Hi All, I am running MDK 9.2, Kernel 2.4.22-26mdk on a Compaq Presario 2540EA.
Relevant lines from lspci output: 00:0b.0 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:0b.1 USB Controller: VIA Technologies, Inc. USB (rev 50) 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) here is the relevant line from the /etc/modules.conf file: alias usb-interface usb-uhci Here is dmesg output when I plug my 64Mb "Memory Bar" DiskOnKey: usb.c: registered new driver usbdevfs usb.c: registered new driver hub Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. i8253 count too high! resetting.. usb-uhci.c: $Revision: 1.275 $ time 11:21:11 Jan 7 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error hub.c: new USB device 00:0b.1-2, assigned address 2 scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Model: MEMORY BAR Rev: Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 sda : READ CAPACITY failed. sda : status = 1, message = 00, host = 0, driver = 08 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 2097144 I/O error: dev 08:00, sector 2097144 I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 ldm_validate_partition_table(): Disk read failed. I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 2 unable to read partition table WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 If I try to mount it, the Kernel panics.. Any ideas? Thanks, .:====================================================:. Amichai Rotman Short text-only e-mails: [EMAIL PROTECTED] UIN#: 6401746 Registered Linux User#: 201192 ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
