I have a Lexar RW018 Rev. C USB 2.0 multi-card reader (original firmware - no update required). Under Windows XP, all three "ports" of the device appear. However, under Linux 2.6.1, only one port appears, and sadly, it is not the one for my cards.
The RW018 Rev. A is listed at qbik.ch as working under Linux, with three SCSI drive letters allocated to it. Is there a tweak one can try to get the other drive letters to show?
Sincerely, Samuel Greenfeld
Information clippings: ----------------------
hub 1-4:1.0: new USB device on port 2, assigned address 5 scsi2 : SCSI emulation for USB Mass Storage devices Vendor: Lexar Model: Media Inc. SM/xD Rev: 009E Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 5
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05dc ProdID=b18d Rev= 1.00 S: Manufacturer=Lexar Media S: Product=Multi-Card Reader S: SerialNumber=20031215<additional numbers here> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
