Fedora Core 1 (kernel 2.4.22 and 2.6.2). Knoppix 3.2 (kernel 2.4.21)
It's recognized, usb-storage loads (by way of hotplug)
lsusb -v gives me:
Bus 001 Device 003: ID 0483:1307 SGS Thomson Microelectronics Cytronix
6in1 card reader
string descriptor 2 invalid (bf bf; len=0)
string descriptor 3 invalid (bf bf; len=0)
string descriptor 4 invalid (bf bf; len=0)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x0483 SGS Thomson Microelectronics
idProduct 0x1307 Cytronix 6in1 card reader
bcdDevice 1.71
iManufacturer 2
iProduct 3
iSerial 4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 100mA
string descriptor 1 invalid (bf bf; len=0)
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Language IDs: (length=4)
0409 English(US)
But when I try to mount (Memory Stick, works flawlessly on other
readers) I receive the "not a valid block device" error on kernel 2.4
and "medium not found" on kernel 2.6.
The relevant /var/log/messages part is:
Feb 11 00:06:14 zyakannazio kernel: hub.c: new USB device 00:07.2-2,
assigned address 5
Feb 11 00:06:17 zyakannazio usb.agent[7683]: missing kernel or user mode
driver usb-storage
Feb 11 00:06:17 zyakannazio kernel: sda: Unit Not Ready, sense:
Feb 11 00:06:17 zyakannazio kernel: Current 00:00: sense key Not Ready
Feb 11 00:06:17 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:17 zyakannazio kernel: usb-uhci.c: interrupt, status 3,
frame# 1215
Feb 11 00:06:17 zyakannazio kernel: sda : READ CAPACITY failed.
Feb 11 00:06:17 zyakannazio kernel: sda : status = 1, message = 00, host
= 0, driver = 08
Feb 11 00:06:17 zyakannazio kernel: Current sd00:00: sense key Not Ready
Feb 11 00:06:17 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:17 zyakannazio kernel: sda : block size assumed to be 512
bytes, disk size 1GB.
Feb 11 00:06:17 zyakannazio kernel: sda: Write Protect is off
Feb 11 00:06:17 zyakannazio kernel: sda: I/O error: dev 08:00, sector 0
Feb 11 00:06:17 zyakannazio kernel: I/O error: dev 08:00, sector 0
Feb 11 00:06:17 zyakannazio kernel: unable to read partition table
Feb 11 00:06:17 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:17 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:21 zyakannazio kernel: sda: Unit Not Ready, sense:
Feb 11 00:06:21 zyakannazio kernel: Current 00:00: sense key Not Ready
Feb 11 00:06:21 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:21 zyakannazio kernel: sda : READ CAPACITY failed.
Feb 11 00:06:21 zyakannazio kernel: sda : status = 1, message = 00, host
= 0, driver = 08
Feb 11 00:06:21 zyakannazio kernel: Current sd00:00: sense key Not Ready
Feb 11 00:06:21 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:21 zyakannazio kernel: sda : block size assumed to be 512
bytes, disk size 1GB.
Feb 11 00:06:21 zyakannazio kernel: sda: Write Protect is off
Feb 11 00:06:21 zyakannazio kernel: sda: I/O error: dev 08:00, sector 0
Feb 11 00:06:21 zyakannazio kernel: I/O error: dev 08:00, sector 0
Feb 11 00:06:21 zyakannazio kernel: unable to read partition table
Feb 11 00:06:21 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:21 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:22 zyakannazio kernel: sda: Unit Not Ready, sense:
Feb 11 00:06:22 zyakannazio kernel: Current 00:00: sense key Not Ready
Feb 11 00:06:22 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:22 zyakannazio kernel: sda : READ CAPACITY failed.
Feb 11 00:06:22 zyakannazio kernel: sda : status = 1, message = 00, host
= 0, driver = 08
Feb 11 00:06:22 zyakannazio kernel: Current sd00:00: sense key Not Ready
Feb 11 00:06:22 zyakannazio kernel: Additional sense indicates Medium
not present
Feb 11 00:06:22 zyakannazio kernel: sda : block size assumed to be 512
bytes, disk size 1GB.
Feb 11 00:06:22 zyakannazio kernel: sda: Write Protect is off
Feb 11 00:06:22 zyakannazio kernel: sda: I/O error: dev 08:00, sector 0
Feb 11 00:06:22 zyakannazio kernel: I/O error: dev 08:00, sector 0
Feb 11 00:06:22 zyakannazio kernel: unable to read partition table
Feb 11 00:06:22 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:22 zyakannazio kernel: Device not ready. Make sure there
is a disc in the drive.
Feb 11 00:06:23 zyakannazio devlabel: devlabel service started/restarted
The device description is:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=0483 ProdID=1307 Rev= 1.71
S: Manufacturer=Generic
S: Product=USBMass Storage Device
S: SerialNumber=0123456789ABCDEF
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
--
Cesar Cardoso - [EMAIL PROTECTED] - www.zyakannazio.eti.br
"O torcedor encontra no banheiro papel eug�nico"
(Luciano do Valle)
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
