCI: Sharing IRQ 11 with 0000:02:03.1
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 17 11:24:04 [kernel] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.2: irq 11, io base 00008cc0
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jan 17 11:24:04 [kernel] drivers/usb/host/uhci-hcd.c: detected 2 ports
Jan 17 11:24:04 [kernel] uhci_hcd 0000:00:1d.2: root hub device address 1
Jan 17 11:24:04 [kernel] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
Jan 17 11:24:04 [kernel] drivers/usb/core/message.c: USB device number 1 default language ID 0x409
Jan 17 11:24:04 [kernel] usb usb3: Product: UHCI Host Controller
Jan 17 11:24:04 [kernel] usb usb3: Manufacturer: Linux 2.6.0 uhci_hcd
Jan 17 11:24:04 [kernel] usb usb3: SerialNumber: 0000:00:1d.2
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:04 [kernel] usb usb3: registering 3-0:1.0 (config #1, interface 0)
Jan 17 11:24:04 [kernel] drivers/usb/core/usb.c: usb_hotplug
Jan 17 11:24:05 [kernel] hub 3-0:1.0: usb_probe_interface
Jan 17 11:24:05 [kernel] hub 3-0:1.0: usb_probe_interface - got id
Jan 17 11:24:05 [kernel] hub 3-0:1.0: USB hub found
Jan 17 11:24:05 [kernel] hub 3-0:1.0: 2 ports detected
Jan 17 11:24:05 [kernel] hub 3-0:1.0: standalone hub
Jan 17 11:24:05 [kernel] hub 3-0:1.0: ganged power switching
Jan 17 11:24:05 [kernel] hub 3-0:1.0: global over-current protection
Jan 17 11:24:05 [kernel] hub 3-0:1.0: Port indicators are not supported
Jan 17 11:24:05 [kernel] hub 3-0:1.0: power on to power good time: 2ms
Jan 17 11:24:05 [kernel] hub 3-0:1.0: hub controller current requirement: 0mA
Jan 17 11:24:05 [kernel] hub 3-0:1.0: local power source is good
Jan 17 11:24:05 [kernel] hub 3-0:1.0: no over-current condition exists
Jan 17 11:24:05 [kernel] hub 3-0:1.0: enabling power on all ports
Jan 17 11:24:06 [kernel] drivers/usb/host/uhci-hcd.c: 8c80: suspend_hc
Jan 17 11:24:06 [kernel] drivers/usb/host/uhci-hcd.c: 8ca0: suspend_hc
Jan 17 11:24:07 [kernel] drivers/usb/host/uhci-hcd.c: 8cc0: suspend_hc