Hello,
I'm trying to help a friend who has recently come in to possession of a
Kangaroo external USB hard
drive manufactured by
www.interactivemediacorp.com.
He'd like to use it under
rh9. I have not found any docs on this particular drive.
I've got the box already installed and at the time of install this drive was
not attached. I've got the hotplug and usbutils rpms installed as well as
enabled kudzu on boot. I'm getting an error: This device does not have a
valid driver attached. The complete dmesg output is below.
If anyone has this working or recommendations i'd appreciate
it.
Thanks.
Dave.
* Initial dmesg output (snipped)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:43:19 Dec 1 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:04.2
usb-uhci.c: USB UHCI at I/O 0xfce0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:04.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x5ab/0x202) is not claimed by any active
driver.
* device disconnection (snipped)
usb.c: USB disconnect on device 00:04.2-2 address 2
hub.c: new USB device 00:04.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x5ab/0x202) is not claimed by any active
driver.
* more /proc/bus/usb/drivers devices
[EMAIL PROTECTED]:/proc/bus/usb#more devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=0202 Rev= 1.05
S: Manufacturer=ISD
S: Product=USB to IDE Adapter
S: SerialNumber=81c8b6e0-30d1-11d4-9ab6-cf6cc1bade46
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
[7m--More--(0%)[m
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[EMAIL PROTECTED]:/proc/bus/usb#more drivers
usbdevfs
hub
96-111: hiddev
hid
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
