Hi, SpeedTouch behaves properly under WinXP, but switching to RedHat i get the following messages:
Feb 8 16:38:30 aaz-home kernel: usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver. ... Feb 8 16:38:33 aaz-home /etc/hotplug/usb.agent: ... no modules for USB product 6b9/4061/200 somehow small is also /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-24.9 ehci-hcd S: Product=Intel Corp. 82801DB USB EHCI Controller S: SerialNumber=00:1d.7 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms i also noticed, that usbserial kernel module is not automaticely loaded. usb.usermap seems to be set properly. btw. i'v got this (hardware, software and a detailed instruction) from the telekom offering it's standard Internet DSL access with it. I installed speedtouch-1.2-beta1.tgz , speedmgmt.tgz and hotplug-2002_08_26.tgz as they say. Yes, i know i should try newer packages, but can this be the cause. Could somebody help me, please best, zbyszek -- http://zbyszek.evot.org ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
