hi all, i am a complete newbie in usb, so i need some help to understand whats going on.
...i have a compaq proliant server, with a pci usb-hub with 2 ports. ...i have a old logitech ps/2 mouseman. ...i connect this ps/2 mouseman to a usb-converter ...i plug it into the usb-port ...and nothing happens, mouse is not moving. have perhaps to say, that between mouse and proliant there is a ps/2 kvm-swich. nevertheless, my proliant seems to recognize something, because of the following errors: [EMAIL PROTECTED] log]# more messages | grep usb Feb 3 18:11:22 morpheus kernel: usb.c: registered new driver usbdevfs Feb 3 18:11:22 morpheus kernel: usb.c: registered new driver hub Feb 3 18:11:23 morpheus kernel: usb-uhci.c: $Revision: 1.275 $ time 13:16:59 Jan 7 2004 --* why??? i got on boot-time several error-messages about this module not to be loaded. also compaq uses as i read ohci instead Feb 3 18:11:23 morpheus kernel: usb-uhci.c: High bandwidth mode enabled Feb 3 18:11:23 morpheus kernel: usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! Feb 3 18:11:23 morpheus kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Feb 3 18:11:23 morpheus kernel: usb-ohci.c: USB OHCI at membase 0xd0893000, IRQ 5 Feb 3 18:11:23 morpheus kernel: usb-ohci.c: usb-01:0d.0, OPTi Inc. 82C861 Feb 3 18:11:23 morpheus kernel: usb.c: new USB bus registered, assigned bus number 1 Feb 3 18:11:23 morpheus kernel: usb.c: registered new driver hiddev Feb 3 18:11:23 morpheus kernel: usb.c: registered new driver hid Feb 3 18:11:24 morpheus kernel: usb.c: USB device not accepting new address=2 (error=-110) --* this is the mouse i think Feb 3 18:11:24 morpheus kernel: usb.c: USB device not accepting new address=3 (error=-110) --* this is the mouse too, i think... Feb 3 18:11:24 morpheus kernel: usb.c: USB device 4 (vend/prod 0x3f0/0x1411) is not claimed by any active driver. Feb 3 18:11:24 morpheus kernel: usb.c: registered new driver usbscanner Feb 3 18:11:24 morpheus kernel: usb.c: registered new driver usblp Feb 3 18:11:24 morpheus kernel: printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1411 Feb 3 18:11:26 morpheus kernel: usb-uhci.c: $Revision: 1.275 $ time 13:16:59 Jan 7 2004 Feb 3 18:11:26 morpheus kernel: usb-uhci.c: High bandwidth mode enabled Feb 3 18:11:26 morpheus kernel: usb-uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! Feb 3 18:11:26 morpheus kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ...and here some more diagnosis... ----* /sbin/lsmod: [EMAIL PROTECTED] log]# /sbin/lsmod Module Size Used by Not tainted ppdev 7116 0 (autoclean) soundcore 6468 0 (autoclean) parport_pc 18756 1 (autoclean) lp 8580 0 (autoclean) parport 37056 1 (autoclean) [ppdev parport_pc lp] autofs 12084 0 (autoclean) (unused) tlan 32220 1 floppy 57308 0 (autoclean) sg 35436 0 (autoclean) sr_mod 17400 0 (autoclean) microcode 4188 0 (autoclean) ide-scsi 12016 0 ide-cd 34432 0 cdrom 34592 0 [sr_mod ide-cd] printer 9376 0 scanner 11544 0 keybdev 2656 0 (unused) hid 23908 0 (unused) usb-ohci 21544 0 (unused) usbcore 78752 1 [printer scanner hid usb-ohci] mousedev 5268 2 (autoclean) input 5888 0 (autoclean) [keybdev hid mousedev] ext3 71716 2 jbd 51276 2 [ext3] sym53c8xx 67536 4 sd_mod 13388 8 scsi_mod 110248 5 [sg sr_mod ide-scsi sym53c8xx sd_mod] ----* /sbin/lsusb:[EMAIL PROTECTED] log]# /sbin/lsusb Bus 001 Device 001: ID 0000:0000 Bus 001 Device 004: ID 03f0:1411 Hewlett-Packard thx for any help getting my mouse working... Roger ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
