Hi all, I frequently am unable to get my usb stuff up and running. I have 3 devices : Ipaq on USB, a USB Bluetooth dongle and a USB flash drive. non of them seem to work properly in those situations.
When I can get it to work all of them work. I have compiled the usb in debug and get the following results Can anybody have a look a this and perhaps throw some light on this ? Thanx Feb 8 15:53:18 buro kernel: klogd 1.4.1#13, log source = /proc/kmsg started. Feb 8 15:53:18 buro kernel: Inspecting /boot/System.map-2.6.2-rc1 Feb 8 15:53:18 buro kernel: Loaded 25333 symbols from /boot/System.map-2.6.2-rc1. Feb 8 15:53:18 buro kernel: Symbols match kernel version 2.6.2. Feb 8 15:53:18 buro kernel: No module symbols loaded - kernel modules not enabled. Feb 8 15:53:18 buro kernel: rror, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:18 buro kernel: hdb: No disk in drive Feb 8 15:53:18 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:19 buro kernel: hdb: No disk in drive Feb 8 15:53:19 buro kernel: kjournald starting. Commit interval 5 seconds Feb 8 15:53:19 buro kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Feb 8 15:53:19 buro kernel: EXT3 FS on dm-0, internal journal Feb 8 15:53:19 buro kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 8 15:53:19 buro kernel: kjournald starting. Commit interval 5 seconds Feb 8 15:53:19 buro kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended Feb 8 15:53:19 buro kernel: EXT3 FS on dm-1, internal journal Feb 8 15:53:19 buro kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 8 15:53:19 buro kernel: Adding 524280k swap on /swapfile. Priority:-1 extents:134 Feb 8 15:53:19 buro kernel: parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] Feb 8 15:53:19 buro kernel: parport0: irq 7 detected Feb 8 15:53:19 buro kernel: lp0: using parport0 (polling). Feb 8 15:53:19 buro kernel: sis900.c: v1.08.07 11/02/2003 Feb 8 15:53:19 buro kernel: eth0: Realtek RTL8201 PHY transceiver found at address 1. Feb 8 15:53:19 buro kernel: eth0: Using transceiver found at address 1 as default Feb 8 15:53:19 buro kernel: eth0: SiS 900 PCI Fast Ethernet at 0xbc00, IRQ 3, 00:10:dc:e3:d1:97. Feb 8 15:53:19 buro kernel: SCSI subsystem initialized Feb 8 15:53:19 buro kernel: ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device Feb 8 15:53:19 buro kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Feb 8 15:53:19 buro kernel: Vendor: PIONEER Model: DVD-RW DVR-105 Rev: 1.21 Feb 8 15:53:19 buro kernel: Type: CD-ROM ANSI SCSI revision: 02 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: registered new driver usbfs Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: registered new driver hub Feb 8 15:53:19 buro kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 64 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: EHCI Host Controller Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: reset hcc_params 7070 thresh 7 uframes 1024 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: capability 0001 at 70 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: irq 11, pci mem e0899000 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Feb 8 15:53:19 buro kernel: PCI: cache line size of 128 is not supported by device 0000:00:03.3 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: init command 010001 (park)=0 ithresh=1 period=1024 RUN Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: root hub device address 1 Feb 8 15:53:19 buro kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb usb1: Product: EHCI Host Controller Feb 8 15:53:19 buro kernel: usb usb1: Manufacturer: Linux 2.6.2-rc1 ehci_hcd Feb 8 15:53:19 buro kernel: usb usb1: SerialNumber: 0000:00:03.3 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb usb1: registering 1-0:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: hub 1-0:1.0: usb_probe_interface Feb 8 15:53:19 buro kernel: hub 1-0:1.0: usb_probe_interface - got id Feb 8 15:53:19 buro kernel: hub 1-0:1.0: USB hub found Feb 8 15:53:19 buro kernel: hub 1-0:1.0: 6 ports detected Feb 8 15:53:19 buro kernel: hub 1-0:1.0: standalone hub Feb 8 15:53:19 buro kernel: hub 1-0:1.0: ganged power switching Feb 8 15:53:19 buro kernel: hub 1-0:1.0: individual port over-current protection Feb 8 15:53:19 buro kernel: hub 1-0:1.0: Single TT Feb 8 15:53:19 buro kernel: hub 1-0:1.0: TT requires at most 8 FS bit times Feb 8 15:53:19 buro kernel: hub 1-0:1.0: Port indicators are not supported Feb 8 15:53:19 buro kernel: hub 1-0:1.0: power on to power good time: 0ms Feb 8 15:53:19 buro kernel: hub 1-0:1.0: hub controller current requirement: 0mA Feb 8 15:53:19 buro kernel: hub 1-0:1.0: local power source is good Feb 8 15:53:19 buro kernel: hub 1-0:1.0: no over-current condition exists Feb 8 15:53:19 buro kernel: hub 1-0:1.0: enabling power on all ports Feb 8 15:53:19 buro kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Feb 8 15:53:19 buro kernel: ohci_hcd: block sizes: ed 64 td 64 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: USB HC TakeOver from BIOS/SMM Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: reset, control = 0x4 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: irq 9, pci mem e089b000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: root hub device address 1 Feb 8 15:53:19 buro kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb usb2: Product: OHCI Host Controller Feb 8 15:53:19 buro kernel: usb usb2: Manufacturer: Linux 2.6.2-rc1 ohci_hcd Feb 8 15:53:19 buro kernel: usb usb2: SerialNumber: 0000:00:03.0 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb usb2: registering 2-0:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: hub 2-0:1.0: usb_probe_interface Feb 8 15:53:19 buro kernel: hub 2-0:1.0: usb_probe_interface - got id Feb 8 15:53:19 buro kernel: hub 2-0:1.0: USB hub found Feb 8 15:53:19 buro kernel: hub 2-0:1.0: 2 ports detected Feb 8 15:53:19 buro kernel: hub 2-0:1.0: standalone hub Feb 8 15:53:19 buro kernel: hub 2-0:1.0: ganged power switching Feb 8 15:53:19 buro kernel: hub 2-0:1.0: no over-current protection Feb 8 15:53:19 buro kernel: hub 2-0:1.0: Port indicators are not supported Feb 8 15:53:19 buro kernel: hub 2-0:1.0: power on to power good time: 2ms Feb 8 15:53:19 buro kernel: hub 2-0:1.0: hub controller current requirement: 0mA Feb 8 15:53:19 buro kernel: hub 2-0:1.0: local power source is good Feb 8 15:53:19 buro kernel: hub 2-0:1.0: no over-current condition exists Feb 8 15:53:19 buro kernel: hub 2-0:1.0: enabling power on all ports Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: created debug files Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: OHCI controller state Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: OHCI 1.0, with legacy support registers Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: control 0x08f HCFS=operational IE PLE CBSR=3 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: cmdstatus 0x00000 SOC=0 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: intrstatus 0x00000004 SF Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: intrenable 0x80000002 MIE WDH Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: hcca frame #0027 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: roothub.b 00000000 PPCM=0000 DR=0000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: roothub.status 00000000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: roothub.portstatus [0] 0x00000100 PPS Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: roothub.portstatus [1] 0x00000100 PPS Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: OHCI Host Controller Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: USB HC TakeOver from BIOS/SMM Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: reset, control = 0x4 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: irq 3, pci mem e089d000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 1, status 501, change 1, 480 Mb/s Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: root hub device address 1 Feb 8 15:53:19 buro kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb usb3: Product: OHCI Host Controller Feb 8 15:53:19 buro kernel: usb usb3: Manufacturer: Linux 2.6.2-rc1 ohci_hcd Feb 8 15:53:19 buro kernel: usb usb3: SerialNumber: 0000:00:03.1 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb usb3: registering 3-0:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: hub 3-0:1.0: usb_probe_interface Feb 8 15:53:19 buro kernel: hub 3-0:1.0: usb_probe_interface - got id Feb 8 15:53:19 buro kernel: hub 3-0:1.0: USB hub found Feb 8 15:53:19 buro kernel: hub 3-0:1.0: 2 ports detected Feb 8 15:53:19 buro kernel: hub 3-0:1.0: standalone hub Feb 8 15:53:19 buro kernel: hub 3-0:1.0: ganged power switching Feb 8 15:53:19 buro kernel: hub 3-0:1.0: no over-current protection Feb 8 15:53:19 buro kernel: hub 3-0:1.0: Port indicators are not supported Feb 8 15:53:19 buro kernel: hub 3-0:1.0: power on to power good time: 2ms Feb 8 15:53:19 buro kernel: hub 3-0:1.0: hub controller current requirement: 0mA Feb 8 15:53:19 buro kernel: hub 3-0:1.0: local power source is good Feb 8 15:53:19 buro kernel: hub 3-0:1.0: no over-current condition exists Feb 8 15:53:19 buro kernel: hub 3-0:1.0: enabling power on all ports Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: created debug files Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: OHCI controller state Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: OHCI 1.0, with legacy support registers Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: control 0x08f HCFS=operational IE PLE CBSR=3 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: cmdstatus 0x00000 SOC=0 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: