I am attempting to use an external usb 1.1 hard drive on Debian (Woody)
with kernel 2.4.24.  I have compiled the kernel with usb and scsii
support, but am unable to mount it from Debian.

However, I _can_ mount it (and read/write) using the SystemRescue CD (v
0.2.9).

Below are the dmesg (excerpts) and lsmod results from booting either
Debian and from the SystemRescue CD.  Hopefully, this will give someone
smarter than myself an idea of what might be going on.

Thanks,
Barry

--------------------------------------------------------------------
lsmod-Debian
------------

Module                  Size  Used by    Not tainted


lsmod-SystemRescue CD
---------------------

Module                  Size  Used by    Tainted: PF 
usb-storage            61248   0  (unused)
usb-ohci               17448   0  (unused)
tulip                  39008   0 
apm                     9212   0  (unused)
floppy                 48028   0  (autoclean)
tun                     4000   0  (unused)
strip                  18828   0  (unused)
slip                    5792   0  (unused)
nvnet                  26400   1  (initializing)
mii                     2192   0 
dummy                   1080   0  (unused)
defxx                  10996   0  (unused)
aironet4500_core       49272   0  (unused)
8390                    5728   0 
usbcore                56288   1  [usb-storage usb-ohci]
cloop                   8388   2 

-----------------------------------------------------------------------

dmesg - Debian
--------------

SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
es1371: version v0.32 time 17:29:13 Jan 31 2004
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage


dmesg - SystemRescue CD
-----------------------

SCSI subsystem driver Revision: 1.00
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xc4b1a000, IRQ 9
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:02.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xcaf/0x3a00) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: SAMSUNG   Model: SV4002H           Rev: QP10
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 20:33:48 Dec 22 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

---------------------------------------------------------------------


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to