intrstatus 0x00000004 SF Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: intrenable 0x80000002 MIE WDH Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: hcca frame #0027 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: roothub.b 00000000 PPCM=0000 DR=0000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: roothub.status 00000000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: roothub.portstatus [0] 0x00000100 PPS Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: roothub.portstatus [1] 0x00000100 PPS Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: OHCI Host Controller Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: USB HC TakeOver from BIOS/SMM Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: reset, control = 0x4 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: irq 13, pci mem e089f000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: root hub device address 1 Feb 8 15:53:19 buro kernel: usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb usb4: Product: OHCI Host Controller Feb 8 15:53:19 buro kernel: usb usb4: Manufacturer: Linux 2.6.2-rc1 ohci_hcd Feb 8 15:53:19 buro kernel: usb usb4: SerialNumber: 0000:00:03.2 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501 Feb 8 15:53:19 buro kernel: usb usb4: registering 4-0:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: hub 4-0:1.0: usb_probe_interface Feb 8 15:53:19 buro kernel: hub 4-0:1.0: usb_probe_interface - got id Feb 8 15:53:19 buro kernel: hub 4-0:1.0: USB hub found Feb 8 15:53:19 buro kernel: hub 4-0:1.0: 2 ports detected Feb 8 15:53:19 buro kernel: hub 4-0:1.0: standalone hub Feb 8 15:53:19 buro kernel: hub 4-0:1.0: ganged power switching Feb 8 15:53:19 buro kernel: hub 4-0:1.0: no over-current protection Feb 8 15:53:19 buro kernel: hub 4-0:1.0: Port indicators are not supported Feb 8 15:53:19 buro kernel: hub 4-0:1.0: power on to power good time: 2ms Feb 8 15:53:19 buro kernel: hub 4-0:1.0: hub controller current requirement: 0mA Feb 8 15:53:19 buro kernel: hub 4-0:1.0: local power source is good Feb 8 15:53:19 buro kernel: hub 4-0:1.0: no over-current condition exists Feb 8 15:53:19 buro kernel: hub 4-0:1.0: enabling power on all ports Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: created debug files Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: OHCI controller state Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: OHCI 1.0, with legacy support registers Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: control 0x08f HCFS=operational IE PLE CBSR=3 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: cmdstatus 0x00000 SOC=0 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: intrstatus 0x00000004 SF Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: intrenable 0x80000002 MIE WDH Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: hcca frame #002e Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: roothub.a 01001202 POTPGT=1 NOCP NPS NDP=2 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: roothub.b 00000000 PPCM=0000 DR=0000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: roothub.status 00000000 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: roothub.portstatus [0] 0x00000100 PPS Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.2: roothub.portstatus [1] 0x00000100 PPS Feb 8 15:53:19 buro kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: port 1 full speed --> companion Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 1 status 003801 POWER OWNER sig=j CONNECT Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 2, status 501, change 1, 480 Mb/s Feb 8 15:53:19 buro kernel: cdrom: sr0: unknown mrw mode page Feb 8 15:53:19 buro kernel: sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Feb 8 15:53:19 buro kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Feb 8 15:53:19 buro kernel: hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: port 2 full speed --> companion Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s Feb 8 15:53:19 buro kernel: hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501 Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: port 5 full speed --> companion Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 5 status 003001 POWER OWNER sig=se0 CONNECT Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS Feb 8 15:53:19 buro kernel: hub 3-0:1.0: port 1, status 101, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Feb 8 15:53:19 buro kernel: hub 3-0:1.0: new USB device on port 1, assigned address 2 Feb 8 15:53:19 buro kernel: usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb 3-1: Product: Medion Flash XL V2.7D Feb 8 15:53:19 buro kernel: usb 3-1: Manufacturer: MEDION Feb 8 15:53:19 buro kernel: usb 3-1: SerialNumber: 2002-78 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb 3-1: registering 3-1:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00010101 CSC PPS CCS Feb 8 15:53:19 buro kernel: hub 3-0:1.0: port 2, status 101, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: hub 3-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS Feb 8 15:53:19 buro kernel: hub 3-0:1.0: new USB device on port 2, assigned address 3 Feb 8 15:53:19 buro kernel: usb 3-2: new device strings: Mfr=0, Product=1, SerialNumber=0 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 3 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb 3-2: Product: SA1100 USB NIC Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: urb dedf6400 path 2 ep0out 73120000 cc 7 --> status -71 Feb 8 15:53:19 buro kernel: usb 3-2: can't set config #1, error -71 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.1: GetStatus roothub.portstatus [2] = 0x00100103 PRSC PPS PES CCS Feb 8 15:53:19 buro kernel: hub 3-0:1.0: new USB device on port 2, assigned address 4 Feb 8 15:53:19 buro kernel: usb 3-2: new device strings: Mfr=0, Product=1, SerialNumber=0 Feb 8 15:53:19 buro kernel: drivers/usb/core/message.c: USB device number 4 default language ID 0x409 Feb 8 15:53:19 buro kernel: usb 3-2: Product: SA1100 USB NIC Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS Feb 8 15:53:19 buro kernel: hub 2-0:1.0: port 1, status 101, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: eth0: Media Link On 100mbps full-duplex Feb 8 15:53:19 buro kernel: hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Feb 8 15:53:19 buro kernel: ohci_hcd 0000:00:03.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Feb 8 15:53:19 buro kernel: hub 2-0:1.0: new USB device on port 1, assigned address 2 Feb 8 15:53:19 buro kernel: usb 2-1: new device strings: Mfr=0, Product=0, SerialNumber=0 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb 2-1: registering 2-1:1.0 (config #1, interface 0) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb 2-1: registering 2-1:1.1 (config #1, interface 1) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: usb 2-1: registering 2-1:1.2 (config #1, interface 2) Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: usb_hotplug Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 1, status 0, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 2, status 0, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: ehci_hcd 0000:00:03.3: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC Feb 8 15:53:19 buro kernel: hub 1-0:1.0: port 5, status 0, change 1, 12 Mb/s Feb 8 15:53:19 buro kernel: ip_tables: (C) 2000-2002 Netfilter core team Feb 8 15:53:19 buro kernel: ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack Feb 8 15:53:19 buro kernel: eth0: Media Link On 100mbps full-duplex Feb 8 15:53:19 buro kernel: Real Time Clock Driver v1.12 Feb 8 15:53:19 buro kernel: Initializing USB Mass Storage driver... Feb 8 15:53:19 buro kernel: usb-storage 3-1:1.0: usb_probe_interface Feb 8 15:53:19 buro kernel: usb-storage 3-1:1.0: usb_probe_interface - got id Feb 8 15:53:19 buro kernel: usb-storage: USB Mass Storage device detected Feb 8 15:53:19 buro kernel: usb-storage: act_altsetting is 0, id_index is 87 Feb 8 15:53:19 buro kernel: usb-storage: -- associate_dev Feb 8 15:53:19 buro kernel: usb-storage: Transport: Bulk Feb 8 15:53:19 buro kernel: usb-storage: Protocol: Transparent SCSI Feb 8 15:53:19 buro kernel: usb-storage: Endpoints: In: 0xde996780 Out: 0xde996794 Int: 0xde9967a8 (Period 10) Feb 8 15:53:19 buro kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 Feb 8 15:53:19 buro kernel: usb-storage: GetMaxLUN command result is 1, data is 3 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: scsi1 : SCSI emulation for USB Mass Storage devices Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Command INQUIRY (6 bytes) Feb 8 15:53:19 buro kernel: usb-storage: 12 00 00 00 24 00 Feb 8 15:53:19 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0xc L 36 F 128 Trg 0 LUN 0 CL 6 Feb 8 15:53:19 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:19 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:19 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:19 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:19 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes Feb 8 15:53:19 buro kernel: usb-storage: Status code 0; transferred 36/36 Feb 8 15:53:19 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:19 buro kernel: usb-storage: Bulk data transfer result 0x0 Feb 8 15:53:19 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:19 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:19 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:19 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:19 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:19 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 Feb 8 15:53:19 buro kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x0 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: Vendor: Medion Model: Flash XL CF Rev: 2.7D Feb 8 15:53:19 buro kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (1:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (2:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (3:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (4:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (5:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (6:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: usb-storage: queuecommand called Feb 8 15:53:19 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:19 buro kernel: usb-storage: Bad target number (7:0) Feb 8 15:53:19 buro kernel: usb-storage: scsi cmd done, result=0x40000 Feb 8 15:53:19 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:19 buro kernel: WARNING: USB Mass Storage data integrity not assured Feb 8 15:53:19 buro kernel: USB Mass Storage device found at 2 Feb 8 15:53:19 buro kernel: drivers/usb/core/usb.c: registered new driver usb-storage Feb 8 15:53:19 buro kernel: USB Mass Storage support registered. Feb 8 15:53:20 buro kernel: intel8x0: clocking to 48000 Feb 8 15:53:20 buro kernel: usbnet 3-2:1.0: usb_probe_interface Feb 8 15:53:20 buro kernel: usbnet 3-2:1.0: usb_probe_interface - got id Feb 8 15:53:20 buro kernel: Bluetooth: Core ver 2.3 Feb 8 15:53:20 buro kernel: NET: Registered protocol family 31 Feb 8 15:53:20 buro kernel: Bluetooth: HCI device and connection manager initialized Feb 8 15:53:20 buro kernel: Bluetooth: HCI socket layer initialized Feb 8 15:53:20 buro kernel: usb-storage: queuecommand called Feb 8 15:53:20 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:20 buro kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) Feb 8 15:53:20 buro kernel: usb-storage: 00 00 00 00 00 00 Feb 8 15:53:20 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x14 L 0 F 0 Trg 0 LUN 0 CL 6 Feb 8 15:53:20 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:20 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:20 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:20 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:20 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:20 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:20 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:20 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x1 Feb 8 15:53:21 buro kernel: usb-storage: -- transport indicates command failure Feb 8 15:53:21 buro kernel: usb-storage: Issuing auto-REQUEST_SENSE Feb 8 15:53:21 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x80000014 L 18 F 128 Trg 0 LUN 0 CL 6 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 18/18 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk data transfer result 0x0 Feb 8 15:53:21 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x80000014 R 0 Stat 0x0 Feb 8 15:53:21 buro kernel: usb-storage: -- Result from auto-sense is 0 Feb 8 15:53:21 buro kernel: usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 Feb 8 15:53:21 buro kernel: usb-storage: (Unknown Key): (unknown ASC/ASCQ) Feb 8 15:53:21 buro kernel: usb-storage: scsi cmd done, result=0x2 Feb 8 15:53:21 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:21 buro kernel: usb-storage: queuecommand called Feb 8 15:53:21 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:21 buro kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) Feb 8 15:53:21 buro kernel: usb-storage: 00 00 00 00 00 00 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x15 L 0 F 0 Trg 0 LUN 0 CL 6 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:21 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x1 Feb 8 15:53:21 buro kernel: usb-storage: -- transport indicates command failure Feb 8 15:53:21 buro kernel: usb-storage: Issuing auto-REQUEST_SENSE Feb 8 15:53:21 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x80000015 L 18 F 128 Trg 0 LUN 0 CL 6 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 18/18 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk data transfer result 0x0 Feb 8 15:53:21 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x80000015 R 0 Stat 0x0 Feb 8 15:53:21 buro kernel: usb-storage: -- Result from auto-sense is 0 Feb 8 15:53:21 buro kernel: usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 Feb 8 15:53:21 buro kernel: usb-storage: (Unknown Key): (unknown ASC/ASCQ) Feb 8 15:53:21 buro kernel: usb-storage: scsi cmd done, result=0x2 Feb 8 15:53:21 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:21 buro kernel: usb-storage: queuecommand called Feb 8 15:53:21 buro kernel: usb-storage: *** thread awakened. Feb 8 15:53:21 buro kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) Feb 8 15:53:21 buro kernel: usb-storage: 00 00 00 00 00 00 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x16 L 0 F 0 Trg 0 LUN 0 CL 6 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:21 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x1 Feb 8 15:53:21 buro kernel: usb-storage: -- transport indicates command failure Feb 8 15:53:21 buro kernel: usb-storage: Issuing auto-REQUEST_SENSE Feb 8 15:53:21 buro kernel: usb-storage: Bulk Command S 0x43425355 T 0x80000016 L 18 F 128 Trg 0 LUN 0 CL 6 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 31/31 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk command transfer result=0 Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes Feb 8 15:53:21 buro kernel: hci_usb: Unknown symbol hci_unregister_dev Feb 8 15:53:21 buro kernel: hci_usb: Unknown symbol hci_register_dev Feb 8 15:53:21 buro kernel: Bluetooth: HCI USB driver ver 2.4 Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 18/18 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk data transfer result 0x0 Feb 8 15:53:21 buro kernel: usb-storage: Attempting to get CSW... Feb 8 15:53:21 buro kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Feb 8 15:53:21 buro kernel: usb-storage: Status code 0; transferred 13/13 Feb 8 15:53:21 buro kernel: usb-storage: -- transfer complete Feb 8 15:53:21 buro kernel: usb-storage: Bulk status result = 0 Feb 8 15:53:21 buro kernel: usb-storage: Bulk Status S 0x53425355 T 0x80000016 R 0 Stat 0x0 Feb 8 15:53:21 buro kernel: usb-storage: -- Result from auto-sense is 0 Feb 8 15:53:21 buro kernel: usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0 Feb 8 15:53:21 buro kernel: usb-storage: (Unknown Key): (unknown ASC/ASCQ) Feb 8 15:53:21 buro kernel: usb-storage: scsi cmd done, result=0x2 Feb 8 15:53:21 buro kernel: usb-storage: *** thread sleeping. Feb 8 15:53:21 buro kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Feb 8 15:53:25 buro kernel: usb 3-2: control timeout on ep0out Feb 8 15:53:25 buro kernel: usbnet: probe of 3-2:1.0 failed with error -110 Feb 8 15:53:25 buro kernel: drivers/usb/core/usb.c: registered new driver usbnet Feb 8 15:53:25 buro kernel: hci_usb 2-1:1.0: usb_probe_interface Feb 8 15:53:25 buro kernel: hci_usb 2-1:1.0: usb_probe_interface - got id Feb 8 15:53:25 buro kernel: hci_usb 2-1:1.1: usb_probe_interface Feb 8 15:53:25 buro kernel: hci_usb 2-1:1.2: usb_probe_interface Feb 8 15:53:25 buro kernel: hci_usb 2-1:1.2: usb_probe_interface - got id Feb 8 15:53:25 buro kernel: drivers/usb/core/usb.c: registered new driver hci_usb Feb 8 15:53:25 buro kernel: NTFS driver 2.1.6 [Flags: R/O MODULE]. Feb 8 15:53:25 buro kernel: NTFS volume version 3.1. Feb 8 15:53:31 buro kernel: ISO 9660 Extensions: RRIP_1991A Feb 8 15:53:36 buro kernel: cdrom: open failed. Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: hdb: No disk in drive Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: hdb: No disk in drive Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:36 buro kernel: hdb: No disk in drive Feb 8 15:53:37 buro kernel: Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Feb 8 15:53:37 buro kernel: ISO 9660 Extensions: RRIP_1991A Feb 8 15:53:37 buro kernel: cdrom: open failed. Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: hdb: No disk in drive Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: hdb: No disk in drive Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:37 buro kernel: hdb: No disk in drive Feb 8 15:53:37 buro kernel: cdrom: open failed. Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: hdb: No disk in drive Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: hdb: No disk in drive Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 0, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: ide-floppy: hdb: I/O error, pc = 1b, key = 2, asc = 3a, ascq = 0 Feb 8 15:53:38 buro kernel: hdb: No disk in drive Feb 8 15:53:44 buro kernel: NET: Registered protocol family 10 Feb 8 15:53:44 buro kernel: Disabled Privacy Extensions on device c02fe220(lo) Feb 8 15:53:44 buro kernel: IPv6 over IPv4 tunneling driver Feb 8 15:53:44 buro kernel: Bluetooth: L2CAP ver 2.1 Feb 8 15:53:44 buro kernel: Bluetooth: L2CAP socket layer initialized Feb 8 15:53:44 buro kernel: hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb de5af414 err -22 Feb 8 15:53:44 buro kernel: hci_usb_isoc_rx_submit: hci0 isoc rx submit failed urb de5af414 err -22 Feb 8 15:53:44 buro kernel: Bluetooth: RFCOMM ver 1.1 Feb 8 15:53:44 buro kernel: Bluetooth: RFCOMM socket layer initialized Feb 8 15:53:47 buro kernel: Bluetooth: RFCOMM TTY layer initialized Feb 8 15:53:47 buro kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.0 Feb 8 15:53:49 buro kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Feb 8 15:53:49 buro kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Feb 8 15:53:54 buro kernel: eth0: no IPv6 routers present ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